v2NonVolClearDevice

BRCM-V2-FACTORY-MIB · .1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.10
MIB view Table view

Object

scalar r/w SNMPv2-TCTruthValue 
Setting this object to true(1) will tell the nonvol device to wipe out 
the section specified in v2NonVolControlSection.  All data will be 
lost; the device should be restored to its 'virgin' state.  For flash
devices, the flash block is erased; for disk devices, the file is 
erased.  Note that this operation occurs over all groups, so the value
of v2NonVolControlGroup is ignored by this operation.  Always returns
false(2) when read.

Context

MIB
BRCM-V2-FACTORY-MIB
OID
.1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.10
Type
scalar
Access
readwrite
Status
current
Parent
v2NonVolControl
Siblings
9

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
v2NonVolControlGroup
Identifies which entry in the v2FactNonVolTable will be affected by control operations from this group. Must be either a value of v2NonVolIndex or zero. If zero is used, the con…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.1
v2NonVolControlSection
Identifies which section of the group identified by v2NonVolControlGroup will be affected by control operations from this group.
scalarEnumeration.1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.2
v2NonVolRestoreDefaults
When set to true(1), causes the group identified by v2NonVolControlGroup to have its values restored to factory defaults. Always returns false(2) when read. Setting to false(2) …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.3
v2NonVolTftpServer
Controls and reflects the IP address of a TFTP server from which non-vol settings will be downloaded if v2NonVolDloadNow is set to true(1), into the group specified in v2NonVolCo…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.4
v2NonVolTftpPath
Controls and reflects the path of a file on a TFTP server from which a non-vol settings will be downloaded if v2NonVolDloadNow is set to true(1), into the group specified in v2Non…
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.5
v2NonVolDloadNow
If set to true(1), a new non vol image will be downloaded from the IP address specified by v2NonVolDloadTftpServer, the file to download having been specified by v2NonVolDloadTftp…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.6
v2NonVolDloadStatus
Indicates the status of the last non-vol download attempt.
scalarEnumeration.1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.7
v2NonVolDelExtraData
Setting this object to true(1) will get rid of any extra data that is assiociated with the settings group specified by v2NonVolControlGroup and the section specified by v2NonVolC…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.8
v2NonVolFlush
Setting this object to true(1) will flush out any unrecognized groups that were read from the device. This is useful in cases where the settings group isn't needed by another a…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.9