alaErpRingVirtualChannel
ALCATEL-IND1-ERP-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.14
Object
column
r/w
Enumeration
A Integer value indicating whether the ring is operating with the Virtual channel enabled or not.
Context
- MIB
- ALCATEL-IND1-ERP-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- alaErpRingEntry
- Table
- alaErpRingTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaErpRingId Ring identifier that is unique in the bridge. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.1 |
| alaErpRingClearStats Defines per ring clear statistics control for ERP.
The value reset (1) indicates that ERP should clear all
statistics related to a ring in the system.By default,
this object conta… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.10 |
| alaErpRingLastStateChange The time (SysUpTime) at which the ethernet ring last
entered either the IDLE or PROTECTION state. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.11 |
| alaErpRingTimeToRevert Defines the time left to revert from Protection State to Idle State. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.12 |
| alaErpRingRowStatus The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.13 |
| alaErpRingRevertive A Integer value indicating whether the ring is operating with the
revertive mode enabled or not | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.15 |
| alaErpRingClearAction Defines clear action for ERP ring
The value reset(1) will give CLEAR action to ERP state machine | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.16 |
| alaErpRingActiveVersion This object indicates active ERP Ring protocol version. | column | Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.17 |
| alaErpRingResetVersionFallback Resets ERP running protocol | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.18 |
| alaErpRingServiceVid An integer indicating the VID of Service VLAN. All the ERP
control traffic will flow with Service VLAN tag across the
ring. This object must be specified while creating a row in
t… | column | Q-BRIDGE-MIBVlanId | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.2 |
| alaErpRingMEGLevel MEG level of the R-APS PDU to be inserted for this Ring.
This object must be specified while creating a row in
this table. Once the row has been created, the value of
this object… | column | AlaErpRingMEGLevel | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.3 |
| alaErpRingPort1 This object is the interface index of the ring port,which is
either a bridge port, or an aggregated link within a bridge,
on which ring is configured.
There can be only two ring p… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.4 |
| alaErpRingPort2 This object is the interface index of the ring port,which is
either a bridge port, or an aggregated link within a bridge,
on which ring is configured.
There can be only two ring p… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.5 |
| alaErpRingStatus An Integer value indicating the administrative state of the Ring.
enabled indicates that the Ring is to function normally, and
disabled that it is to cease function… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.6 |
| alaErpRingState The current state of the Ring. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.7 |
| alaErpRingWaitToRestoreTimer This object is valid only for RPL Node.
This timer is started to prevent frequent operation switch due
to an intermittent defect.
It may be configure… | column | Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.8 |
| alaErpRingGuardTimer Defines the guard timer value in centiseconds.
This timer is started to prevent the ring nodes from receiving
outdated R-APS messages.
It may be conf… | column | 10 milliseconds Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.9 |