alaFipsConfigPriorityProtectionRemarkVal

ALCATEL-ENT1-FIPS-MIB · .1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.11
MIB view Table view

Object

scalar r/w Integer32 
When Fips priority protection is 'enabled' and configured as 'remark', this represents the remarked priority.
Valid priorities are 0 - 7; Lower numbers represent higher priority; -1 indicates that this object is not configured.

Context

MIB
ALCATEL-ENT1-FIPS-MIB
OID
.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.11
Type
scalar
Access
readwrite
Status
current
Parent
alaFipsInfo
Siblings
13

Syntax

Integer32

Values & Constraints

Object Constraints
range: -1-7

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alaFipsConfigFilterResourceLimit
Allowed maximum percentage of filter resources to be configured from the allocated FIPS resources.
scalarInteger32.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.1
alaFipsConfigPriorityProtectionAction
When Fips priority protection is enabled, the action on non-protected priorities can be 'drop' or 'remark'. Selecting 'drop', discards all frames with different priority and/or no…
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.10
alaFipsConfigHouseKeepingTimePeriod
This sets the time peroid (in seconds) for FIP Snooping house keeping activity.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.12
alaFipsConfigSWReinsertStatus
Fips FIP Snooping Software Reinsert Status ,With the Value set as Enable FIP Control Packet will be forwarded from software instead of hardware
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.13
alaFipsConfigSessClear
Clear sessions on FCoE ports; clear - ALL sessions / only NPIV sessions / only R-NPIV sessions / only E-TUNNEL sessions / FIPS sessions.
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.14
alaFipsConfigFIPSAdmin
Fips FIP Snooping Admin State, With the Value set as Enable FIP Snooping is enabled in the System
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.2
alaFipsConfigAddressMode
Fips Address Mode Supported on the Switch
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.3
alaFipsConfigPriorityOne
First fips lossless Priority
scalarInteger32.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.4
alaFipsConfigPriorityTwo
Second fips lossless Priority. Valid priorities are 0 - 7; Lower numbers represent higher priority; 1 indicates that this object is not configured.
scalarInteger32.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.5
alaFipsTotalNumFilterResource
Fips Total Num of Available Filter Resources
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.6
alaFipsUsedNumFilterResource
Fips Total Num of Used Filter Resources
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.7
alaFipsConfigStatsClear
Global Fips Statistics Clear Object, 0 is Default Value 1 is is Clear all the Fips Statistics in the VLAN as well as Port Level
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.8
alaFipsConfigPrioProtection
This enables/disables Fips priority protection globally, 'disable(0)' is Default Value.
scalarEnumeration.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.9