ipDhcpPoolTftpServer2

BINTEC-DYNIP-MIB · .0.52.3.1.12
Commands MIB view Table view

Object

column r/w SNMPv2-SMIIpAddress 
The IP address of the second TFTP server given to the client 
via 'TFTP server option' (DHCP option 150).
If in case of manual assigned IP address either 
ipStatAddrTftpServer1 or ipStatAddrTftpServer2 value
is assigned (i.e. is not 255.255.255.255), 
ipDhcpPoolTftpServer1 and ipDhcpPoolTftpServer2 are ignored 
in favor of these parameters.
If ipDhcpPoolTftpServer2 is 0.0.0.0, then only the IP address 
specified in ipDhcpPoolTftpServer1 will be considered. If both 
addresses are 0.0.0.0, no DHCP option 150 will be returned to 
the client.

Context

MIB
BINTEC-DYNIP-MIB
OID
.0.52.3.1.12
Type
column
Access
readwrite
Status
current
Parent
ipDhcpPoolEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BINTEC-DYNIP-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BINTEC-DYNIP-MIB::ipDhcpPoolTftpServer2'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'BINTEC-DYNIP-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BINTEC-DYNIP-MIB::ipDhcpPoolTftpServer2.<ipDhcpPoolIfIndex>.<ipDhcpPoolDynAddrPoolId>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'BINTEC-DYNIP-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'BINTEC-DYNIP-MIB::ipDhcpPoolTftpServer2'

Syntax

SNMPv2-SMIIpAddress
Source
SNMPv2-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4