alarmActiveVariableEntry
ALARM-MIB ·
.1.3.6.1.2.1.118.1.2.3.1
Object
row
Entries appear in this table when there are variables in
the varbind list of a corresponding alarm in
alarmActiveTable.
Entries appear in this table as though
the trap/notification had been transported using a
SNMPv2-Trap-PDU, as defined in [RFC3416] - i.e., the
alarmActiveVariableIndex 1 will always be sysUpTime
and alarmActiveVariableIndex 2 will always be
snmpTrapOID.
If the incoming notification is instead an SNMPv1 Trap-PDU and
the value of alarmModelVarbindIndex is 1 or 2, an appropriate
value for sysUpTime.0 or snmpTrapOID.0 shall be determined
by using the rules in section 3.1 of [RFC3584].
Context
- MIB
- ALARM-MIB
- OID
.1.3.6.1.2.1.118.1.2.3.1- Type
- row
- Status
- current
- Parent
- alarmActiveVariableTable
- Table
- alarmActiveVariableTable
- Children
- 12
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alarmActiveVariableIndex A strictly monotonically increasing integer, starting at
1 for a given alarmActiveIndex, for indexing variables
within the active alarm variable list. | column | Unsigned32 | .1.3.6.1.2.1.118.1.2.3.1.1 |
| alarmActiveVariableOidVal The value when alarmActiveVariableType is 'objectId'. | column | ObjectIdentifier | .1.3.6.1.2.1.118.1.2.3.1.10 |
| alarmActiveVariableCounter64Val The value when alarmActiveVariableType is 'counter64'. | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.118.1.2.3.1.11 |
| alarmActiveVariableOpaqueVal The value when alarmActiveVariableType is 'opaque'.
Note that although RFC2578 [RFC2578] forbids the use
of Opaque in 'standard' MIB modules, this particular
usage … | column | OctetString | .1.3.6.1.2.1.118.1.2.3.1.12 |
| alarmActiveVariableID The alarm variable's object identifier. | column | ObjectIdentifier | .1.3.6.1.2.1.118.1.2.3.1.2 |
| alarmActiveVariableValueType The type of the value. One and only one of the value
objects that follow is used for a given row in this table,
based on this type. | column | Enumeration | .1.3.6.1.2.1.118.1.2.3.1.3 |
| alarmActiveVariableCounter32Val The value when alarmActiveVariableType is 'counter32'. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.118.1.2.3.1.4 |
| alarmActiveVariableUnsigned32Val The value when alarmActiveVariableType is 'unsigned32'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.118.1.2.3.1.5 |
| alarmActiveVariableTimeTicksVal The value when alarmActiveVariableType is 'timeTicks'. | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.118.1.2.3.1.6 |
| alarmActiveVariableInteger32Val The value when alarmActiveVariableType is 'integer32'. | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.118.1.2.3.1.7 |
| alarmActiveVariableOctetStringVal The value when alarmActiveVariableType is 'octetString'. | column | OctetString | .1.3.6.1.2.1.118.1.2.3.1.8 |
| alarmActiveVariableIpAddressVal The value when alarmActiveVariableType is 'ipAddress'. | column | SNMPv2-SMIIpAddress | .1.3.6.1.2.1.118.1.2.3.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| alarmListName The name of the list of alarms. This SHOULD be the same as
nlmLogName if the Notification Log MIB [RFC3014] is supported.
This SHOULD be the same as, or contain as a prefix, the
… | column | OctetString | .1.3.6.1.2.1.118.1.2.2.1.1 |
| alarmActiveIndex A strictly monotonically increasing integer which
acts as the index of entries within the named alarm
list. It wraps back to 1 after it reaches its
maximum value. | column | Unsigned32 | .1.3.6.1.2.1.118.1.2.2.1.3 |
| alarmActiveVariableIndex A strictly monotonically increasing integer, starting at
1 for a given alarmActiveIndex, for indexing variables
within the active alarm variable list. | column | Unsigned32 | .1.3.6.1.2.1.118.1.2.3.1.1 |