alaFipsConfigAddressMode
ALCATEL-ENT1-FIPS-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.3
Object
scalar
r/w
Enumeration
Fips Address Mode Supported on the Switch
Context
- MIB
- ALCATEL-ENT1-FIPS-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.3- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- alaFipsInfo
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | fpma |
2 | spma |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaFipsConfigFilterResourceLimit Allowed maximum percentage of filter resources to be configured from the allocated FIPS resources. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.1 |
| alaFipsConfigPriorityProtectionAction When Fips priority protection is enabled, the action on non-protected priorities can be 'drop' or 'remark'. Selecting 'drop', discards
all frames with different priority and/or no… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.10 |
| alaFipsConfigPriorityProtectionRemarkVal When Fips priority protection is 'enabled' and configured as 'remark', this represents the remarked priority.
Valid priorities are 0 - 7; Lower numbers represent higher priority; … | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.11 |
| alaFipsConfigHouseKeepingTimePeriod This sets the time peroid (in seconds) for FIP Snooping house keeping activity. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.12 |
| alaFipsConfigSWReinsertStatus Fips FIP Snooping Software Reinsert Status ,With the Value set as Enable FIP Control Packet will be forwarded from software instead of hardware | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.13 |
| alaFipsConfigSessClear Clear sessions on FCoE ports; clear - ALL sessions / only NPIV sessions / only R-NPIV sessions / only E-TUNNEL sessions / FIPS sessions. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.14 |
| alaFipsConfigFIPSAdmin Fips FIP Snooping Admin State, With the Value set as Enable FIP Snooping is enabled in the System | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.2 |
| alaFipsConfigPriorityOne First fips lossless Priority | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.4 |
| alaFipsConfigPriorityTwo Second fips lossless Priority. Valid priorities are 0 - 7; Lower numbers represent higher priority; 1 indicates that this object is not configured. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.5 |
| alaFipsTotalNumFilterResource Fips Total Num of Available Filter Resources | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.6 |
| alaFipsUsedNumFilterResource Fips Total Num of Used Filter Resources | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.7 |
| alaFipsConfigStatsClear Global Fips Statistics Clear Object, 0 is Default Value 1 is is Clear all the Fips Statistics in the VLAN as well as Port Level | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.8 |
| alaFipsConfigPrioProtection This enables/disables Fips priority protection globally, 'disable(0)' is Default Value. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.74.1.1.1.9 |