ISDN-MIB Table View

Table containing configuration and operational
parameters for all physical Basic Rate
interfaces on this managed device.

isdnBasicRateEntry row .1.3.6.1.2.1.10.20.1.1.1.1

An entry in the ISDN Basic Rate Table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
isdnBasicRateIfType The physical interface type. For 'S/T' interfaces, also called 'Four-wire Basic Access Interface', the value of this object is isdns(75). For 'U' interfaces, also called 'Two-wire Basic Access Interface', the value of t…	Enumerationr/w Enumerated Values: 75 isdns 76 isdnu	.1.3.6.1.2.1.10.20.1.1.1.1.1
isdnBasicRateLineTopology The line topology to be used for this interface. Note that setting isdnBasicRateIfType to isdns(75) does not necessarily mean a line topology of point-to-multipoint.	Enumerationr/w Enumerated Values: 1 pointToPoint 2 pointToMultipoint	.1.3.6.1.2.1.10.20.1.1.1.1.2
isdnBasicRateIfMode The physical interface mode. For TE mode, the value of this object is te(1). For NT mode, the value of this object is nt(2).	Enumerationr/w Enumerated Values: 1 te 2 nt	.1.3.6.1.2.1.10.20.1.1.1.1.3
isdnBasicRateSignalMode The signaling channel operational mode for this interface. If active(1) there is a signaling channel on this interface. If inactive(2) a signaling channel is not available.	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.2.1.10.20.1.1.1.1.4

This table defines port specific operational, statistics
          
and active call data for ISDN B channels. Each entry
in this table describes one B (bearer) channel.

isdnBearerEntry row .1.3.6.1.2.1.10.20.1.2.1.1

Operational and statistics information relating to
one port. A port is a single B channel.

Indexes

IF-MIBifIndex

Column	Syntax	OID
isdnBearerChannelType The B channel type. If the B channel is connected to a dialup line, this object has a value of dialup(1). In this case, it is controlled by an associated signaling channel. If the B channel is connected to a leased line…	Enumerationr/w Enumerated Values: 1 dialup 2 leased	.1.3.6.1.2.1.10.20.1.2.1.1.1
isdnBearerOperStatus The current call control state for this port. idle(1): The B channel is idle. No call or call attempt is going on. connecting(2): A connection attempt (outgoing call) is being made on…	Enumeration Enumerated Values: 1 idle 2 connecting 3 connected 4 active	.1.3.6.1.2.1.10.20.1.2.1.1.2
isdnBearerChannelNumber The identifier being used by a signaling protocol to identify this B channel, also referred to as B channel number. If the Agent also supports the DS0 MIB, the values of isdnBearerChannelNumber and dsx0Ds0Number must be…	Integer32 Constraints: range: 1-30	.1.3.6.1.2.1.10.20.1.2.1.1.3
isdnBearerPeerAddress The ISDN address the current or last call is or was connected to. In some cases, the format of this information can not be predicted, since it largely depends on the type of switch or PBX the device is co…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.20.1.2.1.1.4
isdnBearerPeerSubAddress The ISDN subaddress the current or last call is or was connected to. The subaddress is an user supplied string of up to 20 IA5 characters and is transmitted transparently through the network. …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.20.1.2.1.1.5
isdnBearerCallOrigin The call origin for the current or last call. If since system startup there was no call on this interface, this object has a value of unknown(1).	Enumeration Enumerated Values: 1 unknown 2 originate 3 answer 4 callback	.1.3.6.1.2.1.10.20.1.2.1.1.6
isdnBearerInfoType The Information Transfer Capability for the current or last call. speech(2) refers to a non-data connection, whereas audio31(6) and audio7(7) refer to data mode connections. Note that Q.931…	Enumeration Enumerated Values: 1 unknown 2 speech 3 unrestrictedDigital 4 unrestrictedDigital56 5 restrictedDigital 6 audio31 7 audio7 8 video 9 packetSwitched	.1.3.6.1.2.1.10.20.1.2.1.1.7
isdnBearerMultirate This flag indicates if the current or last call used multirate. The actual information transfer rate, in detail specified in octet 4.1 (rate multiplier), is the sum of all B channel ifSpeed values for the hyperchannel. …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.20.1.2.1.1.8
isdnBearerCallSetupTime The value of sysUpTime when the ISDN setup message for the current or last call was sent or received. If since system startup there has been no call on this interface, this object has a value of zero.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.20.1.2.1.1.9
isdnBearerCallConnectTime The value of sysUpTime when the ISDN connect message for the current or last call was sent or received. If since system startup there has been no call on this interface, this object has a value of zero.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.20.1.2.1.1.10
isdnBearerChargedUnits The number of charged units for the current or last connection. For incoming calls or if charging information is not supplied by the switch, the value of this object is zero.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.20.1.2.1.1.11

ISDN signaling table containing configuration and
operational parameters for all ISDN signaling
channels on this managed device.

isdnSignalingEntry row .1.3.6.1.2.1.10.20.1.3.2.1

An entry in the ISDN Signaling Table. To create a new
entry, only isdnSignalingProtocol needs to be specified
before isdnSignalingStatus can become active(1).

