arubaWiredLldpXdot3LocPowerPairs
ARUBAWIRED-LLDP-MIB ·
.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.5
Object
column
Enumeration
The truth value that identifies the PSE Pinout Alternative in use for detecting and supplying power to the PD.
Context
- MIB
- ARUBAWIRED-LLDP-MIB
- OID
.1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- arubaWiredLldpXdot3LocPowerEntry
- Table
- arubaWiredLldpXdot3LocPowerTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | pairSignal |
2 | pairSpare |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| arubaWiredLldpXdot3LocPowerPortClass The value that identifies the port Class of the given port
associated with the local system. | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.1 |
| arubaWiredLldpXdot3LocPDRequestedPowerValue It indicates the maximum input average power the PD is
requesting in units of 0.1 W. | column | Integer32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.10 |
| arubaWiredLldpXdot3LocPDRequestedPowerValueA It indicates the PD requested power value for the Mode A
pairset in units of 0.1 W. | column | Integer32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.11 |
| arubaWiredLldpXdot3LocPDRequestedPowerValueB It indicates the PD requested power value for the Mode B
pairset in units of 0.1 W. | column | Integer32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.12 |
| arubaWiredLldpXdot3LocPSEAllocatedPowerValue It indicates the maximum input average power the
PSE expects the PD to draw in units of 0.1 W. | column | Integer32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.13 |
| arubaWiredLldpXdot3LocPSEAllocatedPowerValueA It indicates the maximum input average power levels the PSE
expects the dual-signature PD to draw, in units of 0.1 W, on
Alternative A, when the PSE provides power over 4-pair. | column | Integer32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.14 |
| arubaWiredLldpXdot3LocPSEAllocatedPowerValueB It indicates the maximum input average power levels the PSE
expects the dual-signature PD to draw, in units of 0.1 W, on
Alternative B, when the PSE provides power over 4-pair. | column | Integer32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.15 |
| arubaWiredLldpXdot3LocPSEPoweringStatus This field reflects the existing powering configuration
of the PSE and thus indicates that the PSE is using the
'PSE allocated power value' field or is using the 'PSE
allocated po… | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.16 |
| arubaWiredLldpXdot3LocPowerPairsExt This field indicates the supported PSE Pinout Alternative.
For a PD the contents of this attribute are undefined | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.17 |
| arubaWiredLldpXdot3LocPowerClassExtA For a dual-signature PD, it indicates the requested Class for
Mode A during Physical Layer Classification. For a single-signature
PD, a read-only value set to 'singlesig'. For a P… | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.18 |
| arubaWiredLldpXdot3LocPowerClassExtB For a dual-signature PD, it indicates the requested Class for
Mode B during Physical Layer Classification. For a single-signature
PD, a read-only value set to 'singlesig'. For a P… | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.19 |
| arubaWiredLldpXdot3LocPowerMDISupported The truth value used to indicate whether the MDI power is
supported on the given port associated with the local system. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.2 |
| arubaWiredLldpXdot3LocPowerClassExt For a single-signature PD, it indicates the requested Class
during Physical Layer Classification. For a dual-signature PD,
the value is set to 'dualsig'. For a PSE connected to a
… | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.20 |
| arubaWiredLldpXdot3LocPowerTypeExt This field indicates if the local system is a Type 3 or Type 4
PSE or PD, and in the case of a Type 3 or Type 4 PD, if it is a
single-signature PD or a dual-signature PD | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.21 |
| arubaWiredLldpXdot3LocPDLoad The truth value used to indicate whether the load of a dual-
signature PD is electrically isolated. For a single-signature
PD, or a PSE, the value of this attribute is FALSE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.22 |
| arubaWiredLldpXdot3LocPSEMaxAvailPower It indicates the local PSE maximum available power value
in units of 0.1 W. | column | Integer32 | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.23 |
| arubaWiredLldpXdot3LocPSEAutoclassSupport It indicates whether the local PSE system supports Autoclass | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.24 |
| arubaWiredLldpXdot3LocAutoclassCompleted It indicates whether the local PSE system has completed
the Autoclass measurement | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.25 |
| arubaWiredLldpLocPseTlvSentType This field specifies the set of TLVs that are actually
sent by the PSE | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.26 |
| arubaWiredLldpLocPdTlvSentType This field specifies the set of TLVs that are actually
sent by the PD | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.27 |
| arubaWiredLldpXdot3LocPowerMDIEnabled The truth value used to indicate whether the MDI power is
enabled on given port associated with the local system. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.3 |
| arubaWiredLldpXdot3LocPowerPairControlable The truth value used to indicate the ability to control which
PSE Pinout Alternative is used for PD detection and power. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.4 |
| arubaWiredLldpXdot3LocPowerClass The truth value that indicates the requested Class of the PD. | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.6 |
| arubaWiredLldpXdot3LocPowerType This field reflects the actual local power type. | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.7 |
| arubaWiredLldpXdot3LocPowerSource This field reflects the requested local device power
source. When the power type is PSE, this field shall
be set to primary(2) when the PSE is sourcing its power
through the PI fr… | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.8 |
| arubaWiredLldpXdot3LocPowerPriority This field reflects the requested local device power
priority. When the power type is PD, this field shall
be set to the power priority configured for the device.
If a PD is unabl… | column | Enumeration | .1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.9 |