apSecurityStatus
APSECURITY-MIB ·
.1.3.6.1.4.1.9148.3.9.2.10
Object
scalar
Enumeration
Status.
Context
- MIB
- APSECURITY-MIB
- OID
.1.3.6.1.4.1.9148.3.9.2.10- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- apSecurityNotificationObjects
- Siblings
- 27
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | success |
2 | failure |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| apSecuritySpi Tunnel security-policy-index. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9148.3.9.2.1 |
| apSecurityDateTime Time as configured at the Net-Net SBC when an
event completes. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9148.3.9.2.11 |
| apSecurityUser User name | scalar | OctetString | .1.3.6.1.4.1.9148.3.9.2.12 |
| apSecurityPeerPort IKE peer port | scalar | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9148.3.9.2.13 |
| apSecurityPeerIpAddress IKE peer IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9148.3.9.2.14 |
| apSecurityCRLServer CRL Server FQDN if configured. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9148.3.9.2.15 |
| apSecurityCRLRetrievalFailureCause Reason for failure in the CRL retrieval. | scalar | Enumeration | .1.3.6.1.4.1.9148.3.9.2.16 |
| apSecurityLastSuccessfulCRLRetrieval Last successful CRL retrieval. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9148.3.9.2.17 |
| apSecurityCRLServerIPAddress CRL Server IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9148.3.9.2.18 |
| apSecurityGTPProfileName GTP Profile Name configured. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9148.3.9.2.19 |
| apSecuritySrcIpAddress Source IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9148.3.9.2.2 |
| apSecurityGTPHostName GGSN Host Name if configured. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9148.3.9.2.20 |
| apSecurityGTPLinkFailureCause Reason for failure in the GTPCRL retrieval. | scalar | Enumeration | .1.3.6.1.4.1.9148.3.9.2.21 |
| apSecurityGTPIPAddress GGSN IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9148.3.9.2.22 |
| apSecuritySrcAddressFamily Source IP address family IPv4 or IPv6. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9148.3.9.2.23 |
| apSecuritySrcAddress Source IP address. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9148.3.9.2.24 |
| apSecurityDstAddressFamily Destination IP address family IPv4 or IPv6. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9148.3.9.2.25 |
| apSecurityDstAddress Destination IP address. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9148.3.9.2.26 |
| apSecurityPeerAddressFamily IKE peer IP address family IPv4 or IPv6. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9148.3.9.2.27 |
| apSecurityPeerAddress IKE peer IP address. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9148.3.9.2.28 |
| apSecurityDstIpAddress Destination IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9148.3.9.2.3 |
| apSecurityIPSECMode IPSec mode. | scalar | Enumeration | .1.3.6.1.4.1.9148.3.9.2.4 |
| apSecurityEncryptionAlg Type of the encryption algorithms supported in the tunnel setup. | scalar | Enumeration | .1.3.6.1.4.1.9148.3.9.2.5 |
| apSecurityAuthAlg Type of the authentication algorithms supported in the tunnel setup. | scalar | Enumeration | .1.3.6.1.4.1.9148.3.9.2.6 |
| apSecuritySecProtocol Type of the security protocol supported in the tunnel setup. | scalar | Enumeration | .1.3.6.1.4.1.9148.3.9.2.7 |
| apSecurityFailureCause Reason for failure in the IKE, IPSec or RADIUS areas. | scalar | Enumeration | .1.3.6.1.4.1.9148.3.9.2.8 |
| apSecurityFailureArea Where the failure happened. | scalar | Enumeration | .1.3.6.1.4.1.9148.3.9.2.9 |