ZTE-AN-ACL-MIB Table View

Table-centric layout grouping table, row, and column objects.

MIB version

Standard view Table view

Tables

Rows

Columns

106

zxAnAclTable

table

.1.3.6.1.4.1.3902.1082.70.15.2.2.2 · 1 row entry · 3 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxAnAclTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclTable'

This table represents the ACL related parameters.

zxAnAclEntry row .1.3.6.1.4.1.3902.1082.70.15.2.2.2.1

An entry in zxAnAclTable.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP set o…

Indexes

zxAnAclNumber

Column Syntax OID

zxAnAclNumber

The number of an ACL.
When unifiedTypeAcl(2) bit of zxAnAclCapabilities is 0:
range 1-99 - standard ACL.
range 100-199 - extended ACL.
range 200-299 - link ACL.
range 300-399 - hybrid ACL.
ra…

Integer32

Constraints:
range: 1-699

.1.3.6.1.4.1.3902.1082.70.15.2.2.2.1.1

zxAnAclName

The name of an ACL.
The first element (excluding plus & minus) in an ACL name
should not be a number.
You can't make the same name to different ACLs.
It's not necessary to create an ACL entry.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-32

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.1082.70.15.2.2.2.1.2

zxAnAclRowStatus

The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.3902.1082.70.15.2.2.2.1.50

zxAnAclStandardRuleTable

table

.1.3.6.1.4.1.3902.1082.70.15.2.2.3 · 1 row entry · 8 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxAnAclStandardRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclStandardRuleTable'

Acl standard rule table.                
Provide acl standard rule configuration.

zxAnAclStandardRuleEntry row .1.3.6.1.4.1.3902.1082.70.15.2.2.3.1

An entry in zxAnAclStandardRuleTable.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in o…

Indexes

zxAnAclStdAclNumber zxAnAclStdRuleId

Column Syntax OID

zxAnAclStdAclNumber

The number of a standard Acl.

Integer32

Constraints:
range: 1-99

.1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.1

zxAnAclStdRuleId

The index of a rule within a standard Acl.

Integer32

Constraints:
range: 1-127

.1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.2

zxAnAclStdRuleAccessCtrl

Specify packets to be rejected or to be forwarded.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.3

zxAnAclStdRuleSrcIpType

The type of IP address used by this rule entry.

INET-ADDRESS-MIBInetAddressTyper/w

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.4

zxAnAclStdRuleSrcIp

The source IP address to be matched for this rule.
A value of zero causes all source address to match.
The object value has to be consistent
with the type specified in zxAnAclStdRuleSrcIpType.

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.5

zxAnAclStdRuleSrcIpMask

This is the wildcard mask for the zxAnAclStdRuleSrcIp bits
that must match. 0 bits in the mask indicate the corresponding
bits in the zxAnAclStdRuleSrcIp must match in order for the
matching to be successful, and 1 b…

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.6

zxAnAclStdRuleTimeRangeName

Name of the time range.
Empty string means all the time the rule is valid.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-32

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.45

zxAnAclStdRuleRowStatus

The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.50

zxAnAclHybridRuleTable

table

.1.3.6.1.4.1.3902.1082.70.15.2.2.6 · 1 row entry · 34 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxAnAclHybridRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclHybridRuleTable'

Acl hybrid rule table.                
Provide acl hybrid rule configuration.

zxAnAclHybridRuleEntry row .1.3.6.1.4.1.3902.1082.70.15.2.2.6.1

An entry in zxAnAclHybridRuleTable.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one …

Indexes

zxAnAclHybridAclNumber zxAnAclHybridRuleId

Column Syntax OID

zxAnAclHybridAclNumber

The number of a hybrid Acl.

Integer32

Constraints:
range: 300-399

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.1

zxAnAclHybridRuleId

The index of a rule within a hybrid Acl

Integer32

Constraints:
range: 1-127

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.2

zxAnAclHybridRuleAccessCtrl

Specify packets to be rejected or to be forwarded.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.3

zxAnAclHybridRuleSrcIpType

The type of source IP address used by this rule entry.

