bsIpv6MldSnoopingInterfaceProxyIfIndex

BAY-STACK-IPV6-MLD-SNOOPING-MIB · .1.3.6.1.4.1.45.5.44.1.1.1.11
Commands MIB view Table view

Object

column r/w IF-MIBInterfaceIndexOrZero 
Some devices implement a form of MLD proxying whereby
memberships learned on the interface represented by this
row, cause MLD Multicast Listener Reports to be sent on
the internetwork-layer interface identified by this
object.  Such a device would implement mldRouterMIBGroup
only on its router interfaces (those interfaces with
non-zero mldInterfaceProxyIfIndex).  Typically, the
value of this object is 0, indicating that no proxying
is being done.

Context

MIB
BAY-STACK-IPV6-MLD-SNOOPING-MIB
OID
.1.3.6.1.4.1.45.5.44.1.1.1.11
Type
column
Access
readwrite
Status
current
Parent
bsIpv6MldSnoopingInterfaceEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BAY-STACK-IPV6-MLD-SNOOPING-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BAY-STACK-IPV6-MLD-SNOOPING-MIB::bsIpv6MldSnoopingInterfaceProxyIfIndex'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'BAY-STACK-IPV6-MLD-SNOOPING-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BAY-STACK-IPV6-MLD-SNOOPING-MIB::bsIpv6MldSnoopingInterfaceProxyIfIndex.<bsIpv6MldSnoopingInterfaceIfIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'BAY-STACK-IPV6-MLD-SNOOPING-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'BAY-STACK-IPV6-MLD-SNOOPING-MIB::bsIpv6MldSnoopingInterfaceProxyIfIndex'

Syntax

IF-MIBInterfaceIndexOrZero
Source
IF-MIBInterfaceIndexOrZero
Base type
Integer32
Display format
d
Type Description
This textual convention is an extension of the
InterfaceIndex convention.  The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system.  This extension permits the
additional value of zero.  the value zero is object-specific
and must therefore be defined as part of the description of
any object which uses this syntax.  Examples of the usage of
zero might include situations where interface was unknown,
or when none or all interfaces need to be referenced.

Values & Constraints

Type Constraints
range: 0..2147483647