configFileMode
ALCATEL-ENT1-CONFIG-MGR-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.5
Object
scalar
r/w
Enumeration
The verbose mode displays all configuration commands and errors when the file is applied on the console screen. Ignored unless set from command line interface.
Context
- MIB
- ALCATEL-ENT1-CONFIG-MGR-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- configManager
- Siblings
- 107
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | verbose |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| configFileName The name of the configuration file to be
read by the device. The file specified
should be present on the device. | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.1 |
| configSnapshotFileName The name of the configuration snap-shot file
to be generated by the device. | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.10 |
| configSnapshotVCSPSelect A set of this object causes
VCSP configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.100 |
| configSnapshotDhcpSnoopingSelect A set of this object causes
DHCP SNOOPING configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.101 |
| configSnapshotAppMonSelect A set of this object causes
Application Monitoring configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.102 |
| configSnapshotLbdSelect A set of this object causes
Loopback Detection configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.103 |
| configSnapshotVMSnoopSelect A set of this object causes
VM Snooping configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.104 |
| configSnapshotPppoeIaSelect A set of this object causes
PPPoE-IA configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.105 |
| configSnapshotPmPortViolationSelect A set of this object causes
Port Violation configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.106 |
| configSnapshotLanPowerSelect A set of this object causes
Lan Power configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.107 |
| configSnapshotPVLANSelect A set of this object causes
Private VLAN(PVLAN) configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.108 |
| configSnapshotAction A set of this object causes the configuration
snap-shot to be generated by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.11 |
| configSnapshotAllSelect A set of this object causes
all application configuration data to be
included in the snap-shot file generated by
the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.12 |
| configSnapshotVlanSelect A set of this object causes
Vlan configuration data to be
included in the snap-shot file generated by
the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.13 |
| configSnapshotSpanningTreeSelect A set of this object causes
Spanning Tree configuration data to be
included in the snap-shot file generated by
the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.14 |
| configSnapshotQOSSelect A set of this object causes
QOS configuration data to be included
in the snap-shot file generated by the
the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.15 |
| configSnapshotIPSelect A set of this object causes
IP configuration data to be included
in the snap-shot file generated by the
the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.16 |
| configSnapshotIPXSelect A set of this object causes
IPX configuration data to be included
in the snap-shot file generated by the
the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.17 |
| configSnapshotIPMSSelect A set of this object causes
IPMS configuration data to be included
in the snap-shot file generated by the
the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.18 |
| configSnapshotAAASelect A set of this object causes
AAA configuration data to be included
in the snap-shot file generated by the
the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.19 |
| configFileAction Triggers application of the configuration
file specified by the configInputFileName.
A value of checkSyntax causes configInputFile
to be checked for syntax, with no changes to
dev… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.2 |
| configSnapshotSNMPSelect A set of this object causes
SNMP configuration data to be included
in the snap-shot file generated by the
the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.20 |
| configSnapshot8021QSelect A set of this object causes
802.1Q configuration data to be included
in the snap-shot file generated by the
the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.21 |
| configSnapshotLinkAggregateSelect A set of this object causes
link aggregation configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.22 |
| configSnapshotPortMirrorSelect A set of this object causes
port mirroring configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.23 |
| configSnapshotXIPSelect A set of this object causes
proprietary inter-switch protocol configuration
data to be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.24 |
| configSnapshotHealthMonitorSelect A set of this object causes
health monitoring configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.25 |
| configSnapshotBootPSelect A set of this object causes
bootp configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.26 |
| configSnapshotBridgeSelect A set of this object causes
source-learning configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.27 |
| configSnapshotChassisSelect A set of this object causes
the chassis configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.28 |
| configSnapshotInterfaceSelect A set of this object causes
ethernet interface configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.29 |
| configErrorFileName The name of the file containing the error
messages generated by the device during file
configuration. | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.3 |
| configSnapshotPolicySelect A set of this object causes
policy manager configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.30 |
| configSnapshotSessionSelect A set of this object causes
the user-session configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.31 |
| configSnapshotServerLoadBalanceSelect A set of this object causes
server load balancing configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.32 |
| configSnapshotSystemServiceSelect A set of this object causes
system services configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.33 |
| configSnapshotVRRPSelect A set of this object causes
VRRP configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.34 |
| configSnapshotWebSelect A set of this object causes
web manager configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.35 |
| configSnapshotRIPSelect A set of this object causes
RIP configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.36 |
| configSnapshotOSPFSelect A set of this object causes
OSPF configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.37 |
| configSnapshotBGPSelect A set of this object causes
BGP configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.38 |
| configSnapshotIPRMSelect A set of this object causes
IPRM routing configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.39 |
| configFileStatus Status of most recent application of configuration
file to the device. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.4 |
| configSnapshotIPMRSelect A set of this object causes
IP multicast routing configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.40 |
| configSnapshotModuleSelect A set of this object causes
module configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.41 |
| configTechSupportLogAction A set of this object causes
a tech_support.log file to be created
containing switch information useful to
a technical support group. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.42 |
| configWriteMemory A set of this object causes
the entire switch snap-shot configuration to
be stored in the boot.cfg file in the
current running directory. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.43 |
| configErrorFileMaximum The maximum number of error files which may be
present on a switch. Each time a new error file
is created, all but the newest configErrorFileMaxNum
error files are deleted. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.44 |
| configChangeStatus The current state of the running configuration with respect
to the saved configuration. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.45 |
| configSnapshotRDPSelect A set of this object causes
RDP configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.46 |
| configSnapshotIPv6Select A set of this object causes