INET-ADDRESS-MIBInetAddressTyper/w

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.4

zxAnAclHybridRuleSrcIp

The source IP address to be matched against for this rule.
A zero value of this variable and a 0xFFFFFF value of variable
zxAnAclHybridRuleSrcIpMask causes all source address to match.
The object value has to be consi…

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.5

zxAnAclHybridRuleSrcIpMask

This is the wildcard mask for the zxAnAclStdRuleSrcIp bits that
must match.0 bits in the mask indicate the corresponding bits in
the zxAnAclHybridRuleSrcIp must match in order for the matching
to be successful, and 1 b…

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.6

zxAnAclHybridRuleDestIpType

The type of destination IP address used by this rule entry.

INET-ADDRESS-MIBInetAddressTyper/w

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.8

zxAnAclHybridRuleDestIp

The destination IP address to be matched against for this rule.
A zero value of this variable and a 0xFFFFFF value of variable
zxAnAclHybridRuleDestIpMask causes all destination address to match.
The object value has …

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.9

zxAnAclHybridRuleDestIpMask

This is the wildcard mask for the zxAnAclHybridRuleDestIp bits
that must match. 0 bits in the mask indicate the corresponding
bits in the zxAnAclHybridRuleDestIp must match in order for the
matching to be successful, …

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.10

zxAnAclHybridRuleIpProto

The protocol number field in the IP header used to indicate the
higher layer protocol as specified in RFC 1700.A value of '0xFF'
matches every IP packet.

For example :
255 is any, 1 is ICMP, 2 is IGMP, 4 …

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.12

zxAnAclHybridRuleEthProto

This 16-bit number indicates the matched Ethernet type.
0xFFFF means any Ethernet type will be matched.

Integer32r/w

Constraints:
range: 1537-65535

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.13

zxAnAclHybridRuleSrcPortOper

Indicates how a packet's source TCP/UDP port number is to
be compared.

If the zxAnAclHybridRuleIpProto object in the same row does not
indicate TCP or UDP, this object has to be 'none(1)' and cannot
be…

ZxAnAclPortOperatorr/w

Type Values:

1	none
2	eq
3	ge
4	le
5	range

Description:

Indicates how a packet's TCP/UDP port number is
to be compared.
none(1) means that no comparison is to be made with
the TCP/UDP port number.

eq(2) means equal, ge(3) means greater than or equal,
le(4) mean…

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.14

zxAnAclHybridRuleStartSrcPort

The source port number of the TCP or UDP protocol. If the
zxAnAclHybridRuleSrcPortOper object in the same row is range(5),
this object will be the starting port number of the port range.
This object cannot be configure…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.15

zxAnAclHybridRuleEndSrcPort

The source port number of the TCP or UDP protocol. If the
zxAnAclHybridRuleSrcPortOper object in the same row is range(5),
this object will be the ending port number of the port range.
This object cannot be configured…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.16

zxAnAclHybridRuleDestPortOper

Indicates how a packet's destination TCP/UDP port number is to
be compared.

If the zxAnAclHybridRuleIpProto object in the same row does not
indicate TCP or UDP, this object has to be 'none(1)' and canno…

ZxAnAclPortOperatorr/w

Type Values:

1	none
2	eq
3	ge
4	le
5	range

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.17

zxAnAclHybridRuleStartDestPort

The destination port number of the TCP or UDP protocol. If the
zxAnAclHybridRuleDestPortOper object in the same row is range(5),
this object will be the starting port number of the port range.
This object cannot be c…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.18

zxAnAclHybridRuleEndDestPort

The destination port number of the TCP or UDP protocol. If the
zxAnAclHybridRuleDestPortOper object in the same row is range(5),
this object will be the ending port number of the port range.
This object cannot be con…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.19

zxAnAclHybridRulePrecedence

Specifies the IP precedence value to be matched against.
Packets can be matched the IP precedence value from 0 to 7.
This object can't be configured simultaneously with
zxAnAclHybridRuleDscp. The value of this object …

