ZTE-AN-IEEE1588-MIB Table View

The IEEE 1588 PTP port table.

zxAnPtpIfConfEntry row .1.3.6.1.4.1.3902.1082.120.15.2.1.7.1

The IEEE 1588 PTP port entry.

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAnPtpIfConfClockId The PTP port clock identity. This attribute value is hexadecimal data.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.1
zxAnPtpIfConfNumber The PTP port number.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.2
zxAnPtpIfConfState The PTP port state.	Enumeration Enumerated Values: 1 initializing 2 faulty 3 disabled 4 listening 5 preMaster 6 master 7 passive 8 uncalibrated 9 slave	.1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.3
zxAnPtpIfConfMinDelayReqInterval The minimum interval between successive Delay_Req messages. us31250 means interval 2**(-5)s us62500 means interval 2**(-4)s us125000 means interval 2**(-3)s us250000 means interval 2**(-2)s us500000 means interval 2**(-…	Enumeration Enumerated Values: 1 us31250 2 us62500 3 us125000 4 us250000 5 us500000 6 oneSecond	.1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.4
zxAnPtpIfConfAnnounceInterval The interval between successive Announce messages. us31250 means interval 2**(-5)s us62500 means interval 2**(-4)s us125000 means interval 2**(-3)s us250000 means interval 2**(-2)s us500000 means interval 2**(-1)s oneSe…	Enumerationr/w Enumerated Values: 1 us31250 2 us62500 3 us125000 4 us250000 5 us500000 6 oneSecond	.1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.6
zxAnPtpIfConfMaxLossAnnounceMsgs The maximum number of Announce messages loss.	Integer32r/w Constraints: range: 2-255	.1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.7
zxAnPtpIfConfSyncInterval The interval between successive synchronization messages. us31250 means interval 2**(-5)s us62500 means interval 2**(-4)s us125000 means interval 2**(-3)s us250000 means interval 2**(-2)s us500000 means interval 2**(-1)…	Enumerationr/w Enumerated Values: 1 us31250 2 us62500 3 us125000 4 us250000 5 us500000 6 oneSecond	.1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.8
zxAnPtpIfConfLocalPriority The PTP port local priority.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.13
zxAnPtpIfConfPtpMsgProtocolType The PTP message protocol type. ipv4(1): it means the PTP messages is IPv4 protocol. ethernet(2): it means the PTP messages is Ethernet protocol.	Enumerationr/w Enumerated Values: 1 ipv4 2 ethernet	.1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.21
zxAnPtpIfConfAddressType The PTP port address type. multicast(1): it means the PTP port address type is multicast. unicast(2): it means the PTP port address type is unicast.	Enumerationr/w Enumerated Values: 1 multicast 2 unicast	.1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.22
zxAnPtpIfConfMsgForwardOption The PTP message forwarding option. forwardable(1): it means the PTP messages is preferable to forward the PTP messages through the PTP port. nonforwardable(2): it means the PTP messages must never be …	Enumerationr/w Enumerated Values: 1 forwardable 2 nonforwardable	.1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.23
zxAnPtpIfConfDelayCompensation The PTP port delay compensation.	NanosecondsInteger32r/w Constraints: range: -100000-100000	.1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.24
zxAnPtpIfConfAdminStatus The PTP port administrative status. Enables or disables the PTP port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.25
zxAnPtpIfConfRowStatus The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.50

The IEEE 1588 PTP profile table.

zxAnPtpPrfEntry row .1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1

The IEEE 1588 PTP profile entry.

Indexes

zxAnPtpPrfName

Column	Syntax	OID
zxAnPtpPrfName The PTP profile name.	SNMPv2-TCDisplayString Constraints: range: 1-40 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.1
zxAnPtpPrfPriority2 The PTP priority 2. The value 0 indicates the highest priority.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.3
zxAnPtpPrfDomainNumber The PTP domain number.	Integer32r/w Constraints: range: 24-43	.1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.4
zxAnPtpPrfLocalPriority The PTP local priority. The value 1 indicates the highest priority.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.5
zxAnPtpPrfMaxStepsRemoved The PTP maximum steps removed. The parameter is defined in [IEEE1588] is used to indicate the distance between a clock and the grandmaster clock in the network. It was originally intended to be used as a helpful tool t…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.6
zxAnPtpPrfBmcaOption The PTP BMCA (best master clock algorithm) option. g82751(1): BMCA complies with G.8275.1. ieee1588(2): BMCA complies with IEEE 1588.	Enumerationr/w Enumerated Values: 1 g82751 2 ieee1588	.1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.7
zxAnPtpPrfTraceOption The PTP trace option. g82751(1): PTP trace complies with G.8275.1. g82751note3(2): PTP trace complies with G.8275.1 note 3. ieee1588(3): PTP trace complies with IEEE 1588.	Enumerationr/w Enumerated Values: 1 g82751 2 g82751note3 3 ieee1588	.1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.8
zxAnPtpPrfHoldoverInTimeout The holdover-in timeout. The value 0 indicates that the system clock do not enter into the holdover-in status.	MinutesInteger32r/w Constraints: range: 0-1440	.1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.9
zxAnPtpPrfRowStatus The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.50

