vStpInsPortRole

ALCATEL-ENT1-VLAN-STP-MIB · .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.13
MIB view Table view

Object

column Enumeration 
The port's role for this spanning tree
instance.

Context

MIB
ALCATEL-ENT1-VLAN-STP-MIB
OID
.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.13
Type
column
Access
readonly
Status
current
Parent
vStpInsPortEntry
Table
vStpInsPortTable
Siblings
24

Syntax

Enumeration

Values & Constraints

Enumerated Values
1root
2designated
3alternate
4backup
5disabled
6master

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
vStpInsPortNumber
The ifindex of the port for which this entry contains Spanning Tree Protocol management information.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.1
vStpInsPortDesignatedPtNumber
The Port Identifier of the port on the Designated Bridge for this port's segment (defined in IEEE 802.1D-1998: Section 8.5.5.7).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.10
vStpInsPortForwardTransitions
The number of times this port has transitioned from the Learning state to the Forwarding state.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.11
vStpInsPortManualMode
The port's manual mode for this spanning tree instance. This mode defines the way the state of the port(vStpPortState) is managed. The mode can be dynamic (1) (managed by the Span…
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.12
vStpInsPortPrimaryPortNumber
The ifindex of the associated primary port for this spanning tree instance. This information is only available if the port role is backup (vStpInsPortRole = 4)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.14
vStpInsPortAdminConnectionType
The administrative port's connection type for this spanning tree instance. This parameter is used to optimise the fast Spanning Tree (6.4.3 of P802.1w). The default value is nopoi…
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.15
vStpInsPortOperConnectionType
The operational port's connection type for this spanning tree instance.This parameter is used to optimise the fast Spanning Tree.
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.16
vStpInsPortCistRegionRootId
The bridge identifier of the regional CIST root bridge as determined by the Spanning Tree Protocol. This value is only used in flat mode
columnBRIDGE-MIBBridgeId.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.17
vStpInsPortCistPathCost
The cost of the path to the cist regional root. This value is only used in flat mode
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.18
vStpInsPortHelloTime
The value that is used by the port for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may…
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.19
vStpInsPortPriority
The priority of this port which was used originally as part of the port ID specified in 802.1D.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.2
vStpInsPortBridgeHelloTime
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may retu…
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.20
vstpInsPortRcvdInternal
The operational port's connection type for this spanning tree instance.This parameter is used to optimise the fast Spanning Tree.
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.21
vStpInsPortAdminEdge
Upon intiliazation of the port, this will be the default setting of the operational edge status of the port. May change depending on AutoEdge setting. Will not change status aft…
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.22
vStpInsPortAutoEdge
When enabled STP will determine the operational edge status of the port. May overwrite the AdminEdge status, if enabled. If disabled, port will remain as the AdminEdge state.
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.23
vStpInsPortRestrictedRole
When enabled, this port will not be selected as the Root port and will be selected as Alternate after the Root port is selected.
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.24
vStpInsPortRestrictedTcn
When set to enable, this port will not propogate any topology changes or notifications to other ports. Is used to prevent bridges outside of a core network from causing flushes wi…
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.25
vStpInsPortState
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. For ports which are disab…
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.3
vStpInsPortEnable
The enabled/disabled status of the port.
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.4
vStpInsPortPathCost
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.5
vStpInsPortDesignatedRoot
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
columnBRIDGE-MIBBridgeId.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.6
vStpInsPortDesignatedCost
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.7
vStpInsPortDesignatedBridge
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
columnBRIDGE-MIBBridgeId.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.8
vStpInsPortDesignatedPtPrio
The priority portion of the port ID on the Designated Bridge for this port's segment.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.9