Integer32r/w

Constraints:
range: 255-255
range: 0-7

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.20

zxAnAclHybridRuleTos

Specifies the Tos value to be matched against. Packets can
be matched the Tos value from 0 to 15. This object can't
be configured simultaneously with zxAnAclHybridRuleDscp.
The value of this object is ignored wheneve…

Integer32r/w

Constraints:
range: 255-255
range: 0-15

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.21

zxAnAclHybridRuleDscp

Specifies the Dscp value to be matched against.
Packets can be matched the DSCP level from 0 to 63.
This object can't be configured simultaneously with
zxAnAclHybridRuleTos and ZxAnAclHybridRulePrecedence.
The value …

Integer32r/w

Constraints:
range: 0-63
range: 255-255

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.22

zxAnAclHybridRuleStagCos

Indicates the packet Cos value to be matched. If there are two
tags in the packets, this object will be the Cos value in outer
tag.'0xFF' indicates no configure.

Integer32r/w

Constraints:
range: 255-255
range: 0-7

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.25

zxAnAclHybridRuleSVid

Indicates the packet VLAN number to be matched. If there are
two tags in the packets, this object will be the VLAN number in
outer tag.'0xFFFF' indicates no configure.

Integer32r/w

Constraints:
range: 65535-65535
range: 1-4090

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.26

zxAnAclHybridRuleCtagCos

Indicates the packet Cos value to be matched. If there are two
tags in the packets, this object will be the Cos value in inner
tag. The value of this object is ignored whenever there is only
one tag in the packets.'0…

Integer32r/w

Constraints:
range: 255-255
range: 0-7

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.27

zxAnAclHybridRuleCVid

Indicates the packet VLAN number to be matched. If there are two
tags in the packets, this object will be the VLAN number in inner
tag. The value of this object is ignored whenever there is only
one tag in the packet…

Integer32r/w

Constraints:
range: 65535-65535
range: 1-4090

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.28

zxAnAclHybridRuleSrcMac

The source MAC address to be matched against for this rule.
A 0 value of this variable and a 0xFFFFFFFFFFFF value of variable
zxAnAclHybridRuleSrcMacMask causes all source addresses to match.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.29

zxAnAclHybridRuleSrcMacMask

This is the wildcard mask for the zxAnAclHybridRuleSrcMac bits
that must match. 0 bits in the mask indicate the corresponding
bits in the zxAnAclHybridRuleSrcMac must match in order for the
matching to be successful,…

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.30

zxAnAclHybridRuleDestMac

The destination MAC address to be matched against for this rule.
A 0 value of this variable and a 0xFFFFFFFFFFFF value of variable
zxAnAclHybridRuleDestMacMask causes all destination addresses to
match.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.31

zxAnAclHybridRuleDestMacMask

This is the wildcard mask for the zxAnAclHybridRuleDestMac bits
that must match. 0 bits in the mask indicate the corresponding bits
in the zxAnAclHybridRuleDestMac must match in order for the matching
to be successfu…

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.32

zxAnAclHybridRuleStagTpid

Specifies the value which will be matched 802.1q TPID field.
If there are two vlan tags in the packet, this object will
be matched the field which in outer tag.
Value '0' indicates no configure.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.33

zxAnAclHybridRuleCtagTpid

Specifies the value which will be matched the inner TPID field
when there are two vlan tags.
Value '0' indicates no configure.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.34

zxAnAclHybridRuleItagTpid

Specifies the value which will be matched the 802.1ah
I-Tag TPID field.
Value '0' indicates no configure.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.35

zxAnAclHybridRuleIsid

Specifies the value which will be matched the 802.1ah I-SID field.
Value '0x7FFFFFFF' indicates no configure.