The IEEE 1588 PTP port statistics table.

zxAnPtpIfStatsEntry row .1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1

The IEEE 1588 PTP port statistics entry.

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAnPtpIfStatsAnnounceMsgs The number of PTP announce messages.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.1
zxAnPtpIfStatsSyncMsgs The number of PTP synchronization messages.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.2
zxAnPtpIfStatsDelayReqMsgs The number of PTP delay_req messages.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.3
zxAnPtpIfStatsDelayRespMsgs The number of PTP delay_resp messages.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.4
zxAnPtpIfStatsFollowUpMsgs The number of PTP follow_up messages.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.5

This table includes 1PPS source information in NE 
equipment.

zxAnSyncTime1ppsSrcEntry row .1.3.6.1.4.1.3902.1082.120.15.2.2.3.1

An entry in zxAnSyncTime1ppsSrcTable.
to create a 1pps source,it must comply with the multi-variables
usage rule - all the mib variables related to same fuction
must be in one snmp set operation.
the variables have two…

Indexes

zxAnSyncTime1ppsSrcId

Column	Syntax	OID
zxAnSyncTime1ppsSrcId This '1PPS+ToD' source id.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.1
zxAnSyncTime1ppsSrcRack This object indicates the rack number.	Integer32r/w Constraints: range: 1-1	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.2
zxAnSyncTime1ppsSrcShelf This object indicates the shelf number.	Integer32r/w Constraints: range: 1-1	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.3
zxAnSyncTime1ppsSrcSlot This object indicates the slot number. Only support time card, such as cick.	Integer32r/w Constraints: range: 1-22	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.4
zxAnSyncTime1ppsSrcFirstPtp The PTP node provided '1PPS+ToD' siginal is the first node of this slot or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.5
zxAnSyncTime1ppsSrcSignalType The type of '1PPS+ToD' signal source. ptp(1) : 1PPS come from PTP onepps(2) : 1PPS come from physical 1pps port	Enumerationr/w Enumerated Values: 1 ptp 2 onepps	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.6
zxAnSyncTime1ppsSrcPriority The priority of '1PPS+ToD' signal source, value 1 is the highest priority.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.7
zxAnSyncTime1ppsSrcPortType The '1PPS+ToD' signal source port type. It is valid only for the 'onepps' signal type. typeTtl(1) : physical port type TTL type422(2) : from physical port as RJ45	Enumerationr/w Enumerated Values: 1 typeTtl 2 type422	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.8
zxAnSyncTime1ppsSrcPort The physical port number. It is valid only for the 'onepps' signal type.	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.9
zxAnSyncTime1ppsSrcWorkStatus The '1PPS+ToD' signal source work status, none(1) : indicates PTP source is invalid. active(2) : indicates PTP source is active, standby(3) : indicates PTP source is standby source,	Enumeration Enumerated Values: 1 none 2 active 3 standby	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.10
zxAnSyncTime1ppsSrcValidStatus The '1PPS+ToD' singnal source work status. valid(1) : indicates the 1PPS signal is valid invalid(2): indicates the 1PPS signal is invalid When the value is invalid, then zxAnSyncTime1ppsSrcWorkStatus is none.	Enumeration Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.11
zxAnSyncTime1ppsSrcPortStatus The '1PPS+ToD' signal source port status. It is valid only for the 'onepps' signal type. If zxAnSyncTime1ppsSrcSignalType is 'ptp', then the value is none. When the value is none or signalLos, then zxAnSyncTime1ppsSr…	Enumeration Enumerated Values: 1 none 2 normal 3 signalLos	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.12
zxAnSyncTime1ppsSrcFormat The '1PPS+ToD' singnal source format. unknown(1): it indicates the '1PPS+ToD' signal source format is unknown. gpzda(2): it indicates the '1PPS+ToD' signal source format is GPZDA. gprmc(3): it indi…	Enumeration Enumerated Values: 1 unknown 2 gpzda 3 gprmc 4 cmcc	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.13
zxAnSyncTime1ppsSrcCurrentQL The '1PPS+ToD' singnal source current quality level. locked(1): 1PPS input signal source is locked with grandmaster at this time. qlprc(2): quality level of primary reference clock, it is defined…	Enumeration Enumerated Values: 1 locked 2 qlprc 4 qlssua 8 qlssub 11 qlsec 15 qldnu	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.14
zxAnSyncTime1ppsSrcTimeAccuracy The '1PPS+ToD' singnal source time accuracy, value 0 indicates the highest accuracy.	NanosecondsInteger32 Constraints: range: 0-3810	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.15
zxAnSyncTime1ppsSrcTimeSrcType The '1PPS+ToD' singnal source time source type. bds(1): the time source type is beidou bavigation satellite system. gps(2): the time source type is global positioning system. ptp(3): the time source type is prec…	Enumeration Enumerated Values: 1 bds 2 gps 3 ptp 255 other	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.16
zxAnSyncTime1ppsSrcDlyCompensate The '1PPS+ToD' delay compensation.	NanosecondsInteger32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.17
zxAnSyncTime1ppsSrcRowStatus The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.30

