h3cEponDeviceSampleMinimum
A3COM-HUAWEI-EPON-DEVICE-MIB ·
.1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.1
Object
column
r/w
seconds Integer32
The minimum Frequency of events this system will accept. A system may use the larger values of this minimum to lessen the impact of constant sampling. For larger sampling intervals the system samples less often and suffers less overhead. Unless explicitly resource limited, a system's value for this object SHOULD be 1, allowing as small as a 1 second interval for ongoing trigger sampling. Writing of the value can be done all the time.
Context
- MIB
- A3COM-HUAWEI-EPON-DEVICE-MIB
- OID
.1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- h3cEponDeviceEventObjectEntry
- Table
- h3cEponDeviceEventObjectTable
- Siblings
- 23
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 1-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cEponDevicePowerVoltageEventIndicationState A read-only variable, which defines the state of the
Power/Voltage Event Indication of an EPON device. When
condition of box Power/voltage is above the threshold
defined the alarm… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.10 |
| h3cEponDevicePowerVoltageEventIndicationEnabled A control to allow PowerVoltageEventIndication event to
be used. When the value is true the event is sampled.
When the value is false the event is not sampled.
Writing can be done… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.11 |
| h3cEponDeviceGlobalEventState A read-only variable, which defines the state of the
Global Event indication of an EPON device. When the
indication of the event input occurs the event is
asserted. When the input… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.12 |
| h3cEponDeviceGlobalEventEnabled A control to allow GlobalEvent event to be used. When
the value is true the event is sampled. When the value
is false the event is not sampled. Writing can be done
all the time. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.13 |
| h3cEponDeviceErroredSymbolPeriodEventState A read-only variable, which defines the state of the
Errored Symbol Period Event indication of the OAM alarm
TLV indications as described in the [802.3ah]
clause 57.5.3. When true… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.14 |
| h3cEponDeviceErroredSymbolPeriodEventEnabled A control to allow ErroredSymbolPeriodEvent event to be
used. When the value is true the event is sampled. When
the value is false the event is not sampled. Writing can
be done al… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.15 |
| h3cEponDeviceErroredFrameEventState A read-only variable, which defines the state of the
Errored Frame Event indication of the OAM alarm TLV
indications as described in the [802.3ah] clause 57.5.3.
When true the dev… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.16 |
| h3cEponDeviceErroredFrameEventEnabled A control to allow ErroredFrameEvent event to be used.
When the value is true the event is sampled. When the
value is false the event is not sampled.
Writing can be done all the t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.17 |
| h3cEponDeviceErroredFramePeriodEventState A read-only variable, which defines the state of the
Errored Frame Period Event indication of the OAM alarm
TLV indications as described in the [802.3ah] clause
57.5.3. When true … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.18 |
| h3cEponDeviceErroredFramePeriodEventEnabled A control to allow ErroredFramePeriodEvent event to be
used. When the value is true the event is sampled. When
the value is false the event is not sampled. Writing can
be done all… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.19 |
| h3cEponDeviceDyingGaspAlarmState A read-only variable, which defines the state of the
Dying Gasp indication of the OAM alarm indications as
described in the [802.3ah] clause 57. When true the
device has a dying g… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.2 |
| h3cEponDeviceErroredFrameSecondsSummaryEventState A read-only variable, which defines the state of the
Errored Frame Seconds Summary Event indication of the
OAM alarm TLV indications as described in the [802.3ah]
clause 57.5.3. W… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.20 |
| h3cEponDeviceErroredFrameSecondsSummaryEventEnabled A control to allow ErroredFrameSecondsSummaryEvent event
to be used. When the value is true the event is sampled.
When the value is false the event is not sampled.
Writing can be … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.21 |
| h3cEponDeviceOrganizationSpecificEventState A read-only variable, which defines the state of the
Organization Specific Event indication of the OAM alarm
TLV indications as described in the [802.3ah] clause
57.5.3. When true… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.22 |
| h3cEponDeviceOrganizationSpecificEventEnabled A control to allow OrganizationSpecificEvent event to be
used. When the value is true the event is sampled. When
the value is false the event is not sampled.
Writing can be done a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.23 |
| h3cEponDeviceEventControl Indicates and controls the resetting of the Event log.
Setting this object to none(1) has no action resetLog(2)
empties the event log. All data is deleted. Setting it
to useDefaul… | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.24 |
| h3cEponDeviceDyingGaspAlarmEnabled A control to allow DyingGaspAlarm event to be used.
When the value is true the event is sampled. When the
value is false the event is not sampled.
Writing can be done all the time. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.3 |
| h3cEponDeviceCriticalEventState A read-only variable, which defines the state of the
Critical Event indication of the OAM alarm indications
as described in the [802.3ah] clause 57. When true the
device has a Cri… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.4 |
| h3cEponDeviceCriticalEventEnabled A control to allow CriticalEvent event to be used. When
the value is true the event is sampled. When the value
is false the event is not sampled.
Writing can be done all the time. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.5 |
| h3cEponDeviceLocalLinkFaultAlarmState A read-only variable, which defines the state of the
Local Link Fault indication of the OAM alarm indications
as described in the [802.3ah] clause 57. When true the
device has a L… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.6 |
| h3cEponDeviceLocalLinkFaultAlarmEnabled A control to allow LocalLinkFaultAlarm event to be used.
When the value is true the event is sampled. When the
value is false the event is not sampled.
Writing can be done all the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.7 |
| h3cEponDeviceTemperatureEventIndicationState A read-only variable, which defines the state of the
Temperature Event indication of an EPON device. When
condition of box temperature is above the threshold
defined the alarm is … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.8 |
| h3cEponDeviceTemperatureEventIndicationEnabled A control to allow TemperatureEventIndication event to
be used. When the value is true the event is sampled.
When the value is false the event is not sampled.
Writing can be done … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.9 |