alaAutoFabricGlobalDiscovery
ALCATEL-ENT1-AUTO-FABRIC-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.75.1.1.2
Object
scalar
r/w
Enumeration
Defines the global discovery window control for Autofabric. The value restart (2) indicates that Autofabric should restart global discovery window. By default, this object contains a zero value.
Context
- MIB
- ALCATEL-ENT1-AUTO-FABRIC-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.75.1.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- alcatelIND1AUTOFABRICMIBObjects
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | default |
2 | restart |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaAutoFabricGlobalStatus This variable is used to enable or diable Autofabric on the switch.
The value enable (1) indicates that Autofabric should be enabled on
the switch. The value disable (2) is used t… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.1 |
| alaAutoFabricRemoveGlobalConfig deprecated This variable is used to remove the auto fabric global configuration when the user chooses to disable auto fabric | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.10 |
| alaAutoFabricGlobalOSPFv2ProtocolStatus This variable is used to enable or disable auto configuration on the
OSPFv2 IP Protocol on the switch. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.11 |
| alaAutoFabricGlobalOSPFv3ProtocolStatus This variable is used to enable or disable auto configuration on the
OSPFv3 IP Protocol on the switch. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.12 |
| alaAutoFabricGlobalISISProtocolStatus This variable is used to enable or disable auto configuration on the
ISIS IP Protocol on the switch. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.13 |
| alaAutoFabricSPBDefaultProfile This object specifies the default SAP profile used in the Omni switch.
singleService: defines single service SAP profiles.
autoVlan: AOS will generate SAP bindings for … | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.14 |
| alaAutoFabricLBDProtocolStatus This variable is used to enable or disable AutoFabric LBD on SAP port
on the switch. The value enable (1) indicates that during discovery
the switch will enable Loopback detection… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.15 |
| alaAutoFabricTrapsObj | node | - | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.16 |
| alaAutoFabricRemoveVCReload This variable is applicable only for Standalone configuration.
It reloads the unit as a Standalone when the user chooses to disable auto fabric. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.17 |
| alaAutoFabricGlobalLACPProtocolStatus This variable is used to enable or diable AutoFabric LACP discovery.
on the switch. The value enable (1) indicates that during discovery
the switch will attempt to create LACP lin… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.3 |
| alaAutoFabricGlobalSPBProtocolStatus This variable is used to enable or diable AutoFabric SPB discovery.
on the switch. The value enable (1) indicates that during discovery
the switch will attempt to create SPB adjac… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.4 |
| alaAutoFabricGlobalMVRPProtocolStatus This variable is used to enable or diable AutoFabric MVRP discovery.
on the switch. The value enable (1) indicates that during discovery
the switch will enable MVRP and attempt to… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.5 |
| alaAutoFabricGlobalConfigSaveTimer Maximum period of time after which configuration built up by AutoFabric
would get written to the boot.cfg or vcboot.cfg.
The range supported is 60-3600 seconds. | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.6 |
| alaAutoFabricGlobalConfigSaveTimerStatus This variable is used to enable or diable AutoFabric config save
timer on the switch. The value enable (1) indicates that
after the expiry of the config save timer, all AutoFabri… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.7 |
| alaAutoFabricGlobalDiscoveryTimer This variable is used to specify auto-fabric auto
discovery interval, zero disables it, configurable
Value is from 2 to 3600 minutes. | scalar | Minutes Unsigned32 | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.8 |
| alaAutoFabricPortConfig | node | - | .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9 |