h3cEponDeviceObjectReportThreshold
A3COM-HUAWEI-EPON-DEVICE-MIB ·
.1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.9
Object
A set of 8 integers, for each LLID, that defines the threshold reporting for each Queue in the REPORT message, as defined in [802.3ah] 64. First Queue set reporting will provide information on the queue occupancy of frames below this Threshold. The value returned shall be in Time quanta (TQ) which is 16nsec or 2 octets increments. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
Context
- MIB
- A3COM-HUAWEI-EPON-DEVICE-MIB
- OID
.1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Units
- TQ (16nsec)
- Parent
- h3cEponDeviceControlEntry
- Table
- h3cEponDeviceControlTable
- Siblings
- 8
Syntax
TQ (16nsec) SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cEponDeviceObjectReset This variable is used to reset the EPON device. The
interface may be unavailable while the reset occurs and
data may be lost. During reading operation it returns
the state of the … | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.1 |
| h3cEponDeviceRemoteMACAddressLLIDControl Indicates and controls the resetting of the LLID MAC
address log. Setting this object to none(1) has no
action resetLog(2) empties the LLID MAC address log. All
data is deleted. S… | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.10 |
| h3cEponDeviceObjectModes This variable defines the mode of the EPON device. When
an olt(1) it is an Optical Line Terminal device (server)
and when an onu(2) and Optical Network Unit device
(client) | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.2 |
| h3cEponDeviceObjectFecEnabled This variable defines and provides information whether the
EPON device uses FEC as defined in the [802.3ah] clause
65.2 for EPON. When noFECEnabled(1) the device does not
support … | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.4 |
| h3cEponDeviceObjectOamMode This variable defines and provides information on the
Operation Administration and Maintenance (OAM) mode of
an EPON device as defined by the [802.3ah] clause 57.
When noOam(1) th… | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.5 |
| h3cEponDeviceObjectDeviceReadyMode This variable defines the mode of an EPON device and
provides information on the mode in initialization -
ready for registration as defined by the [802.3ah]
clause 64.
When notRea… | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.6 |
| h3cEponDeviceObjectPowerDown Setting this variable to True(1) will cause Device to be
entered into Power down mode where no registration is
allowed and only receiving data from the link.
Writing can be done a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.7 |
| h3cEponDeviceObjectNumberOfLLIDs A read only variable which defines the number of
registered LLIDs (as defined by the [802.3ah] clause 65)
in a EPON network for an OLT and an ONU. Initialization
value is 0.
This … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.8 |