Integer32r/w

Constraints:
range: 2147483647-2147483647
range: 0-16777215

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.36

zxAnAclHybridRuleTimeRangeName

Name of the time range.
Empty string means all the time the rule is valid.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-32

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.45

zxAnAclHybridRuleRowStatus

The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.50

zxAnAclIpv6HybridRuleTable

table

.1.3.6.1.4.1.3902.1082.70.15.2.2.7 · 1 row entry · 41 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxAnAclIpv6HybridRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclIpv6HybridRuleTable'

ACL IPv6 rule table.                
Provide ACL hybrid rule configuration.

zxAnAclIpv6HybridRuleEntry row .1.3.6.1.4.1.3902.1082.70.15.2.2.7.1

An entry in zxAnAclIpv6HybridRuleEntry.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in …

Indexes

zxAnAclIpv6HybridAclNumber zxAnAclIpv6HybridRuleId

Column Syntax OID

zxAnAclIpv6HybridAclNumber

The number of an IPv6 hybrid ACL.

Integer32

Constraints:
range: 1-699

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.1

zxAnAclIpv6HybridRuleId

The index of a rule within an IPv6 hybrid ACL.

Integer32

Constraints:
range: 1-2147483644

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.2

zxAnAclIpv6HybridAccessCtrl

Specify packets to be rejected or to be forwarded.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.3

zxAnAclIpv6HybridSrcIpType

The type of source IP address used by this rule entry.

INET-ADDRESS-MIBInetAddressTyper/w

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.4

zxAnAclIpv6HybridSrcIp

The source IP address to be matched against for this rule.
The object value has to be consistent with the type specified in
zxAnAclIpv6HybridSrcIpType.

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.5

zxAnAclIpv6HybridSrcIpMask

This is the wildcard mask for the zxAnAclIpv6HybridSrcIp bits that
must match.0 bits in the mask indicate the corresponding bits in
the zxAnAclIpv6HybridSrcIp must match in order for the matching
to be successful, and …

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.6

zxAnAclIpv6HybridSrcIpPfxLen

Source IP address prefix length.
Only valid when zxAnAclIpv6HybridSrcIpType is ipv6.

INET-ADDRESS-MIBInetAddressPrefixLengthr/w

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.7

zxAnAclIpv6HybridDestIpType

The type of destination IP address used by this rule entry.

INET-ADDRESS-MIBInetAddressTyper/w

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.8

zxAnAclIpv6HybridDestIp

The destination IP address to be matched against for this rule.
The object value has to be consistent with the type specified in
zxAnAclIpv6HybridDestIpType.

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.9

zxAnAclIpv6HybridDestIpMask

This is the wildcard mask for the zxAnAclIpv6HybridDestIpMask bits
that must match. 0 bits in the mask indicate the corresponding
bits in the zxAnAclIpv6HybridDestIp must match in order for the
matching to be successf…

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.10

zxAnAclIpv6HybridDestIpPfxLen

Destination IP address prefix length.
Only valid when zxAnAclIpv6HybridDestIpType is ipv6.

INET-ADDRESS-MIBInetAddressPrefixLengthr/w

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.11

zxAnAclIpv6HybridIpProto

<0-254> An IP protocol number
icmpv6 Internet Control Message Protocol for Ipv6(58)
igmp Internet Group Management Protocol (2)
ospf Open Shortest Path First Protocol (89)
pim Pr…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.12

zxAnAclIpv6HybridEthProto

0xHHHH Ethernet protocol number
any Any ether protocol type
arp Address resolution protocol (2054)
ip Internet protocol (2048)

Integer32r/w

Constraints:
range: 1537-65535

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.13

zxAnAclIpv6HybridSrcPortOper

Indicates how a packet's source TCP/UDP port number is to
be compared.

