vrrpNewCfgVirtRtrGrpIfIndex
ALTEON-CHEETAH-NETWORK-MIB ·
.1.3.6.1.4.1.1872.2.5.3.1.6.10.1.3
Object
The IfIndex that the VRRP virtual router is representing.
Context
- MIB
- ALTEON-CHEETAH-NETWORK-MIB
- OID
.1.3.6.1.4.1.1872.2.5.3.1.6.10.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vrrpNewCfgVirtRtrGrpTableEntry
- Table
- vrrpNewCfgVirtRtrGrpTable
- Siblings
- 15
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vrrpNewCfgVirtRtrGrpIndx The VRRP virtual router table index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.1 |
| vrrpNewCfgVirtRtrGrpTckVirtRtr Enable or disable tracking other virtual routers for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckVirtRtrInc. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.10 |
| vrrpNewCfgVirtRtrGrpTckIpIntf Enable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.11 |
| vrrpNewCfgVirtRtrGrpTckVlanPort Enable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.12 |
| vrrpNewCfgVirtRtrGrpTckL4Port Enable or disable tracking Layer 4 port states for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckL4PortInc. This is applied when
virtual server is co… | column | Enumeration | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.13 |
| vrrpNewCfgVirtRtrGrpTckRServer Enable or disable tracking real server states for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckRServerInc. This is applied when
virtual server is co… | column | Enumeration | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.14 |
| vrrpNewCfgVirtRtrGrpTckHsrp Enable or disable tracking HSRP advertisements for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckHsrpInc. This is applied when
virtual server is conf… | column | Enumeration | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.15 |
| vrrpNewCfgVirtRtrGrpTckHsrv Enable or disable tracking HSRP by VLAN advertisements for
priority adjustment. The priority increment is defined
in vrrpNewCfgGenTckHsrvInc. This is applied when
virtual server… | column | Enumeration | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.16 |
| vrrpNewCfgVirtRtrGrpID The VRRP virtual router identifier. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.2 |
| vrrpNewCfgVirtRtrGrpInterval The time interval between VRRP advertisements in seconds. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.4 |
| vrrpNewCfgVirtRtrGrpPriority The priority value to be used by the specified VRRP virtual router. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.5 |
| vrrpNewCfgVirtRtrGrpPreempt This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit p… | column | Enumeration | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.6 |
| vrrpNewCfgVirtRtrGrpState Enable or disable the VRRP virtual router. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.7 |
| vrrpNewCfgVirtRtrGrpDelete When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of… | column | Enumeration | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.8 |
| vrrpNewCfgVirtRtrGrpSharing Enable or disable load sharing of non-master virtual router. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.3.1.6.10.1.9 |