awcVlanAllowEncrypted

AWC-VLAN-CFG-MIB · .1.3.6.1.4.1.522.3.21.1.4
MIB view Table view

Object

scalar r/w SNMPv2-TCTruthValue 
When this attribute is true, the STA shall
indicate at the MAC service interface received
MSDUs regardless of the setting of the WEP
subfield of the Frame Control field, so long
as no other VLAN parameters necessitate use
of encryption. The default value of this attribute
shall be true.
          
The general use for awcVlanAllowEncrypted to be
true even when no static WEP keys are set for
a VLAN is to allow a station to utilize EAP
authentication to encrypt directed packets,
even while multicast packets are unencrypted.

Context

MIB
AWC-VLAN-CFG-MIB
OID
.1.3.6.1.4.1.522.3.21.1.4
Type
scalar
Access
readwrite
Status
current
Parent
awcVlanCfgObjects
Siblings
7

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
awcMaxVlanIds
The Maximum number of discrete VLAN IDs supported. The VLAN IDs need not be consecutive.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.522.3.21.1.1
awcVlanEncapMode
The encapsulation mode setting controls transmit tagging logic for all ports. The value of this object is derived from other settings within the VLAN MIB.
scalarAwcVlanEncapType.1.3.6.1.4.1.522.3.21.1.2
awcNativeVlanId
Native VLAN ID for the device. The default Native VLAN ID is 0, for no VLAN ID. If the device is attached to an Ethernet bridge/switch VLAN port then a non-zero Native VLAN ID m…
scalarAWCVX-MIBAwcVlanId.1.3.6.1.4.1.522.3.21.1.3
awcVlanAnyEnabled
When this attribute is true, VLAN operation of the system is enabled when any awcVlanEnabled value is true. When this attribute is false, VLAN operation is disabled. The awcVl…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.522.3.21.1.5
awcVlanCfgTable
A table used for configuring and managing VLANS.
table-.1.3.6.1.4.1.522.3.21.1.6
awcVlanNUcastKeyTable
Default Shared WEP Keys for all 802.11 packets transmitted and received as non-VLAN-tagged frames over a port with the Port VLAN ID specified as awcVlanIndex. If WEP encryptio…
table-.1.3.6.1.4.1.522.3.21.1.7
awcVlanAllowUnencryptedVlanId
Single VLAN ID on which unencrypted packets are allowed. The default Unencrypted VLAN ID is 0, meaning that all VLANs require full encryption.
scalarAWCVX-MIBAwcVlanId.1.3.6.1.4.1.522.3.21.1.8