If the zxAnAclIpv6HybridIpProto object in the same row does not
indicate TCP or UDP, this object has to be 'none(1)' and cannot
be…

ZxAnAclPortOperatorr/w

Type Values:

1	none
2	eq
3	ge
4	le
5	range

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.14

zxAnAclIpv6HybridStartSrcPort

The source port number of the TCP or UDP protocol. If the
zxAnAclIpv6HybridSrcPortOper object in the same row is range(5),
this object will be the starting port number of the port range.
This object cannot be configure…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.15

zxAnAclIpv6HybridEndSrcPort

The source port number of the TCP or UDP protocol. If the
zxAnAclIpv6HybridSrcPortOper object in the same row is range(5),
this object will be the ending port number of the port range.
This object cannot be configured…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.16

zxAnAclIpv6HybridDestPortOper

Indicates how a packet's destination TCP/UDP port number is to
be compared.

If the zxAnAclIpv6HybridIpProto object in the same row does not
indicate TCP or UDP, this object has to be 'none(1)' and canno…

ZxAnAclPortOperatorr/w

Type Values:

1	none
2	eq
3	ge
4	le
5	range

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.17

zxAnAclIpv6HybridStartDestPort

The destination port number of the TCP or UDP protocol. If the
zxAnAclIpv6HybridDestPortOper object in the same row is range(5),
this object will be the starting port number of the port range.
This object cannot be c…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.18

zxAnAclIpv6HybridEndDestPort

The destination port number of the TCP or UDP protocol. If the
zxAnAclIpv6HybridDestPortOper object in the same row is range(5),
this object will be the ending port number of the port range.
This object cannot be con…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.19

zxAnAclIpv6HybridPrecedence

Specifies the IP precedence value to be matched against.
Packets can be matched the IP precedence value from 0 to 7.
This object can't be configured simultaneously with
zxAnAclIpv6HybridDscp.
A value of '0xFF' indica…

Integer32r/w

Constraints:
range: 255-255
range: 0-7

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.20

zxAnAclIpv6HybridTos

Specifies the TOS value to be matched against. Packets can
be matched the TOS value from 0 to 15. This object can't
be configured simultaneously with zxAnAclIpv6HybridDscp.
A value of '0xFF' indicates not care about …

Integer32r/w

Constraints:
range: 255-255
range: 0-15

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.21

zxAnAclIpv6HybridDscp

Specifies the DSCP value to be matched against.
Packets can be matched the DSCP level from 0 to 63.
This object can't be configured simultaneously with
zxAnAclIpv6HybridTos and zxAnAclIpv6HybridPrecedence.
A value of…

Integer32r/w

Constraints:
range: 0-63
range: 255-255

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.22

zxAnAclIpv6HybridStagCos

Indicates the packet CoS value to be matched. If there are two
tags in the packets, this object will be the CoS value in outer
tag.
A value of '0xFF' indicates not care about this field.

Integer32r/w

Constraints:
range: 255-255
range: 0-7

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.23

zxAnAclIpv6HybridSVid

Indicates the packet VLAN number to be matched. If there are
two tags in the packets, this object will be the VLAN number in
outer tag.
A value of '0xFFFF' indicates not care about this field.

Integer32r/w

Constraints:
range: 65535-65535
range: 1-4094

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.24

zxAnAclIpv6HybridCtagCos

Indicates the packet CoS value to be matched. If there are two
tags in the packets, this object will be the CoS value in inner
tag. The value of this object is ignored whenever there is only
one tag in the packets.
A…

Integer32r/w

Constraints:
range: 255-255
range: 0-7

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.25

zxAnAclIpv6HybridCVid

Integer32r/w

Constraints:
range: 1-4094
range: 65535-65535

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.26

zxAnAclIpv6HybridSrcMac

The source MAC address to be matched against for this rule.
A 0 value of this variable and a 0xFFFFFFFFFFFF value of variable
zxAnAclIpv6HybridSrcMacMask indicates not care about this field.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.27

zxAnAclIpv6HybridSrcMacMask

This is the wildcard mask for the zxAnAclIpv6HybridSrcMac bits
that must match. 0 bits in the mask indicate the corresponding
bits in the zxAnAclIpv6HybridSrcMac must match in order for the
matching to be successful,…

