ZTE-AN-SPAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
31
.1.3.6.1.4.1.3902.1082.80.10.2.2 · 1 row entry · 31 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnSpanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-SPAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-SPAN-MIB::zxAnSpanTable'
This table represents the switched port 
analyzer related parameters.
zxAnSpanEntry row .1.3.6.1.4.1.3902.1082.80.10.2.2.1
An entry in zxAnSpanTable.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP set …
Column Syntax OID
The index of a session.
Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.1
The SPAN type of a session.
span(1) - Local Switched Port Analyzer.
rspan(2) - Remote SPAN.
erspan(3) - Enhanced Remoted SPAN.
unknown(255) - Unknown. this value is read-only and
Enumerationr/w
Enumerated Values:
1span
2rspan
3erspan
255unknown
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.2
This object indicates whether the packets sent
to the CPU are mirrored:
enabled(1) - the packets sent to the CPU are mirrored.
disabled(2) - the packets sent to the CPU are not mirrored.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.3
The direction of cpu packet.
Enumerationr/w
Enumerated Values:
1both
2egress
3ingress
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.4
It is a sequence of some source ports.
Supports ethernet interface, inner port, smartgroup.
The format of portlist is like this:
.ifIndex1.zxAnSubIfIndex1.ifIndex2.zxAnSubIfIndex2...
| port…
ObjectIdentifierr/w .1.3.6.1.4.1.3902.1082.80.10.2.2.1.5
The traffic direction list of the source port list.
The format of direction list is like this:
.direction1.direction2...
|port1 |port2 |...

Each value of the sequence represents a traffic directio…
ObjectIdentifierr/w .1.3.6.1.4.1.3902.1082.80.10.2.2.1.6
The interface index of the first source port.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.7
The sub-interface index of the first source port.
ZTE-AN-TC-MIBZxAnSubIfIndexr/w
Description:
ZxAnSubIfIndex represents a sub-interface of a physical port.
It must be used with ifIndex. ZxAnSubIfIndex uses a complex coding
to construct the subIfIndex. Each bit field of ZxAnSubIfIndex has
its definitions such as …
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.8
The interface index of the seoond source port.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.9
The sub-interface index of the second source port.
ZTE-AN-TC-MIBZxAnSubIfIndexr/w
Description:
ZxAnSubIfIndex represents a sub-interface of a physical port.
It must be used with ifIndex. ZxAnSubIfIndex uses a complex coding
to construct the subIfIndex. Each bit field of ZxAnSubIfIndex has
its definitions such as …
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.10
The interface index of the third source port.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.11
The sub-interface index of the third source port.
ZTE-AN-TC-MIBZxAnSubIfIndexr/w
Description:
ZxAnSubIfIndex represents a sub-interface of a physical port.
It must be used with ifIndex. ZxAnSubIfIndex uses a complex coding
to construct the subIfIndex. Each bit field of ZxAnSubIfIndex has
its definitions such as …
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.12
The interface index of the fourth source port.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.13
The sub-interface index of the fourth source port.
ZTE-AN-TC-MIBZxAnSubIfIndexr/w
Description:
ZxAnSubIfIndex represents a sub-interface of a physical port.
It must be used with ifIndex. ZxAnSubIfIndex uses a complex coding
to construct the subIfIndex. Each bit field of ZxAnSubIfIndex has
its definitions such as …
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.14
The traffic direction of the source ports.
Enumerationr/w
Enumerated Values:
1both
2egress
3ingress
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.15
The ifIndex of SPAN and RSPAN destination port.
Supports ethernet interface and smartgroup.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.20
The traffic VLAN ID of RSPAN or ERSPAN.
Integer32r/w
Constraints:
range: 1-4094
range: 65535-65535
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.21
The traffic CoS of RSPAN or ERSPAN.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.22
The traffic TPID of RSPAN or ERSPAN.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.23
The type of IP address about destination IP.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.24
The destination IP of ERSPAN.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.25
The type of IP address about source IP.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.26
The source IP of ERSPAN.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.27
The TTL of ERSPAN.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.28
The DSCP of ERSPAN.
Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.29
The destination MAC address of ERSPAN.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.30
The source MAC address of ERSPAN.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.31
The sub-interface index of destination port.
ZTE-AN-TC-MIBZxAnSubIfIndexr/w
Description:
ZxAnSubIfIndex represents a sub-interface of a physical port.
It must be used with ifIndex. ZxAnSubIfIndex uses a complex coding
to construct the subIfIndex. Each bit field of ZxAnSubIfIndex has
its definitions such as …
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.32
The encapsulation type of ERSPAN.
gre(1): Generic routing encapsulation(GRE).
udp(2): UDP encapsulation.
Enumerationr/w
Enumerated Values:
1gre
2udp
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.33
Name of the time range.
Empty string means all the time the session is valid.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.34
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.3902.1082.80.10.2.2.1.50