ZTE-AN-ARP-MIB Table View

This table provides the mechanism to control ARP anti-spoofing 
per VLAN. When a VLAN is created in a device supporting this 
table, a corresponding entry of this table will be added. 
             
If the VLAN number on which ARP anti-spoofing at this interface
and ARP anti-spoofing at this interface are both enabled,the 
ARP requests or ARP responses whose IP-MAC assignment is not 
compliant, and for which there is therefore no matching entry 
in the DHCP Snooping Table, they must be rejected.

zxAnArpAntiSpoofingVlanEntry row .1.3.6.1.4.1.3902.1082.70.45.2.1.2.1

A row instance contains the configuration to enable or disable
ARP anti-spoofing at each existing VLAN.

Indexes

zxAnArpAntiSpoofingVid

Column	Syntax	OID
zxAnArpAntiSpoofingVid This object indicates the VLAN number on which ARP anti-spoofing feature is configured. If the VLAN number on which ARP anti-spoofing at this interface and ARP anti-spoofing at this interface are bot…	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.3902.1082.70.45.2.1.2.1.1
zxAnArpAntiSpoofingVlanDirection Direction of ARP anti-Spoofing.	Enumerationr/w Enumerated Values: 1 downstream 2 upstream 3 both	.1.3.6.1.4.1.3902.1082.70.45.2.1.2.1.2
zxAnArpAntiSpoofingVlanRowStatus This object is used to manage the creation and deletion of rows in this table. It only supports 'active(1)','createAndGo(4)'and 'destroy(6)' value. If this object is set to 'createAndGo(4)', the vlan…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.70.45.2.1.2.1.50

This table provides the mechanism to control ARP reply agent 
per VLAN. When a VLAN is created in a device supporting this 
table, a corresponding entry of this table will be added. 
             
If the VLAN number on which ARP reply agent at this interface
and ARP reply agent at this interface are both enabled, The 
ARP Reply Agent must respond to ARP queries received from 
the network.

zxAnArpReplyAgentVlanEntry row .1.3.6.1.4.1.3902.1082.70.45.2.2.2.1

A row instance contains the configuration to enable or disable
ARP reply agent at each existing VLAN.

Indexes

zxAnArpReplyAgentVid

Column	Syntax	OID
zxAnArpReplyAgentVid This object indicates the VLAN number on which ARP reply agent feature is configured. If the VLAN number on which ARP reply agent at this interface and ARP reply agent at this interface are both ena…	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.3902.1082.70.45.2.2.2.1.1
zxAnArpReplyAgentVlanRowStatus This object is used to manage the creation and deletion of rows in this table. It only supports 'active(1)','createAndGo(4)'and 'destroy(6)' value. If this object is set to 'createAndGo(4)', the vlan…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.70.45.2.2.2.1.50

This table indicates MFF configuration.MFF is MAC-Forced 
Forwarding.This table supports 32 VLAN's configuration of the 
MFF gateway,and 8 gateway configuration per vlan.In a same VLAN,
IP or MAC of the gateway should not be duplicated.

zxAnArpMffEntry row .1.3.6.1.4.1.3902.1082.70.45.2.3.2.1

A row instance contains the configuration to enable or disable
MFF at each existing VLAN.

Indexes

zxAnArpMffVid zxAnArpMffGatewayIpAddr

Column	Syntax	OID
zxAnArpMffVid An index for zxAnArpMffTable.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.3902.1082.70.45.2.3.2.1.1
zxAnArpMffGatewayIpAddr MFF gateway IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3902.1082.70.45.2.3.2.1.2
zxAnArpMffGatewayIpMask MFF gateway IP mask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.3902.1082.70.45.2.3.2.1.3
zxAnArpMffGatewayMac MFF gateway MAC address. A 0 value of this variable indicates no configure.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.1082.70.45.2.3.2.1.4
zxAnArpMffGatewayMacConfMode MFF gateway MAC address configuration mode. If zxAnArpMffGatewayMac has been configured, the mode should be manual when doing a request, otherwise, the mode should be automatic.	Enumeration Enumerated Values: 1 manual 2 automatic	.1.3.6.1.4.1.3902.1082.70.45.2.3.2.1.5
zxAnArpMffRowStatus This object is used to manage the creation and deletion of rows in this table. It only supports 'active(1)','createAndGo(4)'and 'destroy(6)' value. If this object is set to 'createAndGo(4)', the VLAN…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.70.45.2.3.2.1.50

ARP filter table based on VLAN.
If the VLAN item is set, the NE will dispatch the ARP 
packets downward by check the out port strictly.

zxAnArpFilterVlanConfEntry row .1.3.6.1.4.1.3902.1082.70.45.2.4.2.1

An entry in zxAnArpFilterVlanConfTable.

Indexes

zxAnArpFilterVlanConfVid

Column	Syntax	OID
zxAnArpFilterVlanConfVid This object indicates the VLAN ID on which ARP filter feature is configured.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.3902.1082.70.45.2.4.2.1.1
zxAnArpFilterVlanConfRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.70.45.2.4.2.1.50