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.28

zxAnAclIpv6HybridDestMac

The destination MAC address to be matched against for this rule.
A 0 value of this variable and a 0xFFFFFFFFFFFF value of variable
zxAnAclIpv6HybridDestMacMask indicates not care about this field.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.29

zxAnAclIpv6HybridDestMacMask

This is the wildcard mask for the zxAnAclIpv6HybridDestMac bits
that must match. 0 bits in the mask indicate the corresponding bits
in the zxAnAclIpv6HybridDestMac must match in order for the
matching to be successfu…

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.30

zxAnAclIpv6HybridTrafficClass

Traffic class field of IPv6.
65535 means unconfigured.

Integer32r/w

Constraints:
range: 65535-65535
range: 0-255

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.31

zxAnAclIpv6HybridFlowLabel

Flow label field of IPv6.
16777215(0xFFFFFF) means unconfigured.

Integer32r/w

Constraints:
range: 16777215-16777215
range: 0-1048575

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.32

zxAnAclIpv6HybridIcmpType

Specifies the ICMPv6 type value to be matched against.
A value of '0xFF' indicates not care about this field.
If the zxAnAclIpv6HybridIpProto object in the same row does not
indicate ICMPv6(58), or zxAnAclIpv6HybridIcm…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.33

zxAnAclIpv6HybridIcmpCode

Specifies the ICMPv6 code value to be matched against.
A value of '0xFF' indicates not care about this field.
If the zxAnAclIpv6HybridIpProto object in the same row does not
indicate ICMPv6(58), this object has to be '…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.34

zxAnAclIpv6HybridSrcIpGrpName

Name of the ACL rule parameter group for source IP.
Empty string means the rule param group is unused.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-32

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.35

zxAnAclIpv6HybridDestIpGrpName

Name of the ACL rule parameter group for destination IP.
Empty string means the rule param group is unused.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-32

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.36

zxAnAclIpv6HybridIcmpTypeOper

Specifies how an ICMP type is to be compared.

If the zxAnAclIpv6HybridIpProto object in the same row does not
indicate ICMPv6(58), this object has to be 'none(1)' and cannot
be changed.

'…

ZxAnAclOperatorr/w

Type Values:

1	none
2	equal
3	greater
4	less
5	range

Description:

Indicates how an numeric object is to be compared.
none(1) means that no comparison is to be made with the object.

equal(2) means equal,
greater(3) means greater than or equal,
less(4) means less than or eq…

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.37

zxAnAclIpv6HybridStartIcmpType

Specifies the ICMP type starting value to be matched against.
A value of '0xFF' indicates not care about this field.
If the zxAnAclIpv6HybridIpProto object in the same row does not
indicate ICMPv6(58) or zxAnAclIpv6Hyb…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.38

zxAnAclIpv6HybridEndIcmpType

Specifies the ICMP type ending value to be matched against.
A value of '0xFF' indicates not care about this field.
If the zxAnAclIpv6HybridIpProto object in the same row does not
indicate ICMPv6(58) or zxAnAclIpv6Hybri…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.39

zxAnAclIpv6HybridTimeRangeName

Name of the time range.
Empty string means all the time the rule is valid.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-32

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.45

zxAnAclIpv6HybridRowStatus

The status of this conceptual row.
The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.
To create a row in this table, a manager must set this object to
createAndGo(4), and must compl…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.50

zxAnAclTimeRangeTable

table

.1.3.6.1.4.1.3902.1082.70.15.2.3.2 · 1 row entry · 8 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxAnAclTimeRangeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclTimeRangeTable'

ACL time range table.

zxAnAclTimeRangeEntry row .1.3.6.1.4.1.3902.1082.70.15.2.3.2.1

ACL time range entry.

