alaBgpRestartStatus
ALCATEL-ENT1-BGP-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.37
Object
scalar
Enumeration
Indicates whether the router is currently performing a graceful restart.
Context
- MIB
- ALCATEL-ENT1-BGP-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.37- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- alaBgpGlobal
- Siblings
- 42
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notRestarting |
2 | inProgress |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaBgpProtoStatus The administrative status of BGP protocol. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.1 |
| alaBgpDampening Enable/Disable BGP route dampening | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.10 |
| alaBgpDampMaxFlapHistory The time in seconds the flap history of a route is retained. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.11 |
| alaBgpFastExternalFailOver Enable/Disable Resetting session immediately if a link to a
directly connected external peer is operationally down. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.12 |
| alaBgpPeerChanges Enable/Disable logging of peer state changes to the syslog. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.13 |
| alaBgpVersion The BGP Version in use. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.14 |
| alaBgpProtoOperState The BGP protocol operational state. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.15 |
| alaBgpMaxPeers Maximum number of BGP peers supported. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.16 |
| alaBgpNumActiveRoutes The number of active known routes in the BGP routing table | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.17 |
| alaBgpNumEstabExternalPeers The number of External Peers that are in ESTABLISHED state. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.18 |
| alaBgpNumEstabInternalPeers The number of Internal Peers that are in ESTABLISHED state. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.19 |
| alaBgpAutonomousSystemNumber The BGP Autonomous System (AS) Number. | scalar | INET-ADDRESS-MIBInetAutonomousSystemNumber | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.2 |
| alaBgpNumPaths The total number of paths known to the system. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.20 |
| alaBgpNumFeasiblePaths The total number of feasible paths known to the system. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.21 |
| alaBgpNumDampenedPaths The total number of dampened paths known to the system. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.22 |
| alaBgpNumIgpSyncWaitPaths The total number of paths learnt from internal peers that are
waiting to be synchronized with IGP. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.23 |
| alaBgpNumPolicyChgPaths The total number of paths that are currently rejected but stored
anticipating an inbound policy change for an external peer which
is configured to accept dynamic policy changes. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.24 |
| alaBgpMultiPath Enable/Disable Equal-Cost MultiPaths | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.25 |
| alaBgpRouteReflection Enable/Disable Route reflection | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.26 |
| alaBgpClusterId The local cluster id of this route reflection cluster. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.27 |
| alaBgpDampeningClear Writing a value of clear into this variable will clear the
dampening history. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.28 |
| alaBgpDampCutOff When a route's figure of merit reaches this value, the route
is considered damped. This is a floating point value with 2 digit
precision. For example, a value of 3.5 is encoded … | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.29 |
| alaBgpRouterId The configured BGP router ID. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.3 |
| alaBgpDampReuse When a route's figure of merit decays to this value, the route
can be reused. This is a floating point value with 2 digit precision.
For example, a value of 3.5 is encoded as 350… | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.30 |
| alaBgpDampCeil The maximum value that the figure of merit of a route can attain.
This is a floating point value with 2 digit precision. For example,
a value of 3.5 is encoded as 350, a value of… | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.31 |
| alaBgpAspathCompare Specifies whether to include aspath comparison in route selection. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.32 |
| alaBgpAsOriginInterval The minimum interval in seconds between successive updates
advertising the networks belonging to the local autonomous system. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.33 |
| alaBgpDampHalfLife The time in seconds in which the penalty to a flapping route
decreases to half its initial value. | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.34 |
| alaBgpGracefulRestart Enables BGP graceful restart capability. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.35 |
| alaBgpRestartInterval Determines how long, in seconds, peering BGP routers are told to wait for this router
to complete graceful restart and re-establish peering session. It is recommended
that this va… | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.36 |
| alaBgpMultiProtocolIpv4 Indicates whether IPv4 BGP4 capability is enabled. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.38 |
| alaBgpMultiProtocolIpv6 Indicates whether IPv6 BGP4 capability is enabled. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.39 |
| alaBgpIgpSynchStatus Enable/Disable IGP Synchronization for learned BGP prefixes. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.4 |
| alaBgpBfdStatus Enables/Disables interaction with BFD module for BGP protocol. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.40 |
| alaBgpBfdAllNeighborStatus Enables/Disables reachability detection using BFD for all BGP Neighbors. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.41 |
| alaBgpAsnFormat Configures the display format to be used when displaying
4-octet Autonomous System Numbers. This configuration will
change only the output format. The input format can still
be… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.42 |
| alaBgpClearAllNeighborStats Setting a value of clear into this variable will clear the
per peer statistics for all peers. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.43 |
| alaBgpMedAlways Enable/Disable BGP Metric MULTI_EXIT_DISC comparison between
routes from different Autonomous Systems. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.5 |
| alaBgpDefaultLocalPref The default LOCAL_PREF to be applied to routes learnt from
neighbouring autonomous system. | scalar | Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.6 |
| alaBgpMissingMed Specifies how to a missing med in a path attribute. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.7 |
| alaBgpManualTag Manual tag to be used for learned BGP routes. A value of 0 means no manual tagging. | scalar | Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.8 |
| alaBgpConfedId Confederation identifier. A value of 0 means this local speaker
is not a member of any confederation | scalar | INET-ADDRESS-MIBInetAutonomousSystemNumber | .1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.9 |