alaErpRingGuardTimer

ALCATEL-IND1-ERP-MIB · .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.9

MIB view Table view

Object

column r/w 10 milliseconds Integer32

Defines the guard timer value in centiseconds.
              
This timer is started to prevent the ring nodes from receiving
outdated R-APS messages.
              
It may be configured by the operator in 10 ms steps between
10 ms to 2 seconds.

Context

MIB: ALCATEL-IND1-ERP-MIB
OID: .1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.9
Type: column
Access: readwrite
Status: current
Units: 10 milliseconds
Parent: alaErpRingEntry
Table: alaErpRingTable
Siblings: 17

Syntax

10 milliseconds Integer32

Values & Constraints

Object Constraints

range: 1-200

Related Objects

Sibling Objects

Object	Type	Syntax	OID
alaErpRingId Ring identifier that is unique in the bridge.	column	Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.1`
alaErpRingClearStats Defines per ring clear statistics control for ERP. The value reset (1) indicates that ERP should clear all statistics related to a ring in the system.By default, this object conta…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.10`
alaErpRingLastStateChange The time (SysUpTime) at which the ethernet ring last entered either the IDLE or PROTECTION state.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.11`
alaErpRingTimeToRevert Defines the time left to revert from Protection State to Idle State.	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.12`
alaErpRingRowStatus The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.13`
alaErpRingVirtualChannel A Integer value indicating whether the ring is operating with the Virtual channel enabled or not.	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.14`
alaErpRingRevertive A Integer value indicating whether the ring is operating with the revertive mode enabled or not	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.15`
alaErpRingClearAction Defines clear action for ERP ring The value reset(1) will give CLEAR action to ERP state machine	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.16`
alaErpRingActiveVersion This object indicates active ERP Ring protocol version.	column	Unsigned32	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.17`
alaErpRingResetVersionFallback Resets ERP running protocol	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.18`
alaErpRingServiceVid An integer indicating the VID of Service VLAN. All the ERP control traffic will flow with Service VLAN tag across the ring. This object must be specified while creating a row in t…	column	Q-BRIDGE-MIBVlanId	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.2`
alaErpRingMEGLevel MEG level of the R-APS PDU to be inserted for this Ring. This object must be specified while creating a row in this table. Once the row has been created, the value of this object…	column	AlaErpRingMEGLevel	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.3`
alaErpRingPort1 This object is the interface index of the ring port,which is either a bridge port, or an aggregated link within a bridge, on which ring is configured. There can be only two ring p…	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.4`
alaErpRingPort2 This object is the interface index of the ring port,which is either a bridge port, or an aggregated link within a bridge, on which ring is configured. There can be only two ring p…	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.5`
alaErpRingStatus An Integer value indicating the administrative state of the Ring. enabled indicates that the Ring is to function normally, and disabled that it is to cease function…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.6`
alaErpRingState The current state of the Ring.	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.7`
alaErpRingWaitToRestoreTimer This object is valid only for RPL Node. This timer is started to prevent frequent operation switch due to an intermittent defect. It may be configure…	column	Unsigned32	`.1.3.6.1.4.1.6486.800.1.2.1.46.1.1.2.1.1.8`