alaIPsecSAConfigDescription
ALCATEL-IND1-IPSEC-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.9
Object
column
r/w
IPsecDescription
A detailed description for the manually created IPsec SA.
Context
- MIB
- ALCATEL-IND1-IPSEC-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- alaIPsecSAConfigEntry
- Table
- alaIPsecSAConfigTable
- Siblings
- 14
Syntax
IPsecDescription
- Source
- IPsecDescription
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..200
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaIPsecSAConfigID A unique identifier for this manually configured SA.
When creating a new SA, a zero value must be specified.
An available ID will then be automatically assigned to
the SA. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.1 |
| alaIPsecSAConfigEncryptionAlgorithm For an ESP SA, defines the encryption algorithm to be used.
none(0) should be specified if ESP is being used for integrity
only. If null(11) is specified,
alaIPsecSAConfigAuthen… | column | IPsecESPAlgorithm | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.10 |
| alaIPsecSAConfigEncryptionKeyLength For those algorithms where multiple key lengths are supported,
specifies the key length to be used. Zero may be specified to
use the default key length. | column | bits SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.11 |
| alaIPsecSAConfigAuthenticationAlgorithm Defines the authentication algorithm to be used.
For ESP SAs, none(0) may be specified for encryption-only ESP.
For ESP integrity-only, ESP integrity and encryption… | column | IPsecAHAlgorithm | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.12 |
| alaIPsecSAConfigAdminState Allows a manually configured SA to be administratively enabled
or disabled. | column | IPsecAdminState | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.13 |
| alaIPsecSAConfigOperationalState The operational state of the manually configured SA. | column | IPsecOperationalState | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.14 |
| alaIPsecSAConfigRowStatus Used to control the addition and removal of manually configured
IPsec SAs. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.15 |
| alaIPsecSAConfigType The type of this SA: AH or ESP. Once set,
the type may not be changed. | column | IPsecSAType | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.2 |
| alaIPsecSAConfigSourceType The type of source address specified. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.3 |
| alaIPsecSAConfigSource The source of packets covered by this SA. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.4 |
| alaIPsecSAConfigDestinationType The type of destination address specified. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.5 |
| alaIPsecSAConfigDestination The destination of packets covered by this SA. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.6 |
| alaIPsecSAConfigSPI The Security Parameters Index (SPI) of this SA. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.7 |
| alaIPsecSAConfigName The name of this manually configured SA. | column | IPsecName | .1.3.6.1.4.1.6486.800.1.2.1.43.1.1.4.1.8 |