alaIPsecSecurityPolicyOperationalState
ALCATEL-IND1-IPSEC-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.17
Object
column
IPsecOperationalState
The operational state of this policy.
Context
- MIB
- ALCATEL-IND1-IPSEC-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.17- Type
- column
- Access
- readonly
- Status
- current
- Parent
- alaIPsecSecurityPolicyEntry
- Table
- alaIPsecSecurityPolicyTable
- Siblings
- 18
Syntax
IPsecOperationalState
- Source
- IPsecOperationalState
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
3 | dnspending |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaIPsecSecurityPolicyID A unique identifier for this security policy. When creating a
new policy, a zero value must be specified. An available
policy ID will then be automatically assigned to the pol… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.1 |
| alaIPsecSecurityPolicyULProtocol The upper-layer protocol of packets covered by this policy.
To match all protocols, specify the 255 wildcard value. A wildcard
policy will only be used when there is no exact mat… | column | IPsecULProtocol | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.10 |
| alaIPsecSecurityPolicyICMPv6Type If the upper-layer protocol is ICMPv6, an ICMPv6 type value may
be specified to restrict the policy to a specific packet type.
To match all ICMPv6 packets, the 0 wi… | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.11 |
| alaIPsecSecurityPolicyDirection The direction of traffic covered by this policy. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.12 |
| alaIPsecSecurityPolicyName A name for this policy. | column | IPsecName | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.13 |
| alaIPsecSecurityPolicyDescription A detailed description of this policy. | column | IPsecDescription | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.14 |
| alaIPsecSecurityPolicyAction The action to take on traffic covered by this policy.
discard(0) means that all traffic covered by the policy
will be discarded.
ipsec(2) means that … | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.15 |
| alaIPsecSecurityPolicyAdminState Allows a policy to be administratively enabled or
disabled. | column | IPsecAdminState | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.16 |
| alaIPsecSecurityPolicyPriority The priority for this policy. When traffic would be covered by
multiple policies the policy with the highest priority value is
used. If two policies have the same priority, the … | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.18 |
| alaIPsecSecurityPolicyRowStatus Used to control the addition and removal of security
policy entries. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.19 |
| alaIPsecSecurityPolicySourceType The type of source address specified. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.2 |
| alaIPsecSecurityPolicySource The source of packets covered by this policy. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.3 |
| alaIPsecSecurityPolicySourcePrefixLength The number of bits of the source address used to determine
which packets are covered by this policy.
The default value varies depending upon the type of
source add… | column | IPsecPrefixLength | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.4 |
| alaIPsecSecurityPolicySourcePort The source port of packets covered by this policy. To
match packets from any port, specify the 0 wildcard value. A
wildcard policy will only be used when there is no exact match… | column | IPsecPortNumber | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.5 |
| alaIPsecSecurityPolicyDestinationType The type of destination address specified. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.6 |
| alaIPsecSecurityPolicyDestination The destination of packets covered by this policy. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.7 |
| alaIPsecSecurityPolicyDestinationPrefixLength The number of bits of the destination prefix used to determine
which packets are covered by this policy.
The default value varies depending upon the type of
destin… | column | IPsecPrefixLength | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.8 |
| alaIPsecSecurityPolicyDestinationPort The destination port of packets covered by this policy. To
match packets from any port, specify the 0 wildcard value. A
wildcard policy will only be used when there is no exact … | column | IPsecPortNumber | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.2.1.9 |