IPv6 configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.47 |
| configSnapshotRIPngSelect A set of this object causes
RIPng configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.48 |
| configSnapshotAtmSelect A set of this object causes
ATM configuration data to
be included in the snap-shot file generated
by the device. NOT SUPPORTED. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.49 |
| configSnapshotSonetSelect A set of this object causes
Sonet configuration data to
be included in the snap-shot file generated
by the device. NOT SUPPORTED. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.50 |
| configSnapshotNTPSelect A set of this object causes
NTP configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.51 |
| configSnapshotPortMappingSelect A set of this object causes
Port Mapping configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.52 |
| configSnapshotOSPF3Select A set of this object causes
OSPF3 configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.53 |
| configWriteMemoryStatus Status of most recent wwrite memory action. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.54 |
| configSnapshotStackSelect A set of this object causes
STack Manager configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.55 |
| configSnapshotISISSelect A set of this object causes
ISIS configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.56 |
| configSnapshotEOAMSelect A set of this object causes
Ethernet OAM configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.57 |
| configSnapshotUDLDSelect A set of this object causes
UDLD configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.58 |
| configSnapshotNETSECSelect A set of this object causes
NETSEC configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.59 |
| configTimerFileName The name of the configuration file to be read later
by the device. | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.6 |
| configSnapshotIPsecSelect A set of this object causes
IP Security configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.60 |
| configSnapshotBFDSelect A set of this object causes
BFD configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.61 |
| configSnapshotMultiChassisSelect A set of this object causes
MCM configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.62 |
| configSnapshotErpSelect A set of this object causes
ERP configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.63 |
| configSnapshotMPLSSelect A set of this object causes
MPLS configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.64 |
| configSnapshotEFMOAMSelect A set of this object causes
EFMOAM configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.65 |
| configSnapshotCapabilitySelect A set of this object causes
capability manager configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.66 |
| configSnapshotVfcSelect A set of this object causes
VFC configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.67 |
| configSnapshotHaVlanSelect A set of this object causes
HA VLAN configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.68 |
| configSnapshotDaUnpSelect A set of this object causes
DA UNP configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.69 |
| configTimerFileTime The local time when the configuration file
will be read by the device. This object is
only set if the configInputFile must be applied
at a later time.
The following formats are va… | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.7 |
| configSnapshotDHLSelect A set of this object causes
DHL configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.70 |
| configSnapshotMVRPSelect A set of this object causes
MVRP configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.71 |
| configSnapshotSAASelect A set of this object causes
SAA configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.72 |
| configSnapshotSPBSelect A set of this object causes
SPB configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.73 |
| configSnapshotSPBIsisSelect A set of this object causes
SPB ISIS configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.74 |
| configSnapshotVirtualChassisSelect A set of this object causes VCM configuration
data to be included in the snap-shot file
generated by the device. A set of this object
is only valid in standalone mode | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.75 |
| configSnapshotMplsLdpSelect A set of this object causes
MPLS LDP configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.76 |
| configSnapshotVCMSpecific A set of this object causes
VCM configuration data for the chassis
specified by configSnapshotChassisId to
be included in the snap-shot file generated
by the device A set of thi… | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.77 |
| configSnapshotChassisId A set of this object in combination with
configSnapshotVCMSpecific causes
VCM configuration data for the specified
chassis to be included in the snap-shot
file generated by the de… | scalar | ALCATEL-ENT1-VIRTUAL-CHASSIS-MIBVirtualOperChassisId | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.78 |
| configSnapshotEvbSelect A set of this object causes
EVB configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.79 |
| configTimerFileStatus The current status of the ASCII configuration
timer. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.8 |
| configConvertConfiguration A set of this object to virtualChassis is only valid in
standalone mode and causes a virtual chassis snapshot to be
generated from the running configuration. The resulting
vcsetu… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.80 |
| configConvertConfigurationStatus Status of most recent convert configuration action. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.81 |
| configConvertDestinationDirectory The destination directory for the files created by the action
of setting the configConvertConfiguration object. | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.82 |
| configConvertReload A set of this object will initiate a reboot of the
switch as part of the configConvertConfiguration
action. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.83 |
| configSnapshotAppfpSelect A set of this object causes
Application Finger Print configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.84 |
| configSnapshotFipsSelect A set of this object causes
FIP Snooping configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.85 |
| configSnapshotLFPSelect A set of this object causes
LFP configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.86 |
| configSnapshotPmInterfaceSelect A set of this object causes
Port Manager Interfaceconfiguration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.87 |
| configSnapshotAutofabricSelect A set of this object causes
Autofabric configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.88 |
| configSnapshotDhcpv6RelaySelect A set of this object causes
DHCPv6 Relay configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.89 |
| configTimerClear A set of this object causes the ASCII
configuration timer to be cleared. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.9 |
| configSnapshotSIPSelect A set of this object causes
Autofabric configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.90 |
| configSnapshotOpenflowSelect A set of this object causes
Openflow configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.91 |
| configSnapshotWlanSelect A set of this object causes
Wlan configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.92 |
| configSnapshotDhcpSrvSelect A set of this object causes
DhcpSrv configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.93 |
| configSnapshotDPISelect A set of this object causes
Dpi configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.94 |
| configSnapshotMsgSrvSelect A set of this object causes
MsgSrv configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.95 |
| configSnapshotAlSrvSelect A set of this object causes
ActiveLeaseSrv configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.96 |
| configSnapshotDhcpv6SrvSelect A set of this object causes
Dhcp6Srv configuration data to
be included in the snap-shot file generated
by the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.97 |
| configSnapshotAGSelect A set of this object causes
AG configuration data to be included
in the snap-shot file generated by the
the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.98 |
| configSnapshotQMRSelect A set of this object causes
QMR configuration data to be included
in the snap-shot file generated by the
the device. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.99 |