arubaWiredLldpXdot3RemPDLoad
ARUBAWIRED-LLDP-MIB ·
.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.21
Object
column
SNMPv2-TCTruthValue
The truth value used to indicate whether the load of the remote dual-signature PD is electrically isolated. For a PD this attribute is set to FALSE
Context
- MIB
- ARUBAWIRED-LLDP-MIB
- OID
.1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.21- Type
- column
- Access
- readonly
- Status
- current
- Parent
- arubaWiredLldpXdot3RemPowerEntry
- Table
- arubaWiredLldpXdot3RemPowerTable
- Siblings
- 25
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| arubaWiredLldpXdot3RemPowerPortClass The value that identifies the port Class of the given port
associated with the remote system. | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.1 |
| arubaWiredLldpXdot3RemPDRequestedPowerValue It indicates the maximum input average power the PD is
requesting in units of 0.1 W. | column | Integer32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.10 |
| arubaWiredLldpXdot3RemPDRequestedPowerValueA It indicates the PD requested power value for the Mode A
pairset in units of 0.1 W. | column | Integer32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.11 |
| arubaWiredLldpXdot3RemPDRequestedPowerValueB It indicates the PD requested power value for the Mode B
pairset in units of 0.1 W. | column | Integer32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.12 |
| arubaWiredLldpXdot3RemPSEAllocatedPowerValue It indicates the PSE allocated power value received from
the remote system. For a PSE, it is the PSE allocated power
value that was echoed back by the remote PD, in units of
0.1 W. | column | Integer32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.13 |
| arubaWiredLldpXdot3RemPSEAllocatedPowerValueA It indicates the PSE allocated power value for the Alternative
A pairset received from the remote system. For a PSE, it is the
PSE allocated power value for the Alternative A pair… | column | Integer32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.14 |
| arubaWiredLldpXdot3RemPSEAllocatedPowerValueB It indicates the PSE allocated power value for the Alternative
B pairset received from the remote system. For a PSE, it is the
PSE allocated power value for the Alternative A pair… | column | Integer32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.15 |
| arubaWiredLldpXdot3RemPDPoweredStatus This field indicates the existing powered configuration
of the PD and thus indicate that the PD is using the 'PD
requested power value' field or is using the 'PD requested
power v… | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.16 |
| arubaWiredLldpXdot3RemPowerClassExtA For a dual-signature PD, a read-only value that indicates
the currently assigned Class for Mode A by the remote 4-pair
PSE. For a single-signature PD, or a dual-signature PD
conne… | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.17 |
| arubaWiredLldpXdot3RemPowerClassExtB For a dual-signature PD, a read-only value that indicates
the currently assigned Class for Mode A by the remote 4-pair
PSE. For a single-signature PD, or a dual-signature PD conne… | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.18 |
| arubaWiredLldpXdot3RemPowerClassExt For a single-signature PD or a dual-signature PD connected
to a 2-pair only PSE, a read-only value that indicates the
currently assigned Class by the remote PSE. For a dual-
signa… | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.19 |
| arubaWiredLldpXdot3RemPowerMDISupported The truth value used to indicate whether the MDI power is
supported on the given port associated with the remote system. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.2 |
| arubaWiredLldpXdot3RemPowerTypeExt This field indicates if the remote system is a Type 3 or
Type 4 PSE or PD, and in the case of a Type 3 or Type 4 PD,
if it is a single-signature PD or dual-signature PD | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.20 |
| arubaWiredLldpXdot3RemPD4PID The truth value used to indicate whether the remote PD
system supports powering of both PD Modes | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.22 |
| arubaWiredLldpXdot3RemPSEMaxAvailPower It indicates the remote PSE maximum available power value
in units of 0.1 W. | column | Integer32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.23 |
| arubaWiredLldpXdot3RemAutoclassRequest It indicates whether the remote PD system is requesting
an Autoclass measurement | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.24 |
| arubaWiredLldpXdot3RemPowerDownRequest It indicates that the remote PD system is requesting
a power down when the value is 0x1D | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.25 |
| arubaWiredLldpXdot3RemPowerDownTime It indicates the number of seconds the remote PD
requests to stay powered off. A value of zero
indicates an indefinite amount of time. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.26 |
| arubaWiredLldpXdot3RemPowerMDIEnabled The truth value used to indicate whether the MDI power is
enabled on given port associated with the remote system. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.3 |
| arubaWiredLldpXdot3RemPowerPairControlable The truth value used to indicate the ability to control which
PSE Pinout Alternative is used for PD detection and power. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.4 |
| arubaWiredLldpXdot3RemPowerPairs The truth value that identifies the PSE Pinout Alternative in
use for detecting and supplying power to the PD. | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.5 |
| arubaWiredLldpXdot3RemPowerClass The truth value that indicates the requested Class of the PD. | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.6 |
| arubaWiredLldpXdot3RemPowerType This field reflects the actual remote power type. | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.7 |
| arubaWiredLldpXdot3RemPowerSource This field reflects the remote device (PD) requested
power source. This field is encoded as
pseAndLocal(4) when a PD being powered both
locally and by a PSE, to local(3) when the … | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.8 |
| arubaWiredLldpXdot3RemPowerPriority This field reflects the requested remote device power
priority. When the power type is PD, this field shall
be set to the power priority configured for the device.
If a PD is unab… | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.9 |