alaSaaEthoamCtrlTgtMAC

ALCATEL-IND1-SAA-MIB · .1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.6
MIB view Table view

Object

column r/w SNMPv2-TCMacAddress 
The Target MAC Address of the destination to which the Ethernet
Loopback or DMM message is to be sent: A unicast
destination MAC address. Either alaSaaEthoamCtrlTgtMepId or
alaSaaEthoamCtrlTgtMAC should be specified while configuring
an alaSaaEthoamCtrlEntry.

Context

MIB
ALCATEL-IND1-SAA-MIB
OID
.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.6
Type
column
Access
readwrite
Status
current
Parent
alaSaaEthoamCtrlEntry
Table
alaSaaEthoamCtrlTable
Siblings
26

Syntax

SNMPv2-TCMacAddress
Source
SNMPv2-TCMacAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 6

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alaSaaEthoamCtrlOwnerIndex
Owner name to identify entries in the table. This is currently not supported and its value will always be the string 'USER'.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.1
alaSaaEthoamCtrlPktTimeOut
The maximum time to wait for the reply of the transmitted packet.
columnmilli-seconds SNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.10
alaSaaEthoamCtrlNumPkts
The number of packets to be sent in one iteration of Eth-LB/DMM test.Configuration of number of packets and inter packet delay should be such that total execution time remains les…
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.11
alaSaaEthoamCtrlInterPktDelay
Specifies the delay between two consecutive packets transmitted during an iteration. The value specified should be a multiple of 100.
columnmilli-seconds Integer32.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.12
alaSaaEthoamCtrlPktData
An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent.
columnOctetString.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.13
alaSaaEthoamCtrlVlanPriority
Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame.
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.14
alaSaaEthoamCtrlDropEligible
Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.15
alaSaaEthoamCtrlTotalPktsRcvd
Specifies the total number of packets received during all the Eth-LB/DMM iterations.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.16
alaSaaEthoamCtrlTotalPktsSent
Specifies the total number of packets sent during all the Eth-LB/DMM iterations.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.17
alaSaaEthoamCtrlMinRTT
Specifies the minimum round trip time among all the iterations of the SAA.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.18
alaSaaEthoamCtrlAvgRTT
Specifies the average round trip time of all the iterations of the SAA.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.19
alaSaaEthoamCtrlTestIndex
Unique name to identify the entries in the table. This name is unique across various SNMP users.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.2
alaSaaEthoamCtrlMaxRTT
Specifies the maximum round trip time among all the iterations of the SAA.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.20
alaSaaEthoamCtrlMinJitter
Specifies the minimum jitter among all the iterations of the SAA.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.21
alaSaaEthoamCtrlAvgJitter
Specifies the average jitter of all the iterations of the SAA.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.22
alaSaaEthoamCtrlMaxJitter
Specifies the maximum jitter among all the iterations of the SAA.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.23
alaSaaEthoamCtrlTSMinRTT
The timestamp of the iteration that gave the minimum packet delay.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.24
alaSaaEthoamCtrlTSMaxRTT
The timestamp of the iteration that gave the maximum packet delay.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.25
alaSaaEthoamCtrlTSMinJitter
The timestamp of the iteration that gave the minimum packet jitter.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.26
alaSaaEthoamCtrlTSMaxJitter
The timestamp of the iteration that gave the maximum packet jitter.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.27
alaSaaEthoamCtrlRowStatus
This object allows entries to be created and deleted in the alaSaaEthoamCtrlTable. Deletion of an entry in this table results in all corresponding (same alaSaaEthoamCtrlOwnerInde…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.3
alaSaaEthoamCtrlTestMode
Specifies the type of Ethernet OAM test defined by this entry. ethernetLoopback - tests connectivity and round trip time by sending loopback r…
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.4
alaSaaEthoamCtrlTgtMepId
The Mep-Id of the destination to which the Ethernet Loopback or DMM message is to be sent. Either alaSaaEthoamCtrlTgtMepId or alaSaaEthoamCtrlTgtMAC should be specified while conf…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.5
alaSaaEthoamCtrlSrcMepId
The Mep-Id of the source node initiating the Ethernet Loopback or DMM message.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.7
alaSaaEthoamCtrlDomainName
The name of the domain to which the source Mep belongs.
columnIEEE8021-CFM-MIBDot1agCfmMaintDomainName.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.8
alaSaaEthoamCtrlAssociationName
The name of the association in the domain (specified by alaSaaEthoamCtrlDomainName) to which the source Mep belongs.
columnIEEE8021-CFM-MIBDot1agCfmMaintAssocName.1.3.6.1.4.1.6486.800.1.2.1.55.1.1.5.1.1.9