arubaWiredLldpXdot3RemPowerClassExtB

ARUBAWIRED-LLDP-MIB · .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.18
MIB view Table view

Object

column r/w Enumeration 
For a dual-signature PD, a read-only value that indicates
the currently assigned Class for Mode A by the remote 4-pair
PSE. For a single-signature PD, or a dual-signature PD connected
to a 2-pair only PSE, a read-only value set to 'singlesig'
 by the remote PSE. For a PSE connected to a dualsignature PD,
a read-only value that indicates the requested Class for Mode B
during Physical Layer classification by the remote PD. For a
PSE connected to a single-signature PD, a read-only value set
to 'singlesig' by the remote PD.

Context

MIB
ARUBAWIRED-LLDP-MIB
OID
.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.18
Type
column
Access
readwrite
Status
current
Parent
arubaWiredLldpXdot3RemPowerEntry
Table
arubaWiredLldpXdot3RemPowerTable
Siblings
25

Syntax

Enumeration

Values & Constraints

Enumerated Values
1singlesig
2class1
3class2
4class3
5class4
6class5

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
arubaWiredLldpXdot3RemPowerPortClass
The value that identifies the port Class of the given port associated with the remote system.
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.1
arubaWiredLldpXdot3RemPDRequestedPowerValue
It indicates the maximum input average power the PD is requesting in units of 0.1 W.
columnInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.10
arubaWiredLldpXdot3RemPDRequestedPowerValueA
It indicates the PD requested power value for the Mode A pairset in units of 0.1 W.
columnInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.11
arubaWiredLldpXdot3RemPDRequestedPowerValueB
It indicates the PD requested power value for the Mode B pairset in units of 0.1 W.
columnInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.12
arubaWiredLldpXdot3RemPSEAllocatedPowerValue
It indicates the PSE allocated power value received from the remote system. For a PSE, it is the PSE allocated power value that was echoed back by the remote PD, in units of 0.1 W.
columnInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.13
arubaWiredLldpXdot3RemPSEAllocatedPowerValueA
It indicates the PSE allocated power value for the Alternative A pairset received from the remote system. For a PSE, it is the PSE allocated power value for the Alternative A pair…
columnInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.14
arubaWiredLldpXdot3RemPSEAllocatedPowerValueB
It indicates the PSE allocated power value for the Alternative B pairset received from the remote system. For a PSE, it is the PSE allocated power value for the Alternative A pair…
columnInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.15
arubaWiredLldpXdot3RemPDPoweredStatus
This field indicates the existing powered configuration of the PD and thus indicate that the PD is using the 'PD requested power value' field or is using the 'PD requested power v…
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.16
arubaWiredLldpXdot3RemPowerClassExtA
For a dual-signature PD, a read-only value that indicates the currently assigned Class for Mode A by the remote 4-pair PSE. For a single-signature PD, or a dual-signature PD conne…
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.17
arubaWiredLldpXdot3RemPowerClassExt
For a single-signature PD or a dual-signature PD connected to a 2-pair only PSE, a read-only value that indicates the currently assigned Class by the remote PSE. For a dual- signa…
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.19
arubaWiredLldpXdot3RemPowerMDISupported
The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.2
arubaWiredLldpXdot3RemPowerTypeExt
This field indicates if the remote system is a Type 3 or Type 4 PSE or PD, and in the case of a Type 3 or Type 4 PD, if it is a single-signature PD or dual-signature PD
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.20
arubaWiredLldpXdot3RemPDLoad
The truth value used to indicate whether the load of the remote dual-signature PD is electrically isolated. For a PD this attribute is set to FALSE
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.21
arubaWiredLldpXdot3RemPD4PID
The truth value used to indicate whether the remote PD system supports powering of both PD Modes
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.22
arubaWiredLldpXdot3RemPSEMaxAvailPower
It indicates the remote PSE maximum available power value in units of 0.1 W.
columnInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.23
arubaWiredLldpXdot3RemAutoclassRequest
It indicates whether the remote PD system is requesting an Autoclass measurement
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.24
arubaWiredLldpXdot3RemPowerDownRequest
It indicates that the remote PD system is requesting a power down when the value is 0x1D
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.25
arubaWiredLldpXdot3RemPowerDownTime
It indicates the number of seconds the remote PD requests to stay powered off. A value of zero indicates an indefinite amount of time.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.26
arubaWiredLldpXdot3RemPowerMDIEnabled
The truth value used to indicate whether the MDI power is enabled on given port associated with the remote system.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.3
arubaWiredLldpXdot3RemPowerPairControlable
The truth value used to indicate the ability to control which PSE Pinout Alternative is used for PD detection and power.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.4
arubaWiredLldpXdot3RemPowerPairs
The truth value that identifies the PSE Pinout Alternative in use for detecting and supplying power to the PD.
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.5
arubaWiredLldpXdot3RemPowerClass
The truth value that indicates the requested Class of the PD.
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.6
arubaWiredLldpXdot3RemPowerType
This field reflects the actual remote power type.
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.7
arubaWiredLldpXdot3RemPowerSource
This field reflects the remote device (PD) requested power source. This field is encoded as pseAndLocal(4) when a PD being powered both locally and by a PSE, to local(3) when the …
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.8
arubaWiredLldpXdot3RemPowerPriority
This field reflects the requested remote device power priority. When the power type is PD, this field shall be set to the power priority configured for the device. If a PD is unab…
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.9