alaIPsecSecurityPolicyPriority

ALCATEL-IND1-IPSEC-MIB · .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.18

MIB view Table view

Object

column r/w Integer32

The priority for this policy.  When traffic would be covered by
multiple policies the policy with the highest priority value is
used.  If two policies have the same priority, the one configured
first has precedence.

Context

MIB: ALCATEL-IND1-IPSEC-MIB
OID: .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.18
Type: column
Access: readwrite
Status: current
Parent: alaIPsecSecurityPolicyEntry
Table: alaIPsecSecurityPolicyTable
Siblings: 18

Syntax

Integer32

Values & Constraints

Object Constraints

range: 1-1000

Related Objects

Sibling Objects

Object	Type	Syntax	OID
alaIPsecSecurityPolicyID A unique identifier for this security policy. When creating a new policy, a zero value must be specified. An available policy ID will then be automatically assigned to the pol…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.1`
alaIPsecSecurityPolicyULProtocol The upper-layer protocol of packets covered by this policy. To match all protocols, specify the 255 wildcard value. A wildcard policy will only be used when there is no exact mat…	column	IPsecULProtocol	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.10`
alaIPsecSecurityPolicyICMPv6Type If the upper-layer protocol is ICMPv6, an ICMPv6 type value may be specified to restrict the policy to a specific packet type. To match all ICMPv6 packets, the 0 wi…	column	Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.11`
alaIPsecSecurityPolicyDirection The direction of traffic covered by this policy.	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.12`
alaIPsecSecurityPolicyName A name for this policy.	column	IPsecName	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.13`
alaIPsecSecurityPolicyDescription A detailed description of this policy.	column	IPsecDescription	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.14`
alaIPsecSecurityPolicyAction The action to take on traffic covered by this policy. discard(0) means that all traffic covered by the policy will be discarded. ipsec(2) means that …	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.15`
alaIPsecSecurityPolicyAdminState Allows a policy to be administratively enabled or disabled.	column	IPsecAdminState	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.16`
alaIPsecSecurityPolicyOperationalState The operational state of this policy.	column	IPsecOperationalState	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.17`
alaIPsecSecurityPolicyRowStatus Used to control the addition and removal of security policy entries.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.19`
alaIPsecSecurityPolicySourceType The type of source address specified.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.2`
alaIPsecSecurityPolicySource The source of packets covered by this policy.	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.3`
alaIPsecSecurityPolicySourcePrefixLength The number of bits of the source address used to determine which packets are covered by this policy. The default value varies depending upon the type of source add…	column	IPsecPrefixLength	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.4`
alaIPsecSecurityPolicySourcePort The source port of packets covered by this policy. To match packets from any port, specify the 0 wildcard value. A wildcard policy will only be used when there is no exact match…	column	IPsecPortNumber	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.5`
alaIPsecSecurityPolicyDestinationType The type of destination address specified.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.6`
alaIPsecSecurityPolicyDestination The destination of packets covered by this policy.	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.7`
alaIPsecSecurityPolicyDestinationPrefixLength The number of bits of the destination prefix used to determine which packets are covered by this policy. The default value varies depending upon the type of destin…	column	IPsecPrefixLength	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.8`
alaIPsecSecurityPolicyDestinationPort The destination port of packets covered by this policy. To match packets from any port, specify the 0 wildcard value. A wildcard policy will only be used when there is no exact …	column	IPsecPortNumber	`.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.9`