alaErpRingWaitToRestoreTimer
ALCATEL-IND1-ERP-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.8
Object
column
r/w
Unsigned32
This object is valid only for RPL Node.
This timer is started to prevent frequent operation switch due
to an intermittent defect.
It may be configured by the operator in 1 minute steps between
0 and 12 minutes.
Context
- MIB
- ALCATEL-IND1-ERP-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- alaErpRingEntry
- Table
- alaErpRingTable
- Siblings
- 17
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-12
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaErpRingId Ring identifier that is unique in the bridge. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.1 |
| alaErpRingClearStats Defines per ring clear statistics control for ERP.
The value reset (1) indicates that ERP should clear all
statistics related to a ring in the system.By default,
this object conta… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.10 |
| alaErpRingLastStateChange The time (SysUpTime) at which the ethernet ring last
entered either the IDLE or PROTECTION state. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.11 |
| alaErpRingTimeToRevert Defines the time left to revert from Protection State to Idle State. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.12 |
| alaErpRingRowStatus The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.13 |
| alaErpRingVirtualChannel A Integer value indicating whether the ring is operating with the
Virtual channel enabled or not. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.14 |
| alaErpRingRevertive A Integer value indicating whether the ring is operating with the
revertive mode enabled or not | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.15 |
| alaErpRingClearAction Defines clear action for ERP ring
The value reset(1) will give CLEAR action to ERP state machine | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.16 |
| alaErpRingActiveVersion This object indicates active ERP Ring protocol version. | column | Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.17 |
| alaErpRingResetVersionFallback Resets ERP running protocol | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.18 |
| alaErpRingServiceVid An integer indicating the VID of Service VLAN. All the ERP
control traffic will flow with Service VLAN tag across the
ring. This object must be specified while creating a row in
t… | column | Q-BRIDGE-MIBVlanId | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.2 |
| alaErpRingMEGLevel MEG level of the R-APS PDU to be inserted for this Ring.
This object must be specified while creating a row in
this table. Once the row has been created, the value of
this object… | column | AlaErpRingMEGLevel | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.3 |
| alaErpRingPort1 This object is the interface index of the ring port,which is
either a bridge port, or an aggregated link within a bridge,
on which ring is configured.
There can be only two ring p… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.4 |
| alaErpRingPort2 This object is the interface index of the ring port,which is
either a bridge port, or an aggregated link within a bridge,
on which ring is configured.
There can be only two ring p… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.5 |
| alaErpRingStatus An Integer value indicating the administrative state of the Ring.
enabled indicates that the Ring is to function normally, and
disabled that it is to cease function… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.6 |
| alaErpRingState The current state of the Ring. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.7 |
| alaErpRingGuardTimer Defines the guard timer value in centiseconds.
This timer is started to prevent the ring nodes from receiving
outdated R-APS messages.
It may be conf… | column | 10 milliseconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.9 |