hwRedirectTargetVlanID
A3COM-HUAWEI-LswQos-MIB ·
.1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.22
Object
column
r/w
Integer32
The destination vlan ID for PBR. Default value is 0. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary when no nexthop is set.
Context
- MIB
- A3COM-HUAWEI-LswQos-MIB
- OID
.1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwRedirectEntry
- Table
- hwRedirectTable
- Siblings
- 24
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwRedirectAclIndex Index of acl rule. | column | Integer32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.1 |
| hwRedirectLinkAclRule The subitem of the link acl. | column | Integer32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.10 |
| hwRedirectToCpu Redirect to cpu. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.11 |
| hwRedirectToIfIndex The ifIndex of port to be redirect to. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.12 |
| hwRedirectToNextHop1 | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.13 |
| hwRedirectToNextHop2 | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.14 |
| hwRedirectRuntime Is run or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.15 |
| hwRedirectRowStatus RowStatus, now support three status: createAndGo, active, destroy. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.16 |
| hwRedirectToSlotNo The slot number to process redirection. Default value is 15.
When L3plus function is not supported, the default value would be set.
For L3plus redirection function, it is necessar… | column | Integer32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.17 |
| hwRedirectRemarkedDSCP DSCP of Policy-Based Routing. When L3plus function is not supported,
the default value would be set.
For L3plus redirection function, it is optional. | column | Integer32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.18 |
| hwRedirectRemarkedPri The priority of the redirect packet. When L3plus function is not supported,
the default value would be set.
For L3plus redirection function, it is optional. | column | Integer32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.19 |
| hwRedirectIfIndex ifIndex of port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.2 |
| hwRedirectRemarkedTos The TOS of the redirect packet.
When L3plus function is not supported, the default value would be set.
For L3plus redirection function, it is optional. | column | Integer32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.20 |
| hwRedirectToNextHop3 The third IP address for PBR. Default value is 0xffffffff.
When L3plus function is not supported, the default value would be set.
The data stream can be redirected to three nextho… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.21 |
| hwRedirectMode The node denotes the strategy adopted by the PBR.
If strict-priority is configured, the most preferential IP address
is use as redirected nexthop.
If the mode is load-balance, any… | column | Enumeration | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.23 |
| hwRedirectToNestedVlanID The nested vlan ID inserted before the original vlan tag. Default value is 0.
When the function is not supported, the default value would be set.
It is optional. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.24 |
| hwRedirectToModifiedVlanID The new vlan ID replaced the old one. Default value is 0.
When the function is not supported, the default value would be set.
It is optional. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.25 |
| hwRedirectVlanID Vlan ID. | column | Integer32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.3 |
| hwRedirectDirection Direction of data stream. | column | Enumeration | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.4 |
| hwRedirectUserAclNum The number of the user acl. | column | Integer32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.5 |
| hwRedirectUserAclRule The subitem of the user acl. | column | Integer32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.6 |
| hwRedirectIpAclNum The num of the IP acl. | column | Integer32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.7 |
| hwRedirectIpAclRule The subitem of the IP acl. | column | Integer32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.8 |
| hwRedirectLinkAclNum The num of the link acl. | column | Integer32 | .1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.9 |