ZTE-AN-IGMP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
20
Rows
20
Columns
99

zxAnIgmpProtoIfTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.1.2.2 · 1 row entry · 5 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpProtoIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpProtoIfTable' 
A table that contains all IGMP protocol information of an user 
interface.
zxAnIgmpProtoIfEntry row .1.3.6.1.4.1.3902.1082.60.1.2.1.2.2.1
A list of entries of zxAnIgmpProtoIfTable.
Indexes
Column Syntax OID
zxAnIgmpIfAdminStatus
The administrative status of port's IGMP service.
The value 255 means the object is not supported.
Enumerationr/w
Enumerated Values:
1enabled
3drop
255notSupport
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.2.1.1
zxAnIgmpIfProtoVersion
The max version of IGMP protocol which is supported on this port.
The value 255 means the object is not supported.
Enumerationr/w
Enumerated Values:
1igmpv1
2igmpv2
3igmpv3
255notSupport
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.2.1.2
zxAnIgmpIfFastLeaveEnable
The administrative status of port's fast-leave property.
The value 255 means the object is not supported.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
255notSupport
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.2.1.3
zxAnIgmpIfBandwidth
Multicast bandwidth of this port.
Uplink port/PON port: The valid range is 10240~10240000 kbps, and
the default value is 1024000 kbps.
VPort: The valid range is 100~204800 kbps, and the default value
is 102400 kbps.
T…
kbpsInteger32r/w
Constraints:
range: 2147483647-2147483647
range: 100-10240000
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.2.1.4
zxAnIgmpIfMaxGroups
Maximum multicast groups that the port may join.
The value 0 means the port cannot join any groups.
The value 2147483647 means the object is not supported.
Integer32r/w
Constraints:
range: 2147483647-2147483647
range: 0-8192
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.2.1.5

zxAnIgmpProtoMVlanTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.1.2.3 · 1 row entry · 12 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpProtoMVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpProtoMVlanTable' 
A table that contains IGMP protocol information in Multicast
VLAN.
zxAnIgmpProtoMVlanEntry row .1.3.6.1.4.1.3902.1082.60.1.2.1.2.3.1
A list of entries of zxAnIgmpProtoMVlanTable.
Indexes
Column Syntax OID
zxAnIgmpMVid
Multicast VLAN ID.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.3.1.1
zxAnIgmpMVlanIgmpAdminStatus
The administrative status of IGMP service in this MVLAN.
Enumerationr/w
Enumerated Values:
1enabled
3drop
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.3.1.2
zxAnIgmpMVlanIgmpV1OperMode
The operational mode of IGMP v1 packet.
Enumerationr/w
Enumerated Values:
1accept
3drop
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.3.1.3
zxAnIgmpMVlanIgmpV2OperMode
The operational mode of IGMP v2 packet.
Enumerationr/w
Enumerated Values:
1accept
3drop
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.3.1.4
zxAnIgmpMVlanIgmpV3OperMode
The operational mode of IGMP v3 packet.
Enumerationr/w
Enumerated Values:
1accept
3drop
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.3.1.5
zxAnIgmpMVlanIgmpWorkMode
The IGMP work mode in this MVLAN. The meanings of the values
are:
snooping(1) - transparently forward IGMP packet, snooping
is defined in RFC 4541 and TR-101.
spr(2) - transparently forward IGMP general …
Enumerationr/w
Enumerated Values:
1snooping
2spr
3proxy
4router
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.3.1.6
zxAnIgmpMVlanIgmpSsmCtrlMode
The ASM/SSM service control model. The meanings of the values
are:
asm(1) - only ASM(*, G) requests are permitted, ASM(Any-
Source Multicast) is defined in RFC 1112.
ssm(2) - only SSM(S, G) requests are …
Enumerationr/w
Enumerated Values:
1asm
2ssm
3asmAndSsm
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.3.1.7
zxAnIgmpMVlanIgmpSsmIpAddr
The SSM IP address in this MVLAN.
All SSM(S, G) request must be in the same IP network segment as
the configued SSM IP address and netmask.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.3.1.8
zxAnIgmpMVlanIgmpSsmIpAddrMask
The mask of SSM IP address in this MVLAN.
All SSM(S, G) request must be in the same IP network segment as
the configued SSM IP address and netmask.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.3.1.9
zxAnIgmpMVlanIgmpCVid
Multicast C-VID.
Value 0 means no C-VID tag.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.3.1.10
zxAnIgmpMvlanIgmpMaxGroups
Maximum multicast groups that the MVLAN may join. The value 0 means
the MVLAN cannot join any groups.
Integer32r/w
Constraints:
range: 0-8192
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.3.1.11
zxAnIgmpMVlanGenQryPktTxGrpMode
The general query packets transmission group mode only on pon
interfaces.
Enumerationr/w
Enumerated Values:
1usersInGroup
2allUsers
 .1.3.6.1.4.1.3902.1082.60.1.2.1.2.3.1.12

zxAnIgmpSnoopingMVlanTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.1.3.2 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpSnoopingMVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpSnoopingMVlanTable' 
A table that contains IGMP Snooping informations in multicast
VLAN.
zxAnIgmpSnoopingMVlanEntry row .1.3.6.1.4.1.3902.1082.60.1.2.1.3.2.1
A list of entries of zxAnIgmpSnoopingMVlanTable.
Indexes
Column Syntax OID
zxAnIgmpSnoopingMVlanAgingTime
The timeout period in seconds for aging out multicast group
memberships dynamically learned with IGMP which operates on
a per interface per VLAN per multicast group basis.
Note that it only takes effect in snooping mode.
secondsInteger32r/w
Constraints:
range: 30-3600
 .1.3.6.1.4.1.3902.1082.60.1.2.1.3.2.1.1

zxAnIgmpProxyMVlanTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.1.4.2 · 1 row entry · 18 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpProxyMVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpProxyMVlanTable' 
A table that contains IGMP proxy informations in Multicast
VLAN.
zxAnIgmpProxyMVlanEntry row .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1
A list of entries of zxAnIgmpProxyMVlanTable.
Indexes
Column Syntax OID
zxAnIgmpMVlanRobustnessVariable
IGMP robustness variable in the MVLAN.
Integer32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.1
zxAnIgmpMVlanHostVersion
The administrative version of IGMP packet sent on the host
interface.
auto(1) - IGMP host version is dynamicly determined by
the attached router version, according to IGMP Host
Compatibility Mode des…
Enumerationr/w
Enumerated Values:
1auto
2igmpv2
3igmpv3
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.2
zxAnIgmpMVlanHostIpAddr
The source IP address of IGMP packet sent on the host
interface.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.3
zxAnIgmpMVlanUnsolReportInterval
IGMP unsolicited report interval in the MVLAN.
secondsInteger32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.4
zxAnIgmpMVlanHostQuerier
The IP address of the IGMP Querier attached on the host
interface which is learned from received IGMP general query.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.5
zxAnIgmpMVlanHostActualVersion
The running version of IGMP packet sent on the host interface.
Enumeration
Enumerated Values:
1igmpv1
2igmpv2
3igmpv3
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.6
zxAnIgmpMVlanHostV1QuerierTimer
The time remaining until the host assumes that there are
no IGMPv1 routers present on the interface. While this is
non-zero, the host will reply to all queries with version 1
membership reports. This variable applies …
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.7
zxAnIgmpMVlanHostV2QuerierTimer
The time remaining until the host assumes that there are
no IGMPv2 routers present on the interface. While this is
non-zero, the host will reply to all queries with version 1
or 2 membership reports. This variable app…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.8
zxAnIgmpMVlanRouterIpAddr
The source IP address of IGMP query packet sent on the router
interface.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.9
zxAnIgmpMVlanQueryInterval
IGMP general query interval in the MVLAN.
secondsInteger32r/w
Constraints:
range: 30-300
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.10
zxAnIgmpMVlanQueryRespInterval
IGMP query max response time in the MVLAN.
0.1secondInteger32r/w
Constraints:
range: 10-250
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.11
zxAnIgmpMVlanLastMemberQryIntvl
IGMP last member query interval in the MVLAN.
0.1secondInteger32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.12
zxAnIgmpMVlanLastMemberQryCount
IGMP last member query count in the MVLAN.
Integer32r/w
Constraints:
range: 2-5
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.13
zxAnIgmpMVlanStartUpQryInterval
IGMP startup query interval in the MVLAN.
When system is start up or port is up
secondsInteger32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.14
zxAnIgmpMVlanStartUpQryCount
IGMP startup query count in the MVLAN.
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.15
zxAnIgmpMVlanIgmpPacketPriority
802.1p priority of IGMP packet sent by the device.
Note that it only takes effect in proxy and SPR mode.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.16
zxAnIgmpMVlanQryPktProtoVersion
The version of IGMP general query packet.
igmpv1(1) - IGMPv1.
igmpv2(2) - IGMPv2.
igmpv3(3) - IGMPv3.
Enumerationr/w
Enumerated Values:
1igmpv1
2igmpv2
3igmpv3
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.17
zxAnIgmpMVlanIgmpPktDscp
DSCP of IGMP packet sent by the device.
Note that it only takes effect in proxy and SPR mode.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.1082.60.1.2.1.4.2.1.18

zxAnIgmpMgmtMVlanTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.2.2 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpMgmtMVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpMgmtMVlanTable' 
A table used to create or remove MVLAN.
zxAnIgmpMgmtMVlanEntry row .1.3.6.1.4.1.3902.1082.60.1.2.2.2.1
A list of entries of zxAnIgmpMgmtMVlanTable.
Indexes
Column Syntax OID
zxAnIgmpMVlanGroupFilterEnable
The administrative status of group filter in the MVLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.60.1.2.2.2.1.1
zxAnIgmpMVlanRowStatus
The status of this conceptual row.

The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to createAndGo(4…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.60.1.2.2.2.1.50

zxAnIgmpMgmtMVlanRecvIfTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.2.3 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpMgmtMVlanRecvIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpMgmtMVlanRecvIfTable' 
A Table used to add or delete receiving port in a MVLAN.
zxAnIgmpMgmtMVlanRecvIfEntry row .1.3.6.1.4.1.3902.1082.60.1.2.2.3.1
A list of entries of zxAnIgmpMgmtMVlanRecvIfTable.
Indexes
Column Syntax OID
zxAnIgmpMgmtMVlanRecvIfRowStatus
The status of this conceptual row.

The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to createAndGo(4…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.60.1.2.2.3.1.50

zxAnIgmpMgmtMVlanSrcIfTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.2.4 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpMgmtMVlanSrcIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpMgmtMVlanSrcIfTable' 
A Table used to add or delete source port in a MVLAN.
zxAnIgmpMgmtMVlanSrcIfEntry row .1.3.6.1.4.1.3902.1082.60.1.2.2.4.1
A list of entries of zxAnIgmpMgmtMVlanSrcIfTable.
Indexes
Column Syntax OID
zxAnIgmpMVlanSrcIfRowStatus
The status of this conceptual row.

The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to createAndGo(4…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.60.1.2.2.4.1.50

zxAnIgmpMgmtGroupFilterTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.2.6 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpMgmtGroupFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpMgmtGroupFilterTable' 
A table used to add or delete group-filter group segment.
zxAnIgmpMgmtGroupFilterEntry row .1.3.6.1.4.1.3902.1082.60.1.2.2.6.1
A list of entries of zxAnIgmpMgmtGroupFilterTable.
Indexes
Column Syntax OID
zxAnIgmpGroupFilterStartGrpIp
Start group ip address of a group segment.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1082.60.1.2.2.6.1.1
zxAnIgmpGroupFilterEndGrpIp
End group ip address of a group segment.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1082.60.1.2.2.6.1.2
zxAnIgmpGroupFilterRowStatus
The status of this conceptual row.

