vStpInsPortDesignatedPtNumber
ALCATEL-ENT1-VLAN-STP-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.10
Object
column
SNMPv2-SMIInteger32
The Port Identifier of the port on the Designated Bridge for this port's segment (defined in IEEE 802.1D-1998: Section 8.5.5.7).
Context
- MIB
- ALCATEL-ENT1-VLAN-STP-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vStpInsPortEntry
- Table
- vStpInsPortTable
- Siblings
- 24
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vStpInsPortNumber The ifindex of the port for which this
entry contains Spanning Tree Protocol management
information. | column | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.1 |
| vStpInsPortForwardTransitions The number of times this port has transitioned
from the Learning state to the Forwarding state. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.11 |
| vStpInsPortManualMode The port's manual mode for this spanning tree
instance. This mode defines the way the state
of the port(vStpPortState) is managed.
The mode can be dynamic (1) (managed by the Span… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.12 |
| vStpInsPortRole The port's role for this spanning tree
instance. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.13 |
| vStpInsPortPrimaryPortNumber The ifindex of the associated primary port
for this spanning tree instance. This information is
only available if the port role is backup
(vStpInsPortRole = 4) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.14 |
| vStpInsPortAdminConnectionType The administrative port's connection type for this
spanning tree instance. This parameter is used to
optimise the fast Spanning Tree (6.4.3 of P802.1w).
The default value is nopoi… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.15 |
| vStpInsPortOperConnectionType The operational port's connection type for this
spanning tree instance.This parameter is used to
optimise the fast Spanning Tree. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.16 |
| vStpInsPortCistRegionRootId The bridge identifier of the regional CIST root bridge as
determined by the Spanning Tree Protocol.
This value is only used in flat mode | column | BRIDGE-MIBBridgeId | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.17 |
| vStpInsPortCistPathCost The cost of the path to the cist regional root.
This value is only used in flat mode | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.18 |
| vStpInsPortHelloTime The value that is used by the port for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may… | column | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.19 |
| vStpInsPortPriority The priority of this port which was used originally as
part of the port ID specified in 802.1D. | column | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.2 |
| vStpInsPortBridgeHelloTime The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may retu… | column | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.20 |
| vstpInsPortRcvdInternal The operational port's connection type for this
spanning tree instance.This parameter is used to
optimise the fast Spanning Tree. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.21 |
| vStpInsPortAdminEdge Upon intiliazation of the port, this will be
the default setting of the operational edge
status of the port. May change depending on
AutoEdge setting. Will not change status aft… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.22 |
| vStpInsPortAutoEdge When enabled STP will determine the operational
edge status of the port. May overwrite the
AdminEdge status, if enabled. If disabled, port
will remain as the AdminEdge state. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.23 |
| vStpInsPortRestrictedRole When enabled, this port will not be selected as
the Root port and will be selected as Alternate
after the Root port is selected. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.24 |
| vStpInsPortRestrictedTcn When set to enable, this port will not propogate
any topology changes or notifications to other ports.
Is used to prevent bridges outside of a core network
from causing flushes wi… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.25 |
| vStpInsPortState The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. For ports which are disab… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.3 |
| vStpInsPortEnable The enabled/disabled status of the port. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.4 |
| vStpInsPortPathCost The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.5 |
| vStpInsPortDesignatedRoot The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached. | column | BRIDGE-MIBBridgeId | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.6 |
| vStpInsPortDesignatedCost The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.7 |
| vStpInsPortDesignatedBridge The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment. | column | BRIDGE-MIBBridgeId | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.8 |
| vStpInsPortDesignatedPtPrio The priority portion of the port ID on the Designated
Bridge for this port's segment. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.12.1.1.1.2.1.9 |