bdifthThresholdRowStatus
BDCOM-IF-THRESHOLD-MIB ·
.1.3.6.1.4.1.3320.9.218.1.1.5.1.11
Object
This object is used to create and delete thresholds in
templates.
A new entry can only be created when there is an active entry
in the bdifthTemplateTable with the same value of
bdifthTemplateIndex. The values of bdifthThresholdObject,
bdifthThresholdSeverity, bdifthThresholdType, and
bdifthThresholdFiredValue must be provided before activating the
entry. If the value of bdifthTemplateNotifyHoldDownType in the
bdifthTemplateEntry with the same value of bdifthTemplateIndex is
'fireAndClearThresholds', then the value of
bdifthThresholdClearedValue must also be provided before
activating the entry. If the value of bdifthThresholdType is
other than 'rateOfIncreaseExponentXIfSpeed', then the value of
bdifthThresholdSampleInterval must also be provided before
activating the entry.
When an entry is activated, if there are any entries in
bdifthTemplateIfAssignTable with the same value of
bdifthTemplateIndex, then the threshold is activated on all
interfaces identified in those entries that have instances of
the object identified by bdifthThresholdObject.
When an entry is destroyed, if there are any entries in
bdifthTemplateIfAssignTable with the same value of
bdifthTemplateIndex, then the threshold is de-activated on the
interfaces identified in those entries. If there are any
entries in bdifthIfThresholdFiredTable with
bdifthIfThresholdFiredTemplate value equal to this value of
bdifthTemplateIndex, then the bit in bdifthIfThresholdsFired
corresponding to this threshold is cleared in all such entries.
After the entry has been activated, this object cannot be set
to any value other than 'destroy'. The row status never
changes to 'notInService' after reaching the value 'active'.
Context
- MIB
- BDCOM-IF-THRESHOLD-MIB
- OID
.1.3.6.1.4.1.3320.9.218.1.1.5.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- bdifthThresholdEntry
- Table
- bdifthThresholdTable
- Siblings
- 10
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bdifthThresholdIndex An arbitrary integer that uniquely identifies a threshold in
a threshold template. The value for each threshold must remain
constant when the agent's network management system is… | column | BdifthThresholdIndex | .1.3.6.1.4.1.3320.9.218.1.1.5.1.1 |
| bdifthThresholdApsSwitchover This object indicates whether automatic protection switching
(APS) switchover should be triggered, if applicable, when the
threshold is fired. The value of this object takes effe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3320.9.218.1.1.5.1.10 |
| bdifthThresholdDescr A description of the threshold's function and use. The
description must not include carriage returns. | column | OctetString | .1.3.6.1.4.1.3320.9.218.1.1.5.1.2 |
| bdifthThresholdObject The object to be compared against the threshold values.
The object must be defined in a table indexed only by ifIndex.
All of the instance portion of the object identifier is
trun… | column | ObjectIdentifier | .1.3.6.1.4.1.3320.9.218.1.1.5.1.3 |
| bdifthThresholdSeverity This object specifies the severity associated with the
condition when the threshold is exceeded. | column | BdifthThresholdSeverity | .1.3.6.1.4.1.3320.9.218.1.1.5.1.4 |
| bdifthThresholdType The manner in which to compare bdifthThresholdObject to
bdifthThresholdFiredValue and bdifthThresholdClearedValue.
The value 'absoluteValue' indicates that the valu… | column | Enumeration | .1.3.6.1.4.1.3320.9.218.1.1.5.1.5 |
| bdifthThresholdDirection This object indicates which direction of movement causes the
threshold to fire.
The value 'rising' indicates that the threshold is fired when
the current sampled va… | column | Enumeration | .1.3.6.1.4.1.3320.9.218.1.1.5.1.6 |
| bdifthThresholdFiredValue A threshold value to check against the object identified in
bdifthThresholdObject. If the value of bdifthThresholdDirection
is 'rising', then the threshold is fired when the curr… | column | Integer32 | .1.3.6.1.4.1.3320.9.218.1.1.5.1.7 |
| bdifthThresholdClearedValue A threshold value to check against the object identified in
bdifthThresholdObject. If the value of bdifthThresholdDirection
is 'rising', then the threshold is cleared when the cu… | column | Integer32 | .1.3.6.1.4.1.3320.9.218.1.1.5.1.8 |
| bdifthThresholdSampleInterval The number of milliseconds to wait between samples of the
object identified in bdifthThresholdObject. To encourage
consistency in sampling, the interval is measured from the
begi… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.3320.9.218.1.1.5.1.9 |