h3cDot11RRMScanChl

A3COM-HUAWEI-DOT11-RRM-MIB · .1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.7

MIB view Table view

Object

scalar r/w Enumeration

Set the scan mode.
auto: When this option is set, all channels of the country code being
      set are scanned.
all: When this option is set, all the channels of the radio band are
     scanned.

Context

MIB: A3COM-HUAWEI-DOT11-RRM-MIB
OID: .1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.7
Type: scalar
Access: readwrite
Status: current
Parent: h3cDot11RRMGlobalCfgPara
Siblings: 9

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	auto
`2`	all

Related Objects

Sibling Objects

Object	Type	Syntax	OID
h3cDot11RRM11nMadtMaxMcs Specify the maximum modulation and coding scheme (MCS) index for 802.11n mandatory rates. The value 255 indicates that no maximum MCS index is specified. No maximum MCS index is …	scalar	Integer32	`.1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.1`
h3cDot11StaInterfNumThreshhd Represents threshold of STA interference. If the value of STA interference exceeds this threshold, STA interference trap will be sent. If the value of this node is zero, STA inter…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.10`
h3cDot11RRM11nSuptMaxMcs Specify the maximum Modulation and Coding Scheme (MCS) index for 802.11n supported rates. The specified maximum MCS index for 802.11n supported rates must be no less than the spec…	scalar	Integer32	`.1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.2`
h3cDot11RRM11gProtect Enable/Disable dot11g protection.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.3`
h3cDot11RRM11aPwrConstrt Configure the power constraint for all 802.11a radios. The configured power constraint is advertised in beacons if spectrum management is enabled. The range of power constraint is…	scalar	dBm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.4`
h3cDot11RRM11aSpectrumManag Enable/Disable spectrum management for 802.11a radios. When spectrum management is enabled, the WLAN sub-system advertises power capabilities of the AP and power constraints appli…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.5`
h3cDot11RRMAutoChlAvoid11h Configure the auto-channel set as non-dot11h channels, this is, only the non-dot11h channels belonging to the country code are scanned during initial channel selection and one of …	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.6`
h3cDot11RRMScanRptIntvel Set the scan report interval.	scalar	second Integer32	`.1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.8`
h3cDot11APInterfNumThreshhd Represents threshold of AP interference . If the value of AP interference exceeds this threshold, AP interference trap will be sent. If the value of this node is zero, AP interfer…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.9`