Indexes

isdnSignalingIndex

Column	Syntax	OID
isdnSignalingIndex The index value which uniquely identifies an entry in the isdnSignalingTable.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.10.20.1.3.2.1.1
isdnSignalingIfIndex The ifIndex value of the interface associated with this signaling channel.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.20.1.3.2.1.2
isdnSignalingProtocol The particular protocol type supported by the switch providing access to the ISDN network to which this signaling channel is connected.	IsdnSignalingProtocolr/w Type Values: 1 other 2 dss1 3 etsi 4 dass2 5 ess4 6 ess5 7 dms100 8 dms250 9 ni1 10 ni2 11 ni3 12 vn2 13 vn3 14 vn4 15 vn6 16 kdd 17 ins64 18 ins1500 19 itr6 20 cornet 21 ts013 22 ts014 23 qsig 24 swissnet2 25 swissnet3	.1.3.6.1.2.1.10.20.1.3.2.1.3
isdnSignalingCallingAddress The ISDN Address to be assigned to this signaling channel. More specifically, this is the 'Calling Address information element' as being passed to the switch in outgoing call setup messages. It can be an …	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.20.1.3.2.1.4
isdnSignalingSubAddress Supplementary information to the ISDN address assigned to this signaling channel. Usually, this is the subaddress as defined in Q.931. If there is no such number defined or required, this is a zero length string. The su…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.20.1.3.2.1.5
isdnSignalingBchannelCount The total number of B channels (bearer channels) managed by this signaling channel. The default value of this object depends on the physical interface type and is either 2 for Basic Rate interfaces or 24 …	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.10.20.1.3.2.1.6
isdnSignalingInfoTrapEnable Indicates whether isdnMibCallInformation traps should be generated for calls on this signaling channel.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.10.20.1.3.2.1.7
isdnSignalingStatus This object is used to create and delete rows in the isdnSignalingTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.20.1.3.2.1.8

ISDN signaling table containing statistics
information for all ISDN signaling channels
on this managed device.
Only statistical information which is not already being
counted in the ifTable is being defined in this table.

isdnSignalingStatsEntry row .1.3.6.1.2.1.10.20.1.3.3.1

An entry in the ISDN Signaling statistics Table.

Indexes

No indexes recorded

Column	Syntax	OID
isdnSigStatsInCalls The number of incoming calls on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.20.1.3.3.1.1
isdnSigStatsInConnected The number of incoming calls on this interface which were actually connected.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.20.1.3.3.1.2
isdnSigStatsOutCalls The number of outgoing calls on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.20.1.3.3.1.3
isdnSigStatsOutConnected The number of outgoing calls on this interface which were actually connected.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.20.1.3.3.1.4
isdnSigStatsChargedUnits The number of charging units on this interface since system startup. Only the charging units applying to the local interface, i.e. for originated calls or for calls with 'Reverse charging' being active, are counted here.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.20.1.3.3.1.5

Table containing configuration and statistics
information for all LAPD (D channel Data Link)
interfaces on this managed device.
Only statistical information which is not already being
counted in the ifTable is being defined in this table.

isdnLapdEntry row .1.3.6.1.2.1.10.20.1.3.4.1

An entry in the LAPD Table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
isdnLapdPrimaryChannel If set to true(1), this D channel is the designated primary D channel if D channel backup is active. There must be exactly one primary D channel configured. If D channel backup is not used, this object ha…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.20.1.3.4.1.1
isdnLapdOperStatus The operational status of this interface: inactive all layers are inactive l1Active layer 1 is activated, layer 2 datalink not established l2Active layer 1 is activated, layer 2 dat…	Enumeration Enumerated Values: 1 inactive 2 l1Active 3 l2Active	.1.3.6.1.2.1.10.20.1.3.4.1.2
isdnLapdPeerSabme The number of peer SABME frames received on this interface. This is the number of peer-initiated new connections on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.20.1.3.4.1.3
isdnLapdRecvdFrmr The number of LAPD FRMR response frames received. This is the number of framing errors on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.20.1.3.4.1.4

Table containing configuration for Terminal
Endpoints.

isdnEndpointEntry row .1.3.6.1.2.1.10.20.1.4.2.1

An entry in the Terminal Endpoint Table. The value
of isdnEndpointIfType must be supplied for a row
in this table to become active.

