ZTE-AN-UAPS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
24

zxAnUapsGroupTable

table
.1.3.6.1.4.1.3902.1082.40.80.2.2 · 1 row entry · 22 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnUapsGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-UAPS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-UAPS-MIB::zxAnUapsGroupTable' 
This table includes the managed objects of the UAPS group.
zxAnUapsGroupEntry row .1.3.6.1.4.1.3902.1082.40.80.2.2.1
An entry in zxAnUapsGroupTable.
Indexes
Column Syntax OID
zxAnUapsGroupIndex
The index of UAPS group.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.1
zxAnUapsGroupName
The name of UAPS group.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-20
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.2
zxAnUapsPrimaryPortList
The primary UAPS ports. The maximum port numbers joined in this
port list should not be more than 4.
Each member of this variable is ifIndex of a port.
ObjectIdentifierr/w .1.3.6.1.4.1.3902.1082.40.80.2.2.1.3
zxAnUapsSecondaryPortList
The secondary UAPS ports. The maximum port numbers joined in this
port list should not be more than 4. Furthermore, the port numbers
joined in this port list should be equal to the
zxAnUapsPrimaryPortList's. Each num…
ObjectIdentifierr/w .1.3.6.1.4.1.3902.1082.40.80.2.2.1.4
zxAnUapsPortWorkingStatus
It indicates which port group is in working state.
Enumeration
Enumerated Values:
1primaryPortInWorking
2secondaryPortInWorking
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.5
zxAnUapsAutoFailbackEnable
Enables or disables recovery to the UAPS primary port
automatically when the primary port is normal again.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.6
zxAnUapsNextHopIpType
Next hop IP type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.7
zxAnUapsNextHopIp
Next hop IP. Only IPv4 is supported now. If it is 0.0.0.0,
UAPS will not check the link of next hop.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.8
zxAnUapsIpLinkType
The link type used to check IP link status.
Enumerationr/w
Enumerated Values:
1defaultIpLink
2serviceIpLink
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.9
zxAnUapsIpLinkCheckRetries
The retries of checking link status.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.10
zxAnUapsIpLinkCheckTimeout
The timeout of checking link status.
secondsInteger32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.11
zxAnUapsIpLinkStatus
The status of IP link.
Enumeration
Enumerated Values:
1up
2down
3testing
4invalid
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.12
zxAnUapsSwapMode
It indicates swap mode.
common: If one port of working port list down, all ports will
swap to slave port list.
trunk: Only when all working ports down, ports will swap to
slave port list.
upPortNum: If the nu…
Enumerationr/w
Enumerated Values:
1common
2trunk
3upPortNum
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.13
zxAnUapsForceSwap
Force to swap the primary and secondary ports.
Enumerationr/w
Enumerated Values:
1swap
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.14
zxAnUapsSwapReason
It indicates the reason of swap.
failback(1): Primary port is recovery.
failoverByPhyLinkDown(2): Primary port is in fault of physical
layer.
failoverByIpLinkDown(3): Primary po…
Enumeration
Enumerated Values:
1failback
2failoverByPhyLinkDown
3failoverByIpLinkDown
4forceSwap
5swapByPhyLinkUp
6swapByPortAdded
7swapByPortDeleted
8swapBySwapModeChanged
255noSwap
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.15
zxAnUapsSwapRequestInCache
It indicates the swap request in memory.
Bits
Enumerated Values:
0failback
1failoverByPhyLinkDown
2failoverByIpLinkDown
3forceSwap
4swapByPhyLinkUp
5swapByPortAdded
6swapByPortDeleted
7swapBySwapModeChanged
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.16
zxAnUapsSwapLastRequest
It indicates the last swap request.
Enumeration
Enumerated Values:
1failback
2failoverByPhyLinkDown
3failoverByIpLinkDown
4forceSwap
5swapByPhyLinkUp
6swapByPortAdded
7swapByPortDeleted
8swapBySwapModeChanged
255noSwap
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.17
zxAnUapsProtectionTime
The protection time of UAPS. When the fail time of port is larger
than it, the UAPS module should failover to the secondary port.
secondsInteger32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.18
zxAnUapsIsInProtectionTime
It indicates if the UAPS is in protection time status.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.19
zxAnUapsSlavePortTxOptShutdown
If it is enabled, the slave port transmitted optical signal will
be shutdown.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.20
zxAnUapsFailureTime
It indicates the time since the secondary UAPS ports became in
working or any port of this UAPS group was down.
After the primary UAPS ports become in working and all ports of
this UAPS group are up, it's value will b…
SecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.21
zxAnUapsGroupRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to createAndGo(4).

To delete a row in this table, a manager must
set this object to destroy(…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.80.2.2.1.50

zxAnUapsPrimaryPortsTable

table
.1.3.6.1.4.1.3902.1082.40.80.2.3 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnUapsPrimaryPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-UAPS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-UAPS-MIB::zxAnUapsPrimaryPortsTable' 
This table includes the primary ports of the UAPS group.
zxAnUapsPrimaryPortsEntry row .1.3.6.1.4.1.3902.1082.40.80.2.3.1
An entry in zxAnUapsPrimaryPortsTable.
Indexes
Column Syntax OID
zxAnUapsPrimaryPortsRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to createAndGo(4).

To delete a row in this table, a manager must
set this object to destroy(…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.80.2.3.1.50

zxAnUapsSecondaryPortsTable

table
.1.3.6.1.4.1.3902.1082.40.80.2.4 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnUapsSecondaryPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-UAPS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-UAPS-MIB::zxAnUapsSecondaryPortsTable' 
This table includes the secondary ports of the UAPS group.
zxAnUapsSecondaryPortsEntry row .1.3.6.1.4.1.3902.1082.40.80.2.4.1
An entry in zxAnUapsSecondaryPortsTable.
Indexes
Column Syntax OID
zxAnUapsSecondaryPortsRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to createAndGo(4).

To delete a row in this table, a manager must
set this object to destroy(…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.80.2.4.1.50