adGenGponOntPortMapBridgeGroupIfIndex

ADTRAN-GENGPON-MIB · .1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.29
Commands MIB view Table view

Object

column r/w IF-MIBInterfaceIndexOrZero 
This is the ifIndex of a BridgeGroup of which this physical Ethernet ONT port is a member.
If zero, port is not member of any BridgeGroup.
    For a SET operation to be accepted on this OID, the following must be true:
       - In the GPON extended ifIndex, the ONT and PON must be the same values
         for the BridgeGroup as those for the physical port.
       - The virtual slot type included in the extended ifIndex must match the
         definition of bridgeGroup(11) defined in the adGenGponOntPortType.
    A  SET to this object is supported only for physical Ethernet ports.
    Setting this oid to zero would remove port from the bridge group.

Context

MIB
ADTRAN-GENGPON-MIB
OID
.1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.29
Type
column
Access
readwrite
Status
current
Parent
adGenGponOntPortProvEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENGPON-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENGPON-MIB::adGenGponOntPortMapBridgeGroupIfIndex'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'ADTRAN-GENGPON-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENGPON-MIB::adGenGponOntPortMapBridgeGroupIfIndex.<ifIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'ADTRAN-GENGPON-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ADTRAN-GENGPON-MIB::adGenGponOntPortMapBridgeGroupIfIndex'

Syntax

IF-MIBInterfaceIndexOrZero
Source
IF-MIBInterfaceIndexOrZero
Base type
Integer32
Display format
d
Type Description
This textual convention is an extension of the
InterfaceIndex convention.  The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system.  This extension permits the
additional value of zero.  the value zero is object-specific
and must therefore be defined as part of the description of
any object which uses this syntax.  Examples of the usage of
zero might include situations where interface was unknown,
or when none or all interfaces need to be referenced.

Values & Constraints

Type Constraints
range: 0..2147483647