h3cRrppRingPrimaryPort
A3COM-HUAWEI-RRPP-MIB ·
.1.3.6.1.4.1.43.45.1.10.2.45.2.2.1.6
Object
If the switch is a master-node or transit-node, this value is the primary port ifIndex; otherwise, if the switch is a edge-node or assistant-edge-node, this value is the common port ifIndex. This value can't be modified after created.
Context
- MIB
- A3COM-HUAWEI-RRPP-MIB
- OID
.1.3.6.1.4.1.43.45.1.10.2.45.2.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cRrppRingEntry
- Table
- h3cRrppRingTable
- Siblings
- 8
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cRrppRingID An index uniquely identifies a RRPP Ring,
which ranges from 1~64.
This value can't be modified after created. | column | Integer32 | .1.3.6.1.4.1.43.45.1.10.2.45.2.2.1.1 |
| h3cRrppRingEnableStatus Indicating whether the RRPP is enabled on this Ring.
NOTE: If major-ring and sub-ring(s) of a domain
coexist on a switch, major-ring must be enabled
before sub-ring is enabled. A… | column | EnabledStatus | .1.3.6.1.4.1.43.45.1.10.2.45.2.2.1.2 |
| h3cRrppRingActive As both h3cRrppEnableStatus and h3cRrppRingEnableStatus
are enabled, the ring is activated. Whereas either of
the two items is disabled, the ring is inactive. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.45.2.2.1.3 |
| h3cRrppRingState The status (i.e. unknown, health or fault) of the Ethernet
ring.
This is valid only on the master-node. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.45.2.2.1.4 |
| h3cRrppRingNodeMode There are four RRPP node modes for the switch on a RRPP
ring, such as master, transit, edge and assistant-edge.
Each RRPP ring has a single designated master-node. All
other node… | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.45.2.2.1.5 |
| h3cRrppRingSecondaryPort If the switch is a master-node or transit-node, this value
is the secondary port ifIndex; otherwise, if the switch is
an edge-node or assistant-edge-node, this value is the edge
p… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.45.2.2.1.7 |
| h3cRrppRingLevel Level of a ring. This field should be set 1 on major-ring
and 2 on the sub-ring.
This value can't be modified after created. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.45.2.2.1.8 |
| h3cRrppRingRowStatus This object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.
To create a new row, h3cRrp… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.43.45.1.10.2.45.2.2.1.9 |