h3cDot3EponMauFecMode
A3COM-HUAWEI-DOT3-EFM-EPON-MIB ·
.1.3.6.1.4.1.43.45.1.10.2.42.2.3.1.1.1.3
Object
column
r/w
Enumeration
A read-write value that indicates the mode of operation of the 1000BASE-PX PHY optional FEC Sublayer for Forward error correction see [802.3ah] clause 65.2). A GET operation returns the current mode of operation the PHY. A SET operation changes the mode of operation of the PHY to the indicated value. unknown(1) value is assigned in initializing, for non FEC support state or type not yet known. disabled(2) value is assigned when Sublayer operating in disabled mode. enabled(3) value is assigned when Sublayer operating in FEC mode. writing can be done all the time.
Context
- MIB
- A3COM-HUAWEI-DOT3-EFM-EPON-MIB
- OID
.1.3.6.1.4.1.43.45.1.10.2.42.2.3.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cDot3EponMauEntry
- Table
- h3cDot3EponMauTable
- Siblings
- 5
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unknown |
2 | disabled |
3 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDot3EponMauPCSCodingViolation For 100 Mb/ s operation it is a count of the number of
times an invalid code-group is received, other than the
/H/ code-group. For 1000 Mb/ s operation it is a count
of the number… | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.10.2.42.2.3.1.1.1.1 |
| h3cDot3EponMauFecAbility A read-only value that indicates the support of
operation of the 1000BASE-PX PHY optional FEC Sublayer
for Forward error correction see [802.3ah] clause 65.2).
unknown(1) value is… | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.2.3.1.1.1.2 |
| h3cDot3EponMauFECCorrectedBlocks For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count
of corrected FEC blocks. This counter will not increment
for other PHY Types. Increment the counter by one for
each received … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.10.2.42.2.3.1.1.1.4 |
| h3cDot3EponMauFECUncorrectableBlocks For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count of
uncorrectable FEC blocks. This counter will not
increment for other PHY Types. Increment the counter by
one for each FEC b… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.10.2.42.2.3.1.1.1.5 |
| h3cDot3EponMauBufferHeadCodingViolation For 1000 Mbps operation it is a counts of the number of
invalid code-group received directly from the link. | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.10.2.42.2.3.1.1.1.6 |