alarmClearEntry
ALARM-MIB ·
.1.3.6.1.2.1.118.1.3.2.1
Object
row
Information on a cleared alarm.
Context
- MIB
- ALARM-MIB
- OID
.1.3.6.1.2.1.118.1.3.2.1- Type
- row
- Status
- current
- Parent
- alarmClearTable
- Table
- alarmClearTable
- Children
- 10
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alarmClearIndex An integer which acts as the index of entries within
the named alarm list. It wraps back to 1 after it
reaches its maximum value.
This object has th… | column | Unsigned32 | .1.3.6.1.2.1.118.1.3.2.1.1 |
| alarmClearModelPointer A pointer to the corresponding row in the
alarmModelTable for this cleared alarm. | column | SNMPv2-TCRowPointer | .1.3.6.1.2.1.118.1.3.2.1.10 |
| alarmClearDateAndTime The local date and time when the alarm cleared.
This object facilitates retrieving all instances of
alarms that have been cleared since a given point in time.
… | column | SNMPv2-TCDateAndTime | .1.3.6.1.2.1.118.1.3.2.1.2 |
| alarmClearEngineID The identification of the SNMP engine at which the alarm
originated. If the alarm is from an SNMPv1 system this
object is a zero length string. | column | LocalSnmpEngineOrZeroLenStr | .1.3.6.1.2.1.118.1.3.2.1.3 |
| alarmClearEngineAddressType This object indicates what type of address is stored in
the alarmActiveEngineAddress object - IPv4, IPv6, DNS, etc. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.118.1.3.2.1.4 |
| alarmClearEngineAddress The Address of the SNMP engine on which the alarm was
occurring. This is used to identify the source of an SNMPv1
trap, since an alarmActiveEngineId cannot be extr… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.118.1.3.2.1.5 |
| alarmClearContextName The name of the SNMP MIB context from which the alarm came.
For SNMPv1 traps this is the community string from the Trap.
Note that care needs to be taken when selecting community
… | column | OctetString | .1.3.6.1.2.1.118.1.3.2.1.6 |
| alarmClearNotificationID The NOTIFICATION-TYPE object identifier of the alarm
clear. | column | ObjectIdentifier | .1.3.6.1.2.1.118.1.3.2.1.7 |
| alarmClearResourceId This object identifies the resource that was under alarm.
If there is no corresponding resource, then
the value of this object MUST be 0.0. | column | ResourceId | .1.3.6.1.2.1.118.1.3.2.1.8 |
| alarmClearLogIndex This number MUST be the same as the log index of the
applicable row in the notification log MIB, if it exists.
If no log index applies to the trap, then this object
MUST have the … | column | Unsigned32 | .1.3.6.1.2.1.118.1.3.2.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| alarmListName The name of the list of alarms. This SHOULD be the same as
nlmLogName if the Notification Log MIB [RFC3014] is supported.
This SHOULD be the same as, or contain as a prefix, the
… | column | OctetString | .1.3.6.1.2.1.118.1.2.2.1.1 |
| alarmClearDateAndTime The local date and time when the alarm cleared.
This object facilitates retrieving all instances of
alarms that have been cleared since a given point in time.
… | column | SNMPv2-TCDateAndTime | .1.3.6.1.2.1.118.1.3.2.1.2 |
| alarmClearIndex An integer which acts as the index of entries within
the named alarm list. It wraps back to 1 after it
reaches its maximum value.
This object has th… | column | Unsigned32 | .1.3.6.1.2.1.118.1.3.2.1.1 |