ISDN-MIB

        The MIB module to describe the
management of ISDN interfaces.
    
Source file
ISDN-MIB
Last revised
Identity
isdnMib
Base OID
1.3.6.1.2.1.10.20
Imported Objects
IANAifType-MIB IANAifType
IF-MIB ifIndex InterfaceIndex
RFC1213-MIB transmission
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DisplayString RowStatus TestAndIncr TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the zhone MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ISDN-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ISDN-MIB::isdnMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ISDN-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ISDN-MIB::isdnMib'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (70)
.1.3.6.1.2.1.10.20
.1.3.6.1.2.1.10.20.1
.1.3.6.1.2.1.10.20.1.1
.1.3.6.1.2.1.10.20.1.1.1
.1.3.6.1.2.1.10.20.1.1.1.1
Enumeration
.1.3.6.1.2.1.10.20.1.1.1.1.1
Enumeration
.1.3.6.1.2.1.10.20.1.1.1.1.2
Enumeration
.1.3.6.1.2.1.10.20.1.1.1.1.3
Enumeration
.1.3.6.1.2.1.10.20.1.1.1.1.4
.1.3.6.1.2.1.10.20.1.2
.1.3.6.1.2.1.10.20.1.2.1
.1.3.6.1.2.1.10.20.1.2.1.1
Enumeration
.1.3.6.1.2.1.10.20.1.2.1.1.1
.1.3.6.1.2.1.10.20.1.2.1.1.10
.1.3.6.1.2.1.10.20.1.2.1.1.11
Enumeration
.1.3.6.1.2.1.10.20.1.2.1.1.2
Integer32
.1.3.6.1.2.1.10.20.1.2.1.1.3
.1.3.6.1.2.1.10.20.1.2.1.1.4
.1.3.6.1.2.1.10.20.1.2.1.1.5
Enumeration
.1.3.6.1.2.1.10.20.1.2.1.1.6
Enumeration
.1.3.6.1.2.1.10.20.1.2.1.1.7
.1.3.6.1.2.1.10.20.1.2.1.1.8
.1.3.6.1.2.1.10.20.1.2.1.1.9
.1.3.6.1.2.1.10.20.1.3
.1.3.6.1.2.1.10.20.1.3.1
.1.3.6.1.2.1.10.20.1.3.2
.1.3.6.1.2.1.10.20.1.3.2.1
Integer32
.1.3.6.1.2.1.10.20.1.3.2.1.1
.1.3.6.1.2.1.10.20.1.3.2.1.2
.1.3.6.1.2.1.10.20.1.3.2.1.3
.1.3.6.1.2.1.10.20.1.3.2.1.4
.1.3.6.1.2.1.10.20.1.3.2.1.5
Integer32
.1.3.6.1.2.1.10.20.1.3.2.1.6
Enumeration
.1.3.6.1.2.1.10.20.1.3.2.1.7
.1.3.6.1.2.1.10.20.1.3.2.1.8
.1.3.6.1.2.1.10.20.1.3.3
.1.3.6.1.2.1.10.20.1.3.3.1
.1.3.6.1.2.1.10.20.1.3.3.1.1
.1.3.6.1.2.1.10.20.1.3.3.1.2
.1.3.6.1.2.1.10.20.1.3.3.1.3
.1.3.6.1.2.1.10.20.1.3.3.1.4
.1.3.6.1.2.1.10.20.1.3.3.1.5
.1.3.6.1.2.1.10.20.1.3.4
.1.3.6.1.2.1.10.20.1.3.4.1
.1.3.6.1.2.1.10.20.1.3.4.1.1
Enumeration
.1.3.6.1.2.1.10.20.1.3.4.1.2
.1.3.6.1.2.1.10.20.1.3.4.1.3
.1.3.6.1.2.1.10.20.1.3.4.1.4
.1.3.6.1.2.1.10.20.1.4
.1.3.6.1.2.1.10.20.1.4.1
.1.3.6.1.2.1.10.20.1.4.2
.1.3.6.1.2.1.10.20.1.4.2.1
Integer32
.1.3.6.1.2.1.10.20.1.4.2.1.1
.1.3.6.1.2.1.10.20.1.4.2.1.2
.1.3.6.1.2.1.10.20.1.4.2.1.3
Enumeration
.1.3.6.1.2.1.10.20.1.4.2.1.4
Integer32
.1.3.6.1.2.1.10.20.1.4.2.1.5
.1.3.6.1.2.1.10.20.1.4.2.1.6
.1.3.6.1.2.1.10.20.1.4.2.1.7
.1.3.6.1.2.1.10.20.1.5
.1.3.6.1.2.1.10.20.1.5.1
.1.3.6.1.2.1.10.20.1.5.1.1
Integer32
.1.3.6.1.2.1.10.20.1.5.1.1.1
.1.3.6.1.2.1.10.20.1.5.1.1.2
Integer32
.1.3.6.1.2.1.10.20.1.5.1.1.3
.1.3.6.1.2.1.10.20.1.5.1.1.4
.1.3.6.1.2.1.10.20.2
.1.3.6.1.2.1.10.20.2.0
.1.3.6.1.2.1.10.20.2.1
.1.3.6.1.2.1.10.20.2.2
Dependencies (9) 6 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. RFC-1212rfc
  8. RFC1155-SMIrfc
  9. RFC1213-MIBrfc
  10. ISDN-MIBzhoneselected
Type Definitions (1)
Enumeration
other(1)
dss1(2)
etsi(3)
dass2(4)
ess4(5)
ess5(6)
dms100(7)
dms250(8)
ni1(9)
ni2(10)
ni3(11)
vn2(12)
vn3(13)
vn4(14)
vn6(15)
kdd(16)
ins64(17)
ins1500(18)
itr6(19)
cornet(20)
ts013(21)
ts014(22)
qsig(23)
swissnet2(24)
swissnet3(25)
Conformance Groups (6)
A collection of objects required for ISDN Basic Rate
physical interface configuration and statistics.
.1.3.6.1.2.1.10.20.2.2.1
A collection of objects required for ISDN Bearer channel
control and statistics.
.1.3.6.1.2.1.10.20.2.2.2
A collection of objects required for ISDN D channel
configuration and statistics.
.1.3.6.1.2.1.10.20.2.2.3
A collection of objects describing Terminal Endpoints.
.1.3.6.1.2.1.10.20.2.2.4
A collection of objects describing directory numbers.
.1.3.6.1.2.1.10.20.2.2.5
The notifications which a ISDN MIB entity is
required to implement.
.1.3.6.1.2.1.10.20.2.2.6
Compliance Statements (1)