Indexes

zxAnAclTimeRangeName

Column Syntax OID

zxAnAclTimeRangeName

Name of the time range.

SNMPv2-TCDisplayString

Constraints:
range: 1-32

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.1

zxAnAclTimeRangeType

For example:
onlyOnce: from 10:01:01 05-01-2007 to 12:01:01 05-01-2007
weekly: 14:00:00 to 22:00:00 friday.

Enumerationr/w

Enumerated Values:

1	onlyOnce
2	weekly

.1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.2

zxAnAclOnceStartTime

Once range start time.

SNMPv2-TCDateAndTimer/w

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.3

zxAnAclOnceEndTime

Once range end time.

SNMPv2-TCDateAndTimer/w

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.4

zxAnAclWeeklyDay

Week day of the weekly time range.

Bitsr/w

Enumerated Values:

0	sunday
1	monday
2	tuesday
3	wednesday
4	thursday
5	friday
6	saturday

.1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.5

zxAnAclWeeklyStartTime

Week range start time.
For example: HH:MM:SS.(02:22:33).

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-8

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.6

zxAnAclWeeklyEndTime

Week range end time.
For example: HH:MM:SS.(02:22:33).

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-8

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.7

zxAnAclTimeRangeRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.50

zxAnAclIfConfTable

table

.1.3.6.1.4.1.3902.1082.70.15.2.4.2 · 1 row entry · 3 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxAnAclIfConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclIfConfTable'

This table is to provide service that a specific Acl apply to 
a specific inteface with direction. 
          
Then the traffic that through this interface is managed 
according to the acl.

zxAnAclIfConfEntry row .1.3.6.1.4.1.3902.1082.70.15.2.4.2.1

An entry in zxAnAclIfConfTable.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNM…

Indexes

IF-MIBifIndex ZTE-AN-IF-MIBzxAnSubIfIndex zxAnAclIfConfDirection

Column Syntax OID

zxAnAclIfConfDirection

Indicates whether this row's parameters are to be applied
for ingress or for egress traffic.

Enumeration

Enumerated Values:

1	ingress
2	egress

.1.3.6.1.4.1.3902.1082.70.15.2.4.2.1.1

zxAnAclIfConfAclNumber

The number of an ACL.
Reference to the description of zxAnAclNumber.

Integer32r/w

Constraints:
range: 1-699

.1.3.6.1.4.1.3902.1082.70.15.2.4.2.1.2

zxAnAclIfConfRowStatus

The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.4.2.1.50

zxAnAclRuleParamGroupTable

table

.1.3.6.1.4.1.3902.1082.70.15.2.5.1 · 1 row entry · 3 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxAnAclRuleParamGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclRuleParamGroupTable'

ACL rule parameter group table.

zxAnAclRuleParamGroupEntry row .1.3.6.1.4.1.3902.1082.70.15.2.5.1.1

ACL rule parameter group entry.

Indexes

zxAnAclRuleParamGroupName

Column Syntax OID

zxAnAclRuleParamGroupName

ACL rule parameter group name.

SNMPv2-TCDisplayString

Constraints:
range: 1-32

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.1082.70.15.2.5.1.1.1

zxAnAclRuleParamGroupType

ACL rule parameter group type.
ip(1): IP.

Enumerationr/w

Enumerated Values:

.1.3.6.1.4.1.3902.1082.70.15.2.5.1.1.2

zxAnAclRuleParamGroupRowStatus

The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1082.70.15.2.5.1.1.50

zxAnAclRuleIpGroupTable

table

.1.3.6.1.4.1.3902.1082.70.15.2.5.2 · 1 row entry · 6 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxAnAclRuleIpGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclRuleIpGroupTable'