bdifthThresholdObject
BDCOM-IF-THRESHOLD-MIB ·
.1.3.6.1.4.1.3320.9.218.1.1.5.1.3
Object
column
r/w
ObjectIdentifier
The object to be compared against the threshold values.
The object must be defined in a table indexed only by ifIndex.
All of the instance portion of the object identifier is
truncated, since the instance(s) to be compared against
the threshold are identified using the
bdifthTemplateIfAssignTable.
If the object has syntax 'Integer32', 'Unsigned32', or
'Gauge32', then bdifthThresholdType should be set to
'absoluteValue'. If the object has syntax 'Counter32' or
'Counter64', then bdifthThresholdType should be set to
'deltaValue' or 'rateOfIncreaseExponentXIfSpeed'.
Context
- MIB
- BDCOM-IF-THRESHOLD-MIB
- OID
.1.3.6.1.4.1.3320.9.218.1.1.5.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- bdifthThresholdEntry
- Table
- bdifthThresholdTable
- Siblings
- 10
Syntax
ObjectIdentifier
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bdifthThresholdIndex An arbitrary integer that uniquely identifies a threshold in
a threshold template. The value for each threshold must remain
constant when the agent's network management system is… | column | BdifthThresholdIndex | .1.3.6.1.4.1.3320.9.218.1.1.5.1.1 |
| bdifthThresholdApsSwitchover This object indicates whether automatic protection switching
(APS) switchover should be triggered, if applicable, when the
threshold is fired. The value of this object takes effe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3320.9.218.1.1.5.1.10 |
| bdifthThresholdRowStatus This object is used to create and delete thresholds in
templates.
A new entry can only be created when there is an active entry
in the bdifthTemplateTable with the … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3320.9.218.1.1.5.1.11 |
| bdifthThresholdDescr A description of the threshold's function and use. The
description must not include carriage returns. | column | OctetString | .1.3.6.1.4.1.3320.9.218.1.1.5.1.2 |
| bdifthThresholdSeverity This object specifies the severity associated with the
condition when the threshold is exceeded. | column | BdifthThresholdSeverity | .1.3.6.1.4.1.3320.9.218.1.1.5.1.4 |
| bdifthThresholdType The manner in which to compare bdifthThresholdObject to
bdifthThresholdFiredValue and bdifthThresholdClearedValue.
The value 'absoluteValue' indicates that the valu… | column | Enumeration | .1.3.6.1.4.1.3320.9.218.1.1.5.1.5 |
| bdifthThresholdDirection This object indicates which direction of movement causes the
threshold to fire.
The value 'rising' indicates that the threshold is fired when
the current sampled va… | column | Enumeration | .1.3.6.1.4.1.3320.9.218.1.1.5.1.6 |
| bdifthThresholdFiredValue A threshold value to check against the object identified in
bdifthThresholdObject. If the value of bdifthThresholdDirection
is 'rising', then the threshold is fired when the curr… | column | Integer32 | .1.3.6.1.4.1.3320.9.218.1.1.5.1.7 |
| bdifthThresholdClearedValue A threshold value to check against the object identified in
bdifthThresholdObject. If the value of bdifthThresholdDirection
is 'rising', then the threshold is cleared when the cu… | column | Integer32 | .1.3.6.1.4.1.3320.9.218.1.1.5.1.8 |
| bdifthThresholdSampleInterval The number of milliseconds to wait between samples of the
object identified in bdifthThresholdObject. To encourage
consistency in sampling, the interval is measured from the
begi… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.3320.9.218.1.1.5.1.9 |