h3cDot11RRM11gProtect
A3COM-HUAWEI-DOT11-RRM-MIB ·
.1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.3
Object
Enable/Disable dot11g protection.
Context
- MIB
- A3COM-HUAWEI-DOT11-RRM-MIB
- OID
.1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.3- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- h3cDot11RRMGlobalCfgPara
- Siblings
- 9
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDot11RRM11nMadtMaxMcs Specify the maximum modulation and coding scheme (MCS) index for
802.11n mandatory rates.
The value 255 indicates that no maximum MCS index
is specified. No maximum MCS index is … | scalar | Integer32 | .1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.1 |
| h3cDot11StaInterfNumThreshhd Represents threshold of STA interference.
If the value of STA interference exceeds this threshold,
STA interference trap will be sent. If the value of this
node is zero, STA inter… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.10 |
| h3cDot11RRM11nSuptMaxMcs Specify the maximum Modulation and Coding Scheme (MCS) index for
802.11n supported rates.
The specified maximum MCS index for 802.11n supported rates must be no
less than the spec… | scalar | Integer32 | .1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.2 |
| h3cDot11RRM11aPwrConstrt Configure the power constraint for all 802.11a radios.
The configured power constraint is advertised in beacons if spectrum
management is enabled.
The range of power constraint is… | scalar | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.4 |
| h3cDot11RRM11aSpectrumManag Enable/Disable spectrum management for 802.11a radios.
When spectrum management is enabled, the WLAN sub-system advertises
power capabilities of the AP and power constraints appli… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.5 |
| h3cDot11RRMAutoChlAvoid11h Configure the auto-channel set as non-dot11h channels, this is,
only the non-dot11h channels belonging to the country code are scanned
during initial channel selection and one of … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.6 |
| h3cDot11RRMScanChl Set the scan mode.
auto: When this option is set, all channels of the country code being
set are scanned.
all: When this option is set, all the channels of the radio band ar… | scalar | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.7 |
| h3cDot11RRMScanRptIntvel Set the scan report interval. | scalar | second Integer32 | .1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.8 |
| h3cDot11APInterfNumThreshhd Represents threshold of AP interference .
If the value of AP interference exceeds this threshold,
AP interference trap will be sent. If the value of this node
is zero, AP interfer… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.75.8.1.1.9 |