OID .1.3.6.1.2.1.10.20.2.1.1
The compliance statement for entities which implement
the ISDN MIB.
Required groups
mandatory isdnMibSignalingGroup
mandatory isdnMibBearerGroup
mandatory isdnMibNotificationsGroup
optional isdnMibBasicRateGroup The isdnMibBasicRateGroup is mandatory for entities
supporting ISDN Basic Rate interfaces.
optional isdnMibEndpointGroup Implementation of this group is optional for all systems
that attach to ISDN interfaces.
optional isdnMibDirectoryGroup Implementation of this group is optional for all systems
that attach to ISDN interfaces.
Object refinements
ObjectAccessSyntaxDescription
isdnBasicRateIfType readonly
It is conformant to implement this object as read-only.
isdnBasicRateLineTopology readonly
It is conformant to implement this object as read-only.
isdnBasicRateIfMode readonly
It is conformant to implement this object as read-only.
isdnBasicRateSignalMode readonly
It is conformant to implement this object as read-only.
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.2.1.10.20.2.0.1
This trap/inform is sent to the manager under the
following condidions:
- on incoming calls for each call which is rejected for
policy reasons (e.g. unknown neighbor or access
violation)
- on outgoing calls whenever a call attempt is determined
to have ultimately failed. In the event that call retry
is active, then this will be after all retry attempts
have failed.
- whenever a call connects. In this case, the object
isdnBearerCallConnectTime should be included in the
trap.

Only one such trap is sent in between successful or
unsuccessful call attempts from or to a single neighbor;
subsequent call attempts result in no trap.

If the Dial Control MIB objects dialCtlNbrCfgId and
dialCtlNbrCfgIndex are known by the entity generating
this trap, both objects should be included in the trap
as well. The receipt of this trap with no dial neighbor
information indicates that the manager must poll the
callHistoryTable of the Dial Control MIB to see what
changed.