This table includes TOD source information in NE 
equipment.

zxAnSyncTimeTodSrcEntry row .1.3.6.1.4.1.3902.1082.120.15.2.2.4.1

An entry in zxAnSyncTimeTodSrcTable.
to create a TOD source,it must comply with the multi-variables
usage rule - all the mib variables related to same fuction
must be in one snmp set operation.
the variables have two t…

Indexes

zxAnSyncTimeTodSrcId

Column	Syntax	OID
zxAnSyncTimeTodSrcId This tod source id.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.1
zxAnSyncTimeTodSrcRack This object indicates the rack number.	Integer32r/w Constraints: range: 1-1	.1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.2
zxAnSyncTimeTodSrcShelf This object indicates the shelf number.	Integer32r/w Constraints: range: 1-1	.1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.3
zxAnSyncTimeTodSrcSlot This object indicates the slot number. Only support time card, such as cick.	Integer32r/w Constraints: range: 1-22	.1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.4
zxAnSyncTimeTodSrcPort This object indicates the port number.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.5
zxAnSyncTimeTodSrcSignalType The signal type of TOD signal source. gps(1) : GPS TOD form chinaMobile(2) : China Mobile Telecom's TOD form chinaUnicom(3) : China Unicom Telecom's TOD form chinaTelecom(4): China Telecom's TOD form	Enumerationr/w Enumerated Values: 1 gps 2 chinaMobile 3 chinaUnicom 4 chinaTelecom	.1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.6
zxAnSyncTimeTodSrcYearAdjust The year adjustment value of TOD signal source. It is valid only for the 'gps' signal type.	yearInteger32r/w Constraints: range: 0-2050	.1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.7
zxAnSyncTimeTodSrcPortStatus The TOD signal source port status. none(1) : none normal(2) : no alarm signalLos(3) : Loss of TOD	Enumeration Enumerated Values: 1 none 2 normal 3 signalLos	.1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.8
zxAnSyncTimeTodSrcRowStatus The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.30

This table includes 1PPS and TOD signal output ports 
information in NE equipment.

zxAnSyncTimeOutputPortEntry row .1.3.6.1.4.1.3902.1082.120.15.2.2.5.1

An entry in zxAnSyncTimeOutputPortTable.
to create a TOD output,it must comply with the multi-variables
usage rule - all the mib variables related to same fuction
must be in one snmp set operation.
the variables have t…

Indexes

zxAnSyncTimeOutputId

Column	Syntax	OID
zxAnSyncTimeOutputId This time output id.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.1
zxAnSyncTimeOutputRack This object indicates the rack number.	Integer32r/w Constraints: range: 1-1	.1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.2
zxAnSyncTimeOutputShelf This object indicates the shelf number.	Integer32r/w Constraints: range: 1-1	.1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.3
zxAnSyncTimeOutputSlot This object indicates the slot number. Only support pon card.	Integer32r/w Constraints: range: 1-22	.1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.4
zxAnSyncTimeOutputPort This object indicates the port number.	Integer32r/w Constraints: range: 1-8	.1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.5
zxAnSyncTimeOutputPortEnable Enables or disables the output port of 1PPS and TOD signal. enable(1) : enable disable(2): disable	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.6
zxAnSyncTimeOutputPortPhaseAdjus The phase adjustment value. It is valid only for the 1PPS signal.	nsInteger32r/w Constraints: range: -1000000-1000000	.1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.7
zxAnSyncTimeOutputPortRowStatus The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.30