alaIgmpMaxGroupExceedAction

ALCATEL-IND1-IGMP-MIB · .1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.16
MIB view Table view

Object

scalar r/w Enumeration 
The global configuration of action to be taken when IGMP group membership limit is exceeded on a 
port/vlan instance.

Context

MIB
ALCATEL-IND1-IGMP-MIB
OID
.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.16
Type
scalar
Access
readwrite
Status
current
Parent
alaIgmp
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
0none
1drop
2replace

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alaIgmpStatus
Administratively enable IPv4 multicast switching and routing on the system.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.1
alaIgmpRouterTimeout
The IGMP Router Timeout on the system.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.10
alaIgmpSourceTimeout
The IGMP Source Timeout on the system.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.11
alaIgmpProxying
Administratively enable IGMP Proxying on the system.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.12
alaIgmpUnsolicitedReportInterval
The IGMP Unsolicited Report Interval on the system.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.13
alaIgmpQuerierForwarding
Administratively enable IGMP Querier Forwarding on the system.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.14
alaIgmpMaxGroupLimit
The global limit on maximum number of IGMP Group memberships that can be learnt on each port/vlan instance.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.15
alaIgmpFloodUnknown
Administratively enable flooding of multicast data packets during flow learning and setup.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.17
alaIgmpHelperAddressType
Set the address type of the helper address. Must be ipv4(1) and set at the same time as alaIgmpHelperAddress.
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.18
alaIgmpHelperAddress
The configured IPv4 helper address. When an IGMP report or leave is received by the device it will remove the IP header and regenerate a new IP header with a destination IP addre…
scalarOctetString.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.19
alaIgmpQuerying
Administratively enable IGMP Querying on the system.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.2
alaIgmpBufferPacket
Administratively enable buffering and routing of initial multicast packets in case of flood and prune multicast routing protocols
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.20
alaIgmpIndexSharing
Set the IGMP Index Sharing mode for IPv4 multicast entries in hardware.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.21
alaDynamicControlStatus
All IPv4 or IPv6 multicast protocols are copied to the CPU
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.22
alaDynamicControlIpv4Status
If enabled traffic will be forwarded without any CPU processing. If disabled traffic will be trapped to CPU for processing.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.23
alaIgmpSpoofing
Administratively enable IGMP Spoofing on the system.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.3
alaIgmpZapping
Administratively enable IGMP Zapping on the system.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.4
alaIgmpVersion
Set the default IGMP protocol Version running on the system.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.5
alaIgmpRobustness
Set the IGMP Robustness variable used on the system.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.6
alaIgmpQueryInterval
Set the IGMP Query Interval used on the system.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.7
alaIgmpQueryResponseInterval
Set the IGMP Query Response Interval on the system.
scalartenths of seconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.8
alaIgmpLastMemberQueryInterval
Set the IGMP Last Member Query Interval on the system.
scalartenths of seconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.800.1.2.1.34.1.1.1.9