h3cDot3MpcpAdminState
A3COM-HUAWEI-DOT3-EFM-EPON-MIB ·
.1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.11
Object
This variable can be used to define the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. Selecting admin for an interface with Multi-Point MAC Control sublayer. When selecting the value as True the interface Multi-Point control protocol is enabled. When selecting the value as False the interface acts as if the Multi-point Control protocol does not exist. Reading reflects the state of the attribute and the operation of the Multi-point control protocol mode of the interface. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
Context
- MIB
- A3COM-HUAWEI-DOT3-EFM-EPON-MIB
- OID
.1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cDot3MpcpEntry
- Table
- h3cDot3MpcpTable
- Siblings
- 13
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDot3MpcpID This variable is assigned so as to uniquely identify the
Multi-Point MAC Control (MPCP) entity, as defined in
[802.3ah] clause 64, among the subordinate managed
objects of the co… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.1 |
| h3cDot3MpcpMaximumPendingGrants A read-only value that indicates the maximum number of
grants an ONU can store. The maximum number of grants an
ONU can store has a range of 0 to 255.
This attribute is relevant f… | column | Integer32 | .1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.10 |
| h3cDot3MpcpOnTime A read-only value that reports the -on time- for a grant
burst in increments of Time Quanta (TQ) 16ns as defined
in [802.3ah] 60,64. The value returned shall be (on time
ns)/16. I… | column | TQ (16nsec) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.12 |
| h3cDot3MpcpOffTime A read-only value that reports the -off time- for a
grant burst in increments of Time Quanta (TQ) 16ns as
defined in [802.3ah] 60,64. The value returned shall be
(off time ns)/16.… | column | TQ (16nsec) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.13 |
| h3cDot3MpcpSyncTime A read-only value that reports the -sync lock time- for
an OLT receiver in increments of Time Quanta (TQ) 16ns
as defined in [802.3ah] 60,64,65. The value returned
shall be (sync … | column | TQ (16nsec) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.14 |
| h3cDot3MpcpOperStatus This variable can be used to define the operational
state of the Multi-Point MAC Control sublayer as
defined in [802.3ah] clause 64. Selecting admin for an
interface with Multi-Po… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.2 |
| h3cDot3MpcpMode This variable can be used to identify the operational
state of the Multi-Point MAC Control sublayer as
defined in [802.3ah] clause 64. Selecting olt(1) for an
OLT (server) mode an… | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.3 |
| h3cDot3MpcpLinkID A read-only value that identifies the Logical Link
identity (LLID) associated with the MAC port as
specified in [802.3ah] clause 65.1.3.2.2.
This attribute is relevant for an OLT … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.4 |
| h3cDot3MpcpRemoteMACAddress A read-only value that identifies the source_address
parameter of the last MPCPDUs passed to the MAC Control.
This value is updated on reception of a valid frame with
(1) a destin… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.5 |
| h3cDot3MpcpRegistrationState A read-only value that identifies the operational state
of the Multi-Point MAC Control sublayer as defined in
[802.3ah] clause 64. When this attribute has the
enumeration unregist… | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.6 |
| h3cDot3MpcpTransmitElapsed A read-only value that reports the interval from last
MPCP frame transmission in increments of Time Quanta
(TQ) 16ns. The value returned shall be (interval from
last MPCP frame tr… | column | TQ (16nsec) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.7 |
| h3cDot3MpcpReceiveElapsed A read-only value that reports the interval from last
MPCP frame reception in increments of Time Quanta (TQ)
16ns. The value returned shall be (interval from last
MPCP last MPCP f… | column | TQ (16nsec) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.8 |
| h3cDot3MpcpRoundTripTime A read-only value that reports the MPCP round trip time
in increments of Time Quanta (TQ) 16ns. The value
returned shall be (round trip time in ns)/16. If this
value exceeds (2^16… | column | TQ (16nsec) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.2.1.1.1.1.9 |