mdmProfileIdleTimerMode

The idle timer is used to specify the duration of an interval between
successive characters received from the modem which, when exceeded,
will cause the modem driver to terminate the assembly of a data packet
and to forward it to the higher-layer protocols (this is in analogy to
the ITU X.3 parameter #4). This object specifies the mode how the idle
timer is set:
  static  (1): the idle time is taken from the object
               mdmProfileIdleTimerFixedDelay (default)
  dynamic (2): the idle time is set to the duration that a number of
               mdmProfileIdleTimerCharDelay characters (octets) would
               take for transmission corresponding to the actually
               used receive bit-rate of the modem. If the bit-rate can
               not be found out, the static mode is used instead.

MIB

BIANCA-BRICK-MIBMODEM-MIB

OID

.1.3.6.1.4.1.272.4.18.1.1.16

Type

column

Access

readwrite

Status

mandatory

Parent

mdmProfileEntry