ZXR10-SWITCHQOS-MIB

Source file
ZXR10-SWITCHQOS-MIB
Last revised
Not declared
Imported Objects
SNMPv2-SMI enterprises IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks
SNMPv2-TC RowStatus
Objects (76)
zte
.1.3.6.1.4.1.3902
.1.3.6.1.4.1.3902.3
.1.3.6.1.4.1.3902.3.102
.1.3.6.1.4.1.3902.3.102.3
.1.3.6.1.4.1.3902.3.102.3.1
.1.3.6.1.4.1.3902.3.102.3.1.1
.1.3.6.1.4.1.3902.3.102.3.1.1.1
.1.3.6.1.4.1.3902.3.102.3.1.1.10
.1.3.6.1.4.1.3902.3.102.3.1.1.2
.1.3.6.1.4.1.3902.3.102.3.1.1.3
.1.3.6.1.4.1.3902.3.102.3.1.1.4
.1.3.6.1.4.1.3902.3.102.3.1.1.5
.1.3.6.1.4.1.3902.3.102.3.1.1.6
.1.3.6.1.4.1.3902.3.102.3.1.1.7
.1.3.6.1.4.1.3902.3.102.3.1.1.8
.1.3.6.1.4.1.3902.3.102.3.1.1.9
.1.3.6.1.4.1.3902.3.102.3.2
.1.3.6.1.4.1.3902.3.102.3.2.1
.1.3.6.1.4.1.3902.3.102.3.2.1.1
.1.3.6.1.4.1.3902.3.102.3.2.1.10
.1.3.6.1.4.1.3902.3.102.3.2.1.11
.1.3.6.1.4.1.3902.3.102.3.2.1.12
.1.3.6.1.4.1.3902.3.102.3.2.1.13
.1.3.6.1.4.1.3902.3.102.3.2.1.14
.1.3.6.1.4.1.3902.3.102.3.2.1.15
.1.3.6.1.4.1.3902.3.102.3.2.1.16
.1.3.6.1.4.1.3902.3.102.3.2.1.2
.1.3.6.1.4.1.3902.3.102.3.2.1.3
.1.3.6.1.4.1.3902.3.102.3.2.1.4
.1.3.6.1.4.1.3902.3.102.3.2.1.5
.1.3.6.1.4.1.3902.3.102.3.2.1.6
.1.3.6.1.4.1.3902.3.102.3.2.1.7
.1.3.6.1.4.1.3902.3.102.3.2.1.8
.1.3.6.1.4.1.3902.3.102.3.2.1.9
.1.3.6.1.4.1.3902.3.102.3.3
.1.3.6.1.4.1.3902.3.102.3.3.1
.1.3.6.1.4.1.3902.3.102.3.3.1.1
.1.3.6.1.4.1.3902.3.102.3.3.1.2
.1.3.6.1.4.1.3902.3.102.3.3.1.3
.1.3.6.1.4.1.3902.3.102.3.3.1.4
.1.3.6.1.4.1.3902.3.102.3.3.1.5
.1.3.6.1.4.1.3902.3.102.3.3.1.6
.1.3.6.1.4.1.3902.3.102.3.4
.1.3.6.1.4.1.3902.3.102.3.4.1
.1.3.6.1.4.1.3902.3.102.3.4.1.1
.1.3.6.1.4.1.3902.3.102.3.4.1.10
.1.3.6.1.4.1.3902.3.102.3.4.1.11
.1.3.6.1.4.1.3902.3.102.3.4.1.12
.1.3.6.1.4.1.3902.3.102.3.4.1.13
.1.3.6.1.4.1.3902.3.102.3.4.1.14
.1.3.6.1.4.1.3902.3.102.3.4.1.15
.1.3.6.1.4.1.3902.3.102.3.4.1.16
.1.3.6.1.4.1.3902.3.102.3.4.1.17
.1.3.6.1.4.1.3902.3.102.3.4.1.18
.1.3.6.1.4.1.3902.3.102.3.4.1.19
.1.3.6.1.4.1.3902.3.102.3.4.1.2
.1.3.6.1.4.1.3902.3.102.3.4.1.20
.1.3.6.1.4.1.3902.3.102.3.4.1.21
.1.3.6.1.4.1.3902.3.102.3.4.1.22
.1.3.6.1.4.1.3902.3.102.3.4.1.23
.1.3.6.1.4.1.3902.3.102.3.4.1.24
.1.3.6.1.4.1.3902.3.102.3.4.1.3
.1.3.6.1.4.1.3902.3.102.3.4.1.4
.1.3.6.1.4.1.3902.3.102.3.4.1.5
.1.3.6.1.4.1.3902.3.102.3.4.1.6
.1.3.6.1.4.1.3902.3.102.3.4.1.7
.1.3.6.1.4.1.3902.3.102.3.4.1.8
.1.3.6.1.4.1.3902.3.102.3.4.1.9
.1.3.6.1.4.1.3902.3.102.3.5
.1.3.6.1.4.1.3902.3.102.3.5.1
.1.3.6.1.4.1.3902.3.102.3.5.1.1
.1.3.6.1.4.1.3902.3.102.3.5.1.2
.1.3.6.1.4.1.3902.3.102.3.5.1.3
.1.3.6.1.4.1.3902.3.102.3.5.1.4
.1.3.6.1.4.1.3902.3.102.3.5.1.5
.1.3.6.1.4.1.3902.3.102.3.5.1.6
Dependencies (2) 2 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. ZXR10-SWITCHQOS-MIBzte-ngselected
Type Definitions (11)
OctetString
Enumeration
green-only(1)
OctetString range: 16range: 20
Display format: 2x:2x:2x:2x:2x:2x:2x:2x%4d
Represents an IPv6 network address:

octets contents encoding
1-16 IPv6 address network-byte order
17-20 scope identifier network-byte order

The corresponding InetAddressType value is ipv6(2).

The scope identifier (bytes 17-20) MUST NOT be present
for global IPv6 addresses. For non-global IPv6 addresses
(e.g. link-local or site-local addresses), the scope
identifier MUST always be present. It contains a link
identifier for link-local and a site identifier for
site-local IPv6 addresses.

The scope identifier MUST disambiguate identical address
values. For link-local addresses, the scope identifier will
typically be the interface index (ifIndex as defined in the
IF-MIB, RFC 2233) of the interface on which the address is
configured.

The scope identifier may contain the special value 0
which refers to the default scope. The default scope
may be used in cases where the valid scope identifier
is not known (e.g., a management application needs to
write a site-local InetAddressIPv6 address without
knowing the site identifier value). The default scope
SHOULD NOT be used as an easy way out in cases where
the scope identifier for a non-global IPv6 is known.
Enumeration
all(0)
red(1)
yellow(2)
green(3)
Enumeration
cpu(1)
interface(2)
next-hop(3)
next-hop-ipv6(4)
Enumeration
packet(0)
byte(1)
Enumeration
blind(0)
aware(1)
Enumeration
dropYellow(1)
Enumeration
low(0)
medium(1)
high(2)
Enumeration
forwardRed(1)
Enumeration
cpu(1)
interface(2)