Indexes

isdnEndpointIndex

Column	Syntax	OID
isdnEndpointIndex The index value which uniquely identifies an entry in the isdnEndpointTable.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.10.20.1.4.2.1.1
isdnEndpointIfIndex The ifIndex value of the interface associated with this Terminal Endpoint.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.20.1.4.2.1.2
isdnEndpointIfType The interface type for this Terminal Endpoint. Interface types of x25ple(40) and isdn(63) are allowed. The interface type is identical to the value of ifType in the associated ifEntry.	IANAifType-MIBIANAifTyper/w Type Values: 1 other 2 regular1822 3 hdh1822 4 ddnX25 5 rfc877x25 6 ethernetCsmacd 7 iso88023Csmacd 8 iso88024TokenBus 9 iso88025TokenRing 10 iso88026Man 11 starLan 12 proteon10Mbit 13 proteon80Mbit 14 hyperchannel 15 fddi 16 lapb 17 sdlc 18 ds1 19 e1 20 basicISDN 21 primaryISDN 22 propPointToPointSerial 23 ppp 24 softwareLoopback 25 eon 26 ethernet3Mbit 27 nsip 28 slip 29 ultra 30 ds3 31 sip 32 frameRelay 33 rs232 34 para 35 arcnet 36 arcnetPlus 37 atm 38 miox25 39 sonet 40 x25ple 41 iso88022llc 42 localTalk 43 smdsDxi 44 frameRelayService 45 v35 46 hssi 47 hippi 48 modem 49 aal5 50 sonetPath 51 sonetVT 52 smdsIcip 53 propVirtual 54 propMultiplexor 55 ieee80212 56 fibreChannel 57 hippiInterface 58 frameRelayInterconnect 59 aflane8023 60 aflane8025 61 cctEmul 62 fastEther 63 isdn 64 v11 65 v36 66 g703at64k 67 g703at2mb 68 qllc 69 fastEtherFX 70 channel 71 ieee80211 72 ibm370parChan 73 escon 74 dlsw 75 isdns 76 isdnu 77 lapd 78 ipSwitch 79 rsrb 80 atmLogical 81 ds0 82 ds0Bundle 83 bsc 84 async 85 cnr 86 iso88025Dtr 87 eplrs 88 arap 89 propCnls 90 hostPad 91 termPad 92 frameRelayMPI 93 x213 94 adsl 95 radsl 96 sdsl 97 vdsl 98 iso88025CRFPInt 99 myrinet 100 voiceEM 101 voiceFXO 102 voiceFXS 103 voiceEncap 104 voiceOverIp 105 atmDxi 106 atmFuni 107 atmIma 108 pppMultilinkBundle 109 ipOverCdlc 110 ipOverClaw 111 stackToStack 112 virtualIpAddress 113 mpc 114 ipOverAtm 115 iso88025Fiber 116 tdlc 117 gigabitEthernet 118 hdlc 119 lapf 120 v37 121 x25mlp 122 x25huntGroup 123 transpHdlc 124 interleave 125 fast 126 ip 127 docsCableMaclayer 128 docsCableDownstream 129 docsCableUpstream 130 a12MppSwitch 131 tunnel 132 coffee 133 ces 134 atmSubInterface 135 l2vlan 136 l3ipvlan 137 l3ipxvlan 138 digitalPowerline 139 mediaMailOverIp 140 dtm 141 dcn 142 ipForward 143 msdsl 144 ieee1394 145 if-gsn 146 dvbRccMacLayer 147 dvbRccDownstream 148 dvbRccUpstream 149 atmVirtual 150 mplsTunnel 151 srp 152 voiceOverAtm 153 voiceOverFrameRelay 154 idsl 155 compositeLink 156 ss7SigLink 157 propWirelessP2P 158 frForward 159 rfc1483 160 usb 161 ieee8023adLag 162 bgppolicyaccounting 163 frf16MfrBundle 164 h323Gatekeeper 165 h323Proxy 166 mpls 167 mfSigLink 168 hdsl2 169 shdsl 170 ds1FDL 171 pos 172 dvbAsiIn 173 dvbAsiOut 174 plc 175 nfas 176 tr008 177 gr303RDT 178 gr303IDT 179 isup 180 propDocsWirelessMaclayer 181 propDocsWirelessDownstream 182 propDocsWirelessUpstream 183 hiperlan2 184 propBWAp2Mp 185 sonetOverheadChannel 186 digitalWrapperOverheadChannel 187 aal2 188 radioMAC 189 atmRadio 190 imt 191 mvl 192 reachDSL 193 frDlciEndPt 194 atmVciEndPt 195 opticalChannel 196 opticalTransport 197 propAtm 198 voiceOverCable 199 infiniband 200 teLink 201 q2931 202 virtualTg 203 sipTg 204 sipSig 205 docsCableUpstreamChannel 206 econet 207 pon155 208 pon622 209 bridge 210 linegroup 211 voiceEMFGD 212 voiceFGDEANA 213 voiceDID 214 mpegTransport 215 sixToFour 216 gtp 217 pdnEtherLoop1 218 pdnEtherLoop2 219 opticalChannelGroup 220 homepna 221 gfp 222 ciscoISLvlan 223 actelisMetaLOOP 224 fcipLink 225 rpr 226 qam 227 lmp 228 cblVectaStar 229 docsCableMCmtsDownstream 230 adsl2 231 macSecControlledIF 232 macSecUncontrolledIF 233 aviciOpticalEther 234 atmbond 235 voiceFGDOS 236 mocaVersion1 237 ieee80216WMAN 238 adsl2plus 239 dvbRcsMacLayer 240 dvbTdm 241 dvbRcsTdma 242 x86Laps 243 wwanPP 244 wwanPP2 245 voiceEBS 246 ifPwType 247 ilan 248 pip 249 aluELP 250 gpon 251 vdsl2 252 capwapDot11Profile 253 capwapDot11Bss 254 capwapWtpVirtualRadio 255 bits 256 docsCableUpstreamRfPort 257 cableDownstreamRfPort 258 vmwareVirtualNic 259 ieee802154 260 otnOdu 261 otnOtu 262 ifVfiType 263 g9981 264 g9982 265 g9983 266 aluEpon 267 aluEponOnu 268 aluEponPhysicalUni 269 aluEponLogicalLink 270 aluGponOnu 271 aluGponPhysicalUni 272 vmwareNicTeam 277 docsOfdmDownstream 278 docsOfdmaUpstream 279 gfast 280 sdci 281 xboxWireless 282 fastdsl 283 docsCableScte55d1FwdOob 284 docsCableScte55d1RetOob 285 docsCableScte55d2DsOob 286 docsCableScte55d2UsOob 287 docsCableNdf 288 docsCableNdr 289 ptm 290 ghn 291 otnOtsi 292 otnOtuc 293 otnOduc 294 otnOtsig 295 microwaveCarrierTermination 296 microwaveRadioLinkTerminal 297 ieee8021axDrni 298 ax25 299 ieee19061nanocom 300 cpri 301 omni 302 roe 303 p2pOverLan	.1.3.6.1.2.1.10.20.1.4.2.1.3
isdnEndpointTeiType The type of TEI (Terminal Endpoint Identifier) used for this Terminal Endpoint. In case of dynamic(1), the TEI value is selected by the switch. In case of static(2), a valid TEI value has to be entered in the isdnEndpoi…	Enumerationr/w Enumerated Values: 1 dynamic 2 static	.1.3.6.1.2.1.10.20.1.4.2.1.4
isdnEndpointTeiValue The TEI (Terminal Endpoint Identifier) value for this Terminal Endpoint. If isdnEndpointTeiType is set to static(2), valid numbers are 0..63, while otherwise the value is set internally. The default value of this object…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.2.1.10.20.1.4.2.1.5
isdnEndpointSpid The Service profile IDentifier (SPID) information for this Terminal Endpoint. The SPID is composed of 9-20 numeric characters. This information has to be defined in addition to the local nu…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.20.1.4.2.1.6
isdnEndpointStatus This object is used to create and delete rows in the isdnEndpointTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.20.1.4.2.1.7

Table containing Directory Numbers.

isdnDirectoryEntry row .1.3.6.1.2.1.10.20.1.5.1.1

An entry in the Directory Number Table. All objects
in an entry must be set for a new row to become active.

Indexes

isdnDirectoryIndex

Column	Syntax	OID
isdnDirectoryIndex The index value which uniquely identifies an entry in the isdnDirectoryTable.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.10.20.1.5.1.1.1
isdnDirectoryNumber A Directory Number. Directory Numbers are used to identify incoming calls on the signaling channel given in isdnDirectorySigIndex. The format of this information largely depends on the type of switch or P…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.20.1.5.1.1.2
isdnDirectorySigIndex An index pointing to an ISDN signaling channel. Incoming calls are accepted on this signaling channel if the isdnDirectoryNumber is presented as Called Number in the SETUP message.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.2.1.10.20.1.5.1.1.3
isdnDirectoryStatus This object is used to create and delete rows in the isdnDirectoryTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.20.1.5.1.1.4