The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to createAndGo(4…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.60.1.2.2.6.1.50

zxAnIgmpMgmtGroupStaticIfTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.2.7 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpMgmtGroupStaticIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpMgmtGroupStaticIfTable' 
A table used to bind or unbind static receiving port to or from 
multicast group.
zxAnIgmpMgmtGroupStaticIfEntry row .1.3.6.1.4.1.3902.1082.60.1.2.2.7.1
A list of entries of zxAnIgmpMgmtGroupStaticIfTable.
Indexes
Column Syntax OID
zxAnIgmpGroupStaticIfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.60.1.2.2.7.1.50

zxAnIgmpMgmtGroupForwardingTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.2.9 · 1 row entry · 5 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpMgmtGroupForwardingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpMgmtGroupForwardingTable' 
A table that contains multicast forwarding port list 
information.
zxAnIgmpMgmtGroupForwardingEntry row .1.3.6.1.4.1.3902.1082.60.1.2.2.9.1
A list of entries of zxAnIgmpMgmtGroupForwardingTable. This table is not supported in C6XX.
Indexes
Column Syntax OID
zxAnIgmpGroupIpAddr
Multicast group IP Address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1082.60.1.2.2.9.1.1
zxAnIgmpSourceIpAddr
Multicast source IP Address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1082.60.1.2.2.9.1.2
zxAnIgmpShelf
The shelf that contains the port list.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.60.1.2.2.9.1.3
zxAnIgmpSlot
The slot that contains the port list.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.60.1.2.2.9.1.4
zxAnIgmpGroupForwardingPortList
The forwarding port list on a line card.
In GPON, the forwarding port is PON interface.
ZTE-AN-TC-MIBZxAnPortList
Description:
ZxAnPortList reprensents a map of ports. It uses a complex coding
to construct a OCTET STRING.
ZxAnPortList is consisted of many physical port units. Each port
unit is the type of OCTET STRING which including some bi…
 .1.3.6.1.4.1.3902.1082.60.1.2.2.9.1.6

zxAnIgmpMgmtGroupUserTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.2.10 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpMgmtGroupUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpMgmtGroupUserTable' 
A table that contains dynamic group user information.
zxAnIgmpMgmtGroupUserEntry row .1.3.6.1.4.1.3902.1082.60.1.2.2.10.1
A list of entries of zxAnIgmpMgmtGroupUserTable.
Indexes
Column Syntax OID
zxAnIgmpUserMacAddr
The user MAC address which is tracked from the IGMP request
packets sent by user device.
Note that zxAnIgmpUserTrackEnable must be enabled firstly,
otherwise the user MAC address will be ALL-ZERO.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1082.60.1.2.2.10.1.1
zxAnIgmpUserIpAddr
The user IP address which is tracked from the IGMP request
packets sent by user device.
Note that zxAnIgmpUserTrackEnable must be enabled firstly,
otherwise the user IP address will be ALL-ZERO.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1082.60.1.2.2.10.1.2
zxAnIgmpGrpUserSrcFilterMode
IGMPv3 source filter mode of the group user.
Enumeration
Enumerated Values:
1include
2exclude
 .1.3.6.1.4.1.3902.1082.60.1.2.2.10.1.3

zxAnIgmpMgmtGroupPrejoinTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.2.11 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpMgmtGroupPrejoinTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpMgmtGroupPrejoinTable' 
A table used to add or delete multicast group prejoin 
configuration.
zxAnIgmpMgmtGroupPrejoinEntry row .1.3.6.1.4.1.3902.1082.60.1.2.2.11.1
A list of entries of zxAnIgmpMgmtGroupPrejoinTable.
Indexes
Column Syntax OID
zxAnIgmpGroupPrejoinRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.60.1.2.2.11.1.50

zxAnIgmpMgmtGroupConfTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.2.12 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpMgmtGroupConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpMgmtGroupConfTable' 
A table used to configure multicast group information.
zxAnIgmpMgmtGroupConfEntry row .1.3.6.1.4.1.3902.1082.60.1.2.2.12.1
A list of entries of zxAnIgmpMgmtGroupConfTable.
Indexes
Column Syntax OID
zxAnIgmpGroupBandwidth
Multicast group bandwidth.
kbpsInteger32r/w
Constraints:
range: 100-65535
 .1.3.6.1.4.1.3902.1082.60.1.2.2.12.1.1
zxAnIgmpGroupConfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.60.1.2.2.12.1.50

zxAnIgmpMgmtSpanVlanTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.2.15 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpMgmtSpanVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpMgmtSpanVlanTable' 
A table that contains IGMP span VLAN information for VLANs. 
IGMP packets of this SVLAN will be processed.
zxAnIgmpMgmtSpanVlanEntry row .1.3.6.1.4.1.3902.1082.60.1.2.2.15.1
An entries of zxAnIgmpMgmtSpanVlanTable.
Indexes
Column Syntax OID
zxAnIgmpMgmtSpanVid
Vlan ID.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
Description:
A 12-bit VLAN ID used in the VLAN Tag header.
 .1.3.6.1.4.1.3902.1082.60.1.2.2.15.1.1
zxAnIgmpSpanVlanRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.60.1.2.2.15.1.50

zxAnIgmpMgmtMVlanPortListIITable

table
.1.3.6.1.4.1.3902.1082.60.1.2.2.18 · 1 row entry · 6 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpMgmtMVlanPortListIITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpMgmtMVlanPortListIITable' 
Multicast receiving ports list table.
zxAnIgmpMgmtMVlanPortListIIEntry row .1.3.6.1.4.1.3902.1082.60.1.2.2.18.1
Multicast receiving ports list entry.
Indexes
Column Syntax OID
zxAnIgmpMgmtMVlanPortListIIRack
The rack that contains the port list.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.60.1.2.2.18.1.1
zxAnIgmpMgmtMVlanPortListIIShelf
The shelf that contains the port list.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.60.1.2.2.18.1.2
zxAnIgmpMgmtMVlanPortListIISlot
The slot that contains the port list.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.60.1.2.2.18.1.3
zxAnIgmpMgmtMVlanPortListIIPort
The port that contains the port list.
Value 0 means non-PON port, other values means EPON/GPON port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.60.1.2.2.18.1.4
zxAnIgmpMgmtMVlanPortListIISeg
The segment of ONU that contains the port list.
The segment will range from 1 to 16 when the port is EPON/GPON
port.
The segment will be always 1 when the port is non-PON port.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.3902.1082.60.1.2.2.18.1.5
zxAnIgmpMgmtMVlanRecvPortListII
The receiving port list in the MVLAN.
ZTE-AN-TC-MIBZxAnPortList
Description:
ZxAnPortList reprensents a map of ports. It uses a complex coding
to construct a OCTET STRING.
ZxAnPortList is consisted of many physical port units. Each port
unit is the type of OCTET STRING which including some bi…
 .1.3.6.1.4.1.3902.1082.60.1.2.2.18.1.6

zxAnIgmpLogServerTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.4.2 · 1 row entry · 9 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpLogServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpLogServerTable' 
IGMP log servers table.
zxAnIgmpLogServerEntry row .1.3.6.1.4.1.3902.1082.60.1.2.4.2.1
IGMP log servers entry.
Indexes
Column Syntax OID
zxAnIgmpLogServerIpAddrType
IGMP log server IP address type.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1082.60.1.2.4.2.1.1
zxAnIgmpLogServerIpAddr
IGMP log server IP address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1082.60.1.2.4.2.1.2
zxAnIgmpLogServerUserName
IGMP log server user name.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.60.1.2.4.2.1.3
zxAnIgmpLogServerPassword
IGMP log server password.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.60.1.2.4.2.1.4
zxAnIgmpLogServerFtpType
IGMP log server protocol type.
Enumerationr/w
Enumerated Values:
1ftp
2sftp
 .1.3.6.1.4.1.3902.1082.60.1.2.4.2.1.5
zxAnIgmpLogVrfName
The VRF name.
When set this variable, an empty string is not supported.
When get this variable, always return an empty string.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.60.1.2.4.2.1.6
zxAnIgmpLogHostIpAddrType
Host IP address type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1082.60.1.2.4.2.1.7
zxAnIgmpLogHostIpAddr
Host IP address.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1082.60.1.2.4.2.1.8
zxAnIgmpLogServerRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.60.1.2.4.2.1.50

zxAnIgmpPktStatsTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.50.2 · 1 row entry · 24 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpPktStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpPktStatsTable' 
A table that contains IGMP packet statistics information.
zxAnIgmpPktStatsEntry row .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1
When query IGMP global statistics, all index must be zero.

When query IGMP statistics of a specific MVLAN, ifIndex and
zxAnSubIfIndex must be zero.

When query IGMP statistics of a …
Indexes
Column Syntax OID
zxAnIgmpPktStatsRxCommQry
The counter of IGMP general query message received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.1
zxAnIgmpPktStatsRxSpecialQry
The counter of IGMP special query message received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.2
zxAnIgmpPktStatsRxV1Report
The counter of IGMP v1 report message received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.3
zxAnIgmpPktStatsRxV2Report
The counter of IGMP v2 report message received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.4
zxAnIgmpPktStatsRxV3Report
The counter of IGMP v3 report message received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.5
zxAnIgmpPktStatsRxLeave
The counter of IGMP leave message received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.6
zxAnIgmpPktStatsRxError
The counter of IGMP error message received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.7
zxAnIgmpPktStatsRxUnknown
The counter of IGMP unknown message received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.8
zxAnIgmpPktStatsTxCommQry
The counter of IGMP general query message transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.9
zxAnIgmpPktStatsTxSpecialQry
The counter of IGMP special query message transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.10
zxAnIgmpPktStatsTxV1Report
The counter of IGMP v1 report message transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.11
zxAnIgmpPktStatsTxV2Report
The counter of IGMP v2 report message transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.12
zxAnIgmpPktStatsTxV3Report
The counter of IGMP v3 report message transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.13
zxAnIgmpPktStatsTxLeave
The counter of IGMP leave message transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.14
zxAnIgmpPktStatsDropRxCommQry
The counter of IGMP general query message dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.15
zxAnIgmpPktStatsDropRxSpeQry
The counter of IGMP special query message dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.16
zxAnIgmpPktStatsDropRxV1Report
The counter of IGMP v1 report message dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.17
zxAnIgmpPktStatsDropRxV2Report
The counter of IGMP v2 report message dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.18
zxAnIgmpPktStatsDropRxV3Report
The counter of IGMP v3 report message dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.19
zxAnIgmpPktStatsDropRxLeave
The counter of IGMP leave message dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.20
zxAnIgmpPktStatsDropRxUnknown
The counter of IGMP unknown message dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.21
zxAnIgmpPktStatsJoinSuccess
The counter of successful IGMP joins.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.22
zxAnIgmpPktStatsJoinFailure
The counter of failure IGMP joins.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.23
zxAnIgmpPktStatsReset
The action object to reset the statistics values.
When reset the statistics, it must be set to '1', associated
with corresponding index.
When be queried, it always returns '0'.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.3902.1082.60.1.2.50.2.1.100

zxAnIgmpIfStatsTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.50.3 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpIfStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpIfStatsTable' 
A table that contains IGMP group statistics information of an 
user interface.
zxAnIgmpIfStatsEntry row .1.3.6.1.4.1.3902.1082.60.1.2.50.3.1
An entry for zxAnIgmpIfStatsTable.
Indexes
Column Syntax OID
zxAnIgmpIfCurrActGroups
The active multicast group number on this interface.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.3.1.1

zxAnIgmpMVlanStatsTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.50.4 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpMVlanStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpMVlanStatsTable' 
A table that contains IGMP group statistics information in a 
MVLAN.
zxAnIgmpMVlanStatsEntry row .1.3.6.1.4.1.3902.1082.60.1.2.50.4.1
An entry for zxAnIgmpMVlanStatsTable.
Indexes
Column Syntax OID
zxAnIgmpMVlanCurrActGroups
The active multicast group number in the MVLAN.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.60.1.2.50.4.1.1

zxAnIgmpGroupStatsTable

table
.1.3.6.1.4.1.3902.1082.60.1.2.50.5 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnIgmpGroupStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-IGMP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-IGMP-MIB::zxAnIgmpGroupStatsTable' 
A table that contains interface statistics information in a 
multicast group.
zxAnIgmpGroupStatsEntry row .1.3.6.1.4.1.3902.1082.60.1.2.50.5.1
A list of entries of zxAnIgmpGroupStatsTable.
Indexes
Column Syntax OID
zxAnIgmpGroupActiveUsers
Number of active users associated with specified multicast group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.60.1.2.50.5.1.1