ZTE-AN-QOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
68

zxAnQosCosToCosPrfTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosCosToCosPrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosCosToCosPrfTable' 
This table contains CosToCos mapping information. One entry in
this table reflects a profile defined which can be used to
configure an interface.
zxAnQosCosToCosPrfEntry row .1.3.6.1.4.1.3902.1082.50.1.2.1.2.1
zxAnQosCosToCosPrfTable entry.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP se…
Indexes
Column Syntax OID
zxAnQosCosToCosPrfName
The profile name is a display string. It is an index of this
table.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.1.2.1.1
zxAnQosCosToCos
The values for CoS remarking. For example, the value
'00 01 02 03 04 05 06 07' means CoS 0 is remarked to CoS 0,...,
CoS 7 is remarked to CoS 7. The range of CoS is 0-7.
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.3902.1082.50.1.2.1.2.1.2
zxAnQosCosToCosPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.50.1.2.1.2.1.50

zxAnQosDscpToDscpPrfTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.1.3 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosDscpToDscpPrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosDscpToDscpPrfTable' 
This table contains DSCP remark information.
One entry in this table reflects a profile defined which can be
used to configure an interface.
zxAnQosDscpToDscpPrfEntry row .1.3.6.1.4.1.3902.1082.50.1.2.1.3.1
zxAnQosDscpToDscpPrfTable entry.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP …
Indexes
Column Syntax OID
zxAnQosDscpToDscpPrfName
The profile name is a display string. It is an index of
this table.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.1.3.1.1
zxAnQosDscpToDscp
The values for DSCP priority remarking. For example,
the value '00 01 ...3F' means DSCP priority 0 is remarked
to DSCP priority 0,...,DSCP priority 63 is remarked to
DSCP priority 63. The range of DSCP priority is 0-63.
OctetStringr/w
Constraints:
range: 64-64
 .1.3.6.1.4.1.3902.1082.50.1.2.1.3.1.2
zxAnQosDscpToDscpPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.50.1.2.1.3.1.50

zxAnQosDscpToCosPrfTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.1.4 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosDscpToCosPrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosDscpToCosPrfTable' 
This table contains DSCP to CoS mapping information.
One entry in this table reflects a profile defined which can be
used to configure an interface.
zxAnQosDscpToCosPrfEntry row .1.3.6.1.4.1.3902.1082.50.1.2.1.4.1
zxAnQosDscpToCosPrfTable entry.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP s…
Indexes
Column Syntax OID
zxAnQosDscpToCosPrfName
The profile name is a display string. It is an index of
this table.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.1.4.1.1
zxAnQosDscpToCos
The DSCP mapping CoS.
For example, the value '00 01...07' means DSCP priority 0 is
mapping to CoS 0,...,DSCP priority 63 is mapping to CoS 7.
The range of CoS is 0-7.
OctetStringr/w
Constraints:
range: 64-64
 .1.3.6.1.4.1.3902.1082.50.1.2.1.4.1.2
zxAnQosDscpToCosPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.50.1.2.1.4.1.50

zxAnQosMplsTcToCosPrfTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosMplsTcToCosPrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosMplsTcToCosPrfTable' 
This table contains MPLS TC value to CoS mapping information.
One entry in this table reflects a profile defined which can be
used to configure an interface.
zxAnQosMplsTcToCosPrfEntry row .1.3.6.1.4.1.3902.1082.50.1.2.1.6.1
zxAnQosMplsTcToCosPrfTable entry.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP…
Indexes
Column Syntax OID
zxAnQosMplsTcToCosPrfName
The profile name is a display string. It is an index of
this table.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.1.6.1.1
zxAnQosMplsTcToCos
The MPLS TC mapping to CoS.
For example, '00 01 02 03 04 05 06 07' means TC 0 is mapping to
CoS 0, ..., TC 7 is mapping to CoS 7.
The range of MPLS TC value and CoS are 0-7.
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.3902.1082.50.1.2.1.6.1.2
zxAnQosMplsTcToCosPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.50.1.2.1.6.1.50

zxAnQosCosToMplsTcPrfTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.1.7 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosCosToMplsTcPrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosCosToMplsTcPrfTable' 
This table contains CoS to MPLS TC mapping
information. One entry in this table reflects a profile defined
which can be used to configure an interface.
zxAnQosCosToMplsTcPrfEntry row .1.3.6.1.4.1.3902.1082.50.1.2.1.7.1
zxAnQosCosToMplsTcPrfTable entry.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP…
Indexes
Column Syntax OID
zxAnQosCosToMplsTcPrfName
The profile name is a display string. It is an index of
this table.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.1.7.1.1
zxAnQosCosToMplsTc
The CoS mapping MPLS TC value.
For example, '00 01 02 03 04 05 06 07' means CoS 0 is
mapping to TC value 0,..., CoS 7 is mapping to TC
value 7. The range of CoS and TC value are 0-7.
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.3902.1082.50.1.2.1.7.1.2
zxAnQosCosToMplsTcPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.50.1.2.1.7.1.50

zxAnQosCosToDeiPrfTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.1.9 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosCosToDeiPrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosCosToDeiPrfTable' 
This table contains CoS to DEI (Drop Eligible Indicator) mapping
information.
One entry in this table reflects a profile defined which can be
used to configure an interface.
zxAnQosCosToDeiPrfEntry row .1.3.6.1.4.1.3902.1082.50.1.2.1.9.1
zxAnQosCosToDeiPrfTable entry.
The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP set operation.
…
Indexes
Column Syntax OID
zxAnQosCosToDeiPrfName
The profile name is a display string. It is an index of
this table.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.1
zxAnQosCosToDeiMappingType
ccosToSdei(1) -- mapping C-Tag CoS to S-DEI.
ccosToCdei(2) -- mapping C-Tag CoS to C-DEI.
scosToSdei(3) -- mapping S-Tag CoS to S-DEI.
Enumerationr/w
Enumerated Values:
1ccosToSdei
2ccosToCdei
3scosToSdei
 .1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.2
zxAnQosCosToDei
The CoS mapping to DEI value.
For example, '00 01 02 00 01 02 01 02' means CoS 0 is
mapping to DEI 0, CoS 1 is mapping to DEI 1, ..., CoS 7 is mapping
to DEI 2. The range of DEI is 0-2.
'0' -- green packet.
'1' -- yel…
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.3
zxAnQosCosToDeiRowStatus
The status of this conceptual row.
The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.
To create a row in this table, a manager must set this object to
createAndGo(4), and must comply…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.50

zxAnQosQueueConfPrfTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.2.7 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosQueueConfPrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosQueueConfPrfTable' 
QoS queue configuration profile table.
zxAnQosQueueConfPrfEntry row .1.3.6.1.4.1.3902.1082.50.1.2.2.7.1
QoS queue configuration profile entry.
Indexes
Column Syntax OID
zxAnQosQueueConfPrfName
QoS queue configuration profile name.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.1
zxAnQosQueueConfDepthRatio
QoS queue depth ratio.
For example, the value '01 02 04 06 02 02 02 50' means depth ratio
of queue0 is 1, ..., depth ratio of queue7 is 80.
The range of depth ratio is 1 to 100.
The number of queues is fixed to zxAnQosG…
percentOctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.2
zxAnQosQueueConfBufferSize
QoS queue buffer size.
kbytesInteger32r/w
Constraints:
range: 1-102400
 .1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.3
zxAnQosQueueConfPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.50

zxAnQosQueueWredConfTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.2.30 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosQueueWredConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosQueueWredConfTable' 
WRED configuration table.
zxAnQosQueueWredConfEntry row .1.3.6.1.4.1.3902.1082.50.1.2.2.30.1
WRED configuration entry.
Indexes
Column Syntax OID
zxAnQosQWredConfQueueNo
The No. of the queue.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.1
zxAnQosQWredConfYellowLThresh
The lower WRED threshold parameter of a threshold number for the
yellow packet when WRED dropping algorithm is used.
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.2
zxAnQosQWredConfYellowHThresh
The higher WRED threshold parameter of a threshold number for the
yellow packets when WRED dropping algorithm is used.
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.3
zxAnQosQWredConfYellowMaxProb
Maximum dropping probability of yellow packet.
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.4
zxAnQosQWredConfGreenLThresh
The lower WRED threshold parameter of a threshold number for the
green packet when WRED dropping algorithm is used.
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.5
zxAnQosQWredConfGreenHThresh
The higher WRED threshold parameter of a threshold number for the
green packet when WRED dropping algorithm is used.
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.6
zxAnQosQWredConfGreenMaxProb
Maximum dropping probability of green packet.
percentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.7

zxAnQosIfConfTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.3.2 · 1 row entry · 11 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosIfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosIfConfTable' 
This table contains configuration data for interface, include
ethernet interface, GPON OLT and ONU interface.
zxAnQosIfConfEntry row .1.3.6.1.4.1.3902.1082.50.1.2.3.2.1
An entry in zxAnQosIfConfTable.
This table contains QoS configuration parameters for physical
interface (include ethernet interface and GPON OLT interface)
and GPON ONU interface.

For ethernet interface, pa…
Indexes
Column Syntax OID
zxAnQosIfTrustMode
Trust cos or trust dscp. Not support for gpon olt interface.
Enumerationr/w
Enumerated Values:
1cos
2dscp
255notSupport
 .1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.3
zxAnQosIfDefaultCos
Default CoS, 255 means not support.
This object is valid only when zxAnQosIfTrustMode is set to CoS.
Integer32r/w
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.5
zxAnQosIfCosToCosPrf
CoS to CoS mapping profile name.
An empty string means unsupported.
Valid for gpon onu interface.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.7
zxAnQosIfDscpToDscpPrf
DSCP remarking profile name.
This object is valid only when zxAnQosIfTrustMode is set to dscp.
An empty string means unsupported.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.8
zxAnQosIfDscpToCosPrf
DSCP to CoS mapping profile name.
This object is valid only when zxAnQosIfTrustMode is set to dscp.
An empty string means unsupported.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.9
zxAnQosIfCosOverride
Enable or disable CoS Override.
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupport
 .1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.12
zxAnQosIfEgressCosOverride
Enable or disable Egress CoS Override.
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupport
 .1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.14
zxAnQosIfEgressCosToCosPrf
Egress CoS to CoS mapping profile name.
An empty string means unsupported.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.17
zxAnQosIfEgressDscpToCosPrf
Egress DSCP to CoS mapping profile name.
An empty string means unsupported.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.18
zxAnQosIfQueueWredPrf
Queue WRED profile name.
An empty string means unsupported.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.23
zxAnQosIfQueueConfPrf
Queue configuration profile name.
An empty string means unsupported.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.26

zxAnQosIfQueueStatsTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.4.1 · 1 row entry · 6 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosIfQueueStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosIfQueueStatsTable' 
Interfaces queue statistics table.
zxAnQosIfQueueStatsEntry row .1.3.6.1.4.1.3902.1082.50.1.2.4.1.1
An entry in zxAnQosIfQueueStatsTable.
This table contains queue statistics for GPON OLT interfaces
and P2P interfaces.
It includes zxAnQosIfQueueStatsPassPkts,
zxAnQosIfQueueStatsDiscardPkts and zxAnQosIfQueueStatsReset.
Indexes
Column Syntax OID
zxAnQosIfQueueStatsQueueId
Queue ID.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.1
zxAnQosIfQueueStatsForwardPkts
Forwarding packets.
Value 0x7fffffffffffffff means not supported.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.2
zxAnQosIfQueueStatsDiscardPkts
Discarded packets.
Value 0x7fffffffffffffff means not supported.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.3
zxAnQosIfQueueDiscardGreenPkts
Discarded green packets.
Value 0x7fffffffffffffff means not supported.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.4
zxAnQosIfQueueDiscardYellowPkts
Discarded yellow packets.
Value 0x7fffffffffffffff means not supported.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.5
zxAnQosIfQueueStatsReset
Set the number of packets to zero.
When getting this variable, this object always returns 1.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.50

zxAnQosBrgIfQueueStatsTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.4.2 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosBrgIfQueueStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosBrgIfQueueStatsTable' 
A table containing queue statistics information.
zxAnQosBrgIfQueueStatsEntry row .1.3.6.1.4.1.3902.1082.50.1.2.4.2.1
An entry in zxAnQosBrgIfQueueStatsTable.
This table contains queue statistics for bridge interfaces.
Indexes
Column Syntax OID
zxAnQosBrgIfQStatsQueueId
Queue ID.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.1
zxAnQosBrgIfQStatsForwardPkts
Forwarding packets.
Value 0x7fffffffffffffff means not supported.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.2
zxAnQosBrgIfQStatsDiscardPkts
Discarded packets.
Value 0x7fffffffffffffff means not supported.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.3
zxAnQosBrgIfQDiscardGreenPkts
Discarded green packets.
Value 0x7fffffffffffffff means not supported.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.4
zxAnQosBrgIfQDiscardYellowPkts
Discarded yellow packets.
Value 0x7fffffffffffffff means not supported.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.5
zxAnQosBrgIfQStatsReset
Set the number of packets to zero.
When getting this variable, this object always returns 1.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.49
zxAnQosBrgIfQStatsRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.50

zxAnQosIfQDiscardPktThreshTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.4.3 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosIfQDiscardPktThreshTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosIfQDiscardPktThreshTable' 
A table containing discarded packet threshold information.
zxAnQosIfQDiscardPktThreshEntry row .1.3.6.1.4.1.3902.1082.50.1.2.4.3.1
An entry in zxAnQosIfQDiscardPktThreshTable.
This table contains discarded packet threshold for queue statistics.
Indexes
Column Syntax OID
zxAnQosIfQDiscardPktThrQueueId
Queue ID.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.1
zxAnQosIfQShortDiscardPktThresh
Short interval discarded packet threshold.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.2
zxAnQosIfQLongDiscardPktThresh
Long interval discarded packet threshold.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.3
zxAnQosIfQDiscardPktThrRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.50

zxAnQosVlanCosToDeiPrfConfTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.5.2 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosVlanCosToDeiPrfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosVlanCosToDeiPrfConfTable' 
A table containing VLAN CoS to DEI (Drop Eligible Indicator)
profile information.
zxAnQosVlanCosToDeiPrfConfEntry row .1.3.6.1.4.1.3902.1082.50.1.2.5.2.1
Entry for zxAnQosVlanCosToDeiPrfConfTable.
Indexes
Column Syntax OID
zxAnQosVlanCosToDeiPrfConfVid
VLAN ID.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
Description:
A 12-bit VLAN ID used in the VLAN Tag header.
 .1.3.6.1.4.1.3902.1082.50.1.2.5.2.1.1
zxAnQosVlanCosToDeiPrfConfName
CoS to DEI profile name.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.5.2.1.2
zxAnQosVlanCosToDeiPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.50.1.2.5.2.1.50

zxAnQosVlanEgressDeiTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.5.3 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosVlanEgressDeiTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosVlanEgressDeiTable' 
A table containing VLAN egress DEI information.
zxAnQosVlanEgressDeiEntry row .1.3.6.1.4.1.3902.1082.50.1.2.5.3.1
Entry for zxAnQosVlanEgressDeiTable.
Indexes
Column Syntax OID
zxAnQosVlanEgressDeiVid
VLAN ID.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
Description:
A 12-bit VLAN ID used in the VLAN Tag header.
 .1.3.6.1.4.1.3902.1082.50.1.2.5.3.1.1
zxAnQosVlanEgressDeiRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.50.1.2.5.3.1.50

zxAnQosVlanCosToCosPrfConfTable

table
.1.3.6.1.4.1.3902.1082.50.1.2.5.4 · 1 row entry · 5 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnQosVlanCosToCosPrfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-QOS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-QOS-MIB::zxAnQosVlanCosToCosPrfConfTable' 
A table containing VLAN CoS remarking information.
zxAnQosVlanCosToCosPrfConfEntry row .1.3.6.1.4.1.3902.1082.50.1.2.5.4.1
Entry for zxAnQosVlanCosToCosPrfConfTable.
Indexes
Column Syntax OID
zxAnQosVlanCosToCosPrfConfSVid
SVLAN ID.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
Description:
A 12-bit VLAN ID used in the VLAN Tag header.
 .1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.1
zxAnQosVlanCosToCosPrfConfCVid
CVLAN ID.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.2
zxAnQosVlanCosToCosPrfConfMode
CoS remarking mode.
Enumeration
Enumerated Values:
1networkSide
2userSide
 .1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.3
zxAnQosVlanCosToCosPrfConfName
CoS to CoS profile name.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.4
zxAnQosVlanCosToCosPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.50