arubaWiredLldpXdot3LocPowerPriority

ARUBAWIRED-LLDP-MIB · .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.9
MIB view Table view

Object

column r/w Enumeration 
This field reflects the requested local device power
priority. When the power type is PD, this field shall
be set to the power priority configured for the device.
If a PD is unable to determine its power priority or
it has not been configured, then this field shall be
set to unknown(1). When the power type is PSE, this
field shall be set to unknown(1).

Context

MIB
ARUBAWIRED-LLDP-MIB
OID
.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.9
Type
column
Access
readwrite
Status
current
Parent
arubaWiredLldpXdot3LocPowerEntry
Table
arubaWiredLldpXdot3LocPowerTable
Siblings
26

Syntax

Enumeration

Values & Constraints

Enumerated Values
1unknown
2critical
3high
4low

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
arubaWiredLldpXdot3LocPowerPortClass
The value that identifies the port Class of the given port associated with the local system.
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.1
arubaWiredLldpXdot3LocPDRequestedPowerValue
It indicates the maximum input average power the PD is requesting in units of 0.1 W.
columnInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.10
arubaWiredLldpXdot3LocPDRequestedPowerValueA
It indicates the PD requested power value for the Mode A pairset in units of 0.1 W.
columnInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.11
arubaWiredLldpXdot3LocPDRequestedPowerValueB
It indicates the PD requested power value for the Mode B pairset in units of 0.1 W.
columnInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.12
arubaWiredLldpXdot3LocPSEAllocatedPowerValue
It indicates the maximum input average power the PSE expects the PD to draw in units of 0.1 W.
columnInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.13
arubaWiredLldpXdot3LocPSEAllocatedPowerValueA
It indicates the maximum input average power levels the PSE expects the dual-signature PD to draw, in units of 0.1 W, on Alternative A, when the PSE provides power over 4-pair.
columnInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.14
arubaWiredLldpXdot3LocPSEAllocatedPowerValueB
It indicates the maximum input average power levels the PSE expects the dual-signature PD to draw, in units of 0.1 W, on Alternative B, when the PSE provides power over 4-pair.
columnInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.15
arubaWiredLldpXdot3LocPSEPoweringStatus
This field reflects the existing powering configuration of the PSE and thus indicates that the PSE is using the 'PSE allocated power value' field or is using the 'PSE allocated po…
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.16
arubaWiredLldpXdot3LocPowerPairsExt
This field indicates the supported PSE Pinout Alternative. For a PD the contents of this attribute are undefined
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.17
arubaWiredLldpXdot3LocPowerClassExtA
For a dual-signature PD, it indicates the requested Class for Mode A during Physical Layer Classification. For a single-signature PD, a read-only value set to 'singlesig'. For a P…
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.18
arubaWiredLldpXdot3LocPowerClassExtB
For a dual-signature PD, it indicates the requested Class for Mode B during Physical Layer Classification. For a single-signature PD, a read-only value set to 'singlesig'. For a P…
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.19
arubaWiredLldpXdot3LocPowerMDISupported
The truth value used to indicate whether the MDI power is supported on the given port associated with the local system.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.2
arubaWiredLldpXdot3LocPowerClassExt
For a single-signature PD, it indicates the requested Class during Physical Layer Classification. For a dual-signature PD, the value is set to 'dualsig'. For a PSE connected to a …
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.20
arubaWiredLldpXdot3LocPowerTypeExt
This field indicates if the local system is a Type 3 or Type 4 PSE or PD, and in the case of a Type 3 or Type 4 PD, if it is a single-signature PD or a dual-signature PD
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.21
arubaWiredLldpXdot3LocPDLoad
The truth value used to indicate whether the load of a dual- signature PD is electrically isolated. For a single-signature PD, or a PSE, the value of this attribute is FALSE.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.22
arubaWiredLldpXdot3LocPSEMaxAvailPower
It indicates the local PSE maximum available power value in units of 0.1 W.
columnInteger32.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.23
arubaWiredLldpXdot3LocPSEAutoclassSupport
It indicates whether the local PSE system supports Autoclass
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.24
arubaWiredLldpXdot3LocAutoclassCompleted
It indicates whether the local PSE system has completed the Autoclass measurement
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.25
arubaWiredLldpLocPseTlvSentType
This field specifies the set of TLVs that are actually sent by the PSE
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.26
arubaWiredLldpLocPdTlvSentType
This field specifies the set of TLVs that are actually sent by the PD
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.27
arubaWiredLldpXdot3LocPowerMDIEnabled
The truth value used to indicate whether the MDI power is enabled on given port associated with the local system.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.3
arubaWiredLldpXdot3LocPowerPairControlable
The truth value used to indicate the ability to control which PSE Pinout Alternative is used for PD detection and power.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.4
arubaWiredLldpXdot3LocPowerPairs
The truth value that identifies the PSE Pinout Alternative in use for detecting and supplying power to the PD.
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.5
arubaWiredLldpXdot3LocPowerClass
The truth value that indicates the requested Class of the PD.
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.6
arubaWiredLldpXdot3LocPowerType
This field reflects the actual local power type.
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.7
arubaWiredLldpXdot3LocPowerSource
This field reflects the requested local device power source. When the power type is PSE, this field shall be set to primary(2) when the PSE is sourcing its power through the PI fr…
columnEnumeration.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.8