sTunnelShortHold
BINTEC-STUNNEL-MIB ·
.0.12.1.2.1.22
Object
column
r/w
Integer32
The ShortHold is the number of seconds after which an inactive connection is closed. Is the ShortHold set to -1 it is never closed for the reason of inactivity.
Context
- MIB
- BINTEC-STUNNEL-MIB
- OID
.0.12.1.2.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sTunnelEntry
- Table
- sTunnelTable
- Siblings
- 27
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-3600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sTunnelIndex The Index gives (should give) an unique ID for the STunnel. | column | Integer32 | .0.12.1.2.1.1 |
| sTunnelPrivateToken The PrivateToken is sent with the first packet as soon as
the connection is established. It is used if the remote side
wants to receive several connections on the same port and th… | column | OctetString | .0.12.1.2.1.10 |
| sTunnelVerifyPeer If VerifyPeer is set to 'none'(1) no SSL verification is done.
Setting VerifyPeer to 'normal'(2) a normal SSL verification is done
(certificates are checked). If it is set to 'hig… | column | Enumeration | .0.12.1.2.1.11 |
| sTunnelCertificateIdx The (row) index of the CertTable holding the wanted peer certificate
for the connection. | column | Integer32 | .0.12.1.2.1.12 |
| sTunnelCACertificateIdx The (row) index of the CertTable holding the wanted/needed CA certificate
for the connection. | column | Integer32 | .0.12.1.2.1.13 |
| sTunnelRemoteCertSubject when VerifyPeer set to 'high' the string in this field is compared
with the subjectname of the remote peer certificate. | column | OctetString | .0.12.1.2.1.14 |
| sTunnelRemoteCertSerialNo when VerifyPeer set to 'very_high' the string in this field
is compared with the serial number of the remote peer certificate. | column | OctetString | .0.12.1.2.1.15 |
| sTunnelRemoteCertDns when VerifyPeer set to 'very_high' the string in this field
is compared with the DNS attribute within the subject alternative
names of the remote peer certificate. But if this va… | column | OctetString | .0.12.1.2.1.16 |
| sTunnelCertificateStatus The certificatestatus displays if and which error occured during
the certificate validation. If no error occured it is ok(2).
The four possible errors are the cert is untrusted(3)… | column | Enumeration | .0.12.1.2.1.17 |
| sTunnelRetries The number of retries which were already done during the
actual e.g. last connection. | column | Integer32 | .0.12.1.2.1.18 |
| sTunnelRetryTime The time in seconds which the system waits for a reconnection
try if the last try failed. | column | Integer32 | .0.12.1.2.1.19 |
| sTunnelAdminStatus The AdminStatus of one entry declares whether this peer should
be established (up) or not (down). In case of setting the AdminStatus
to 'delete' the entry will be deleted. | column | Enumeration | .0.12.1.2.1.2 |
| sTunnelMaxRetries The maximum number of retries till the system declares
the connection to failed. In case of '-1' infinite retries
will take place. | column | Integer32 | .0.12.1.2.1.20 |
| sTunnelReopenDelay The time till the connection will be reopened. | column | Integer32 | .0.12.1.2.1.21 |
| sTunnelDebug enables(2) or disables(1) debug messages for this peer. | column | Enumeration | .0.12.1.2.1.23 |
| sTunnelLastStatusChange This value shows the time since the last sTunnelStatus change. | column | SNMPv2-SMITimeTicks | .0.12.1.2.1.24 |
| sTunnelRxBytes The amount of received (data) bytes from the external connection.
Only the real data bytes
(without any header or encryption/hash are counted). | column | SNMPv2-SMICounter32 | .0.12.1.2.1.25 |
| sTunnelTxBytes The amount of transmitted bytes towards the external connection.
Only the real data bytes
(without any header or encryption/hash are counted). | column | SNMPv2-SMICounter32 | .0.12.1.2.1.26 |
| sTunnelTCPConnections Counts the SSL-TCP-Connections of this tunnel. | column | Integer32 | .0.12.1.2.1.27 |
| sTunnelStatus The (operational) status of the connection. 'up'(1) means the
connection is fully established.
'down'(2) means the connection is (finally) down.
'wait-for-retry'(3) means the sys… | column | Enumeration | .0.12.1.2.1.28 |
| sTunnelDescription The description of the Stunnel. Is only for giving each tunnel
a name but has no further meaning e.g. function. | column | OctetString | .0.12.1.2.1.3 |
| sTunnelExternalIp This field holds the IP to or from which the SSL connection
will be established. If it is set (not 0) in
ExternalMode_server the remote IP (incoming connection) is
checked again… | column | SNMPv2-SMIIpAddress | .0.12.1.2.1.4 |
| sTunnelExternalPort The port of the external connection. In ExternalMode client
it defines the port it is connected to and in ExternalMode server
it defines the port it is listened on for incoming co… | column | Integer32 | .0.12.1.2.1.5 |
| sTunnelExternalMode The ExternalMode declares whether the system is server or client
to the outside e.g. SSL connection. | column | Enumeration | .0.12.1.2.1.6 |
| sTunnelInternalIp The InternalIp default value is 127.0.0.1 (localhost).
That means that the internal stunnel endpoint is the system
itself and connects to an internal service
(telnet,snmp,syslog… | column | SNMPv2-SMIIpAddress | .0.12.1.2.1.7 |
| sTunnelInternalPort The port on which will be connected internally in InternalMode client or
on which will be listened on for an incoming connection. | column | Integer32 | .0.12.1.2.1.8 |
| sTunnelInternalMode The InternalMode declares whether the system is server or client
to the inside connection (NON-SSL connection). | column | Enumeration | .0.12